GHK GEN. 5 Glock Series: General First Impression (1/?)

[@felipeleon9273]

Hey bro Very nice video. Can you please tell me if Ghk glock 17 gen 5 slide is made of cnc aluminium? As far as i know ghk gen5 material is a little better than vfc glocks ☺️. Thanks in advance

[@ka52alligator]

Mine trigge's weight is over 11lbs, near not possible to trigger, need to do some adjustment to soften the spring

[@marquezvanroeschen5340]

Good morning from Austria 🤗

[@markuskhan3492]

Lucky guy men i am very happy for you first English review i see , Sadly we in germany can’t buy airsoft guns from Asia because like always the law Greetings from germany 🇩🇪

[@ken2tintoo]

41:15 says everything! LOL!

[@simonstokes369]

Some sort of c clip would work? Might need to make a slot for it on the pin.

[@TheEvdavis7]

Would you recommend this one or the TM dessert Eagle ? Trying to decide . And how to you get the orange tip off the Glock without damaging the gun for the Glock ?

[@KnucklesGSM]

Two very different guns - you need to decide that one for yourself and what the purpose will be for. You have to a heatgun or blowdryer and pull it off

[@theoscott5266]

Thanks for another vid. Next time you order from Samoon get yourself the pen loader. Makes loading the mag a breeze (or drill a hole so you can hold down the follower).

[@KnucklesGSM]

Thanks for that! I will check it out immediately. I've hated loading and testing the GHK gen 3 for the last months.

[@mauka-qx5iv]

should I get this or get a steel vfc?

[@morisato54]

How's the recoil compared to a Volante Stratos?

[@shmegladon]

Can you do a KJW Shadow 2 Orange review/impression?

[@TheEvdavis7]

Also where you order this one from ?

[@KnucklesGSM]

I ordered this from samoon.com.tw/

[@TurkishBenAirsoft]

I was told by a GHK dealer that you dont need the ultimate kit to run co2. They are already built to be strong enough for co2.

[@KnucklesGSM]

Probably could but it would just fast track to breaking. The C02 is powerful, its no joke.

[@andersnoren6070]

It's not the mag that makes it difficult to fill with BB's. It's the speedloader that GHK makes. Take off the adapter and put it on a better quality speedloader. It won't hang up like that.

[@KnucklesGSM]

Whats a better quality speedloader you'd recommend thats a small form factor? I gotta be honest, I've only used those ones, the m4 speed loader, and now the 3d printed ones with the odin. Someone recommended the GHK pen loader so I'll pick that up

[@andersnoren6070]

@@KnucklesGSM Mine is an old pistol mag-shaped one. I bought it years ago and I don't remember where I got it. But it feeds into both Glock and M4 mags just fine with the GHK adapter while I get the same issues as you did with the GHK speed loaders. Hopefully the pen loader does the trick. It would be great if you could include an update on that in a future video 😉

[@8man_01]

@@KnucklesGSM idk if it's compact enough for you and i've never owned GHK mags of any kind, but the Dragon/Dinosaur BB Loader I got made it easy to load my TM AKM mags, which were a b*tch to load and destroyed those generic bb loaders like the one you used. Had to use the included tube loader before I got the Dragon one. downside is it looks like a d**do lmao

[@TurkishBenAirsoft]

TM ones are the best pistol loaders

[@Leongenic]

I just got mines today. However, mines I am unable to rack the slide as it seems stuck. Any ideas on what could be blocking my slide?

[@KnucklesGSM]

Film it first of all, hopefully you filmed it from the very beginning if anything to protect yourself. If I had to think of anything, probably the barrel lugs on the bottom/slide lock. Trying playing around with it and once you can get it to rack once, get it off immediately so you can figure out exactly whats hitting it

[@Leongenic]

@@KnucklesGSM I found out what it was. I had the remove the orange tip the shop attached to the barrel (bought it from ProAct). The orange tip wasn’t letting the hop up unit seat in the outer barrel. The outer barrel couldn’t move at all preventing the slide from being able to rack. Glad it is running well now and I can’t wait to see what ideas you have for this pistol.

[@darkoflight4938]

So this has not the steel slide? Are there different versions steel one and a aluminium (or whatever chinesium it might be)? Yes, I was born confused and oh look at that hop-up disintigrate!

[@KnucklesGSM]

I wanted the alum version. and the build quality feels good honestly minus the hopup unit, you can get a steel slide

[@Frambhueee]

Were do you get it dude?, In WGC said "selling only asia market"

[@KnucklesGSM]

i preordered it from samoon not sure how i even got it lmao

[@Frambhueee]

@@KnucklesGSM damn... XD

[@SIXMMCUSTOM]

Is it possible, that the Gen 5 comes as an aluminum version, because Taiwan changed their gun law, so it’s not allowed for them to produce complete Steel Slide guns?

[@KnucklesGSM]

I know there is a steel version coming out soon, I saw it somewhere but I think they released the alum version because they are trying to appeal to a larger audience this time around (the price difference is huge vs the steel one).

[@SIXMMCUSTOM]

@@KnucklesGSM And this was also my first thought, that they wanted to reach a bigger audience, but i also know from an Insider from UMAREX, that actually it was planned like how they’ve made it with the Gen 3, first Steel, then a similar aluminum version, also CNC-forged, the only difference to the Steel one was the material, beyond that, they were 100% similar. Also, the Gen 5 Aluminum Slide is neither CNC forged, it’s actually the Aluminum/zinc alloy like the standard VFC/TM/WE Slides are made of, also the RMR adapter plates* are very poor quality, so i think it’s really connected to the new gun law in Taiwan… (* there will be also steel Adapter plates from way better quality, probably also from BFA ). P.S.: By the way, these are the steel parts which came from BFA yet: www.proactstore.com/products?query=Glock%20BFA%20Steel

[@michaelmccr3294]

I fixed that silver rod issue on mine and lol it shoots straighter then any gbbp I've ever used and had... My secret is I used a broken allen key yes I lengthen it and now it h8lds it much better and it doesn't come out plus the arm it holds it far more stable and stiffer but in order forcme to adjust it I need to take it out and adjust and use my thumb to move the left side to the right angle as it's doesn't move that easy. That for me was a temporary fixed but now I'm keeping it lol. Not joking you 0.25g shoots flush straight over 30 meters no issues on standard inner barrel and bucking so I have no intention changing it out at all

[@swcblad]

@35:47😂

[@MrSupermax2000]

😅

[@sttin168]

G×K 推出的任何產品😂 永遠都係問題多多👎買家自己諗方法解決吧🧐

[@MidWestJigga]

You over filled it abs the gas liquified