GHK Glock 17 Disassembly and Installing RMR red dot

[@xiaojianzeng]

请问滑套上是已经有孔位安装转接吗，我看你拧了许多螺丝

[@Airsoft_forever777]

Hello sir do you think this will harm or break pistol or is it safe? Thanks for the video 😃

[@yataje3751]

Do you have to disassemble the nozzle when installing the mount?

[@junjieairsoft4075]

No, you don’t need to😀

[@yataje3751]

@@junjieairsoft4075 ok good

[@darinparker4520]

滑套上没有螺丝孔，是如何固定红点底座的呢

[@Steven84625]

轉接座卡在後罩門座上

[@trevor062]

Marui的入彈器可以用嗎？

[@s8609099]

好槍一把，感謝分享，小弟還在想要用怎麼裝瞄具 不過原廠給的填彈器有點難用，筆型的比較方便填彈

[@junjieairsoft4075]

嗯，用步枪那种填弹器方便好多👍

[@johannesbjerkejannesson428]

Its seems like the link to the universal mount is offline. Could you tell me the name of the item? Always wanted a rmr on my ghk glock! But i thought that you couldent because of the lavking hole in the notch. Thanks man, great video!

[@lunaseeeeee]

昨天也新入手這把^^ 各方面都覺得很棒～但HOP座就真的想換掉,尤其下壓片光是調整的時候就很明顯看得到位置跑掉,還是換掉好XD

[@junjieairsoft4075]

这样哦，还没下场试过，枫叶的hop座有试过吗？

[@lunaseeeeee]

@@junjieairsoft4075 我都在家打靶紙而已約5～9m的距離，楓葉的明天要去取貨XD換完再試試看效果^_^

[@junjieairsoft4075]

@@lunaseeeeee 期待您的反馈啊

[@lunaseeeeee]

@@junjieairsoft4075 明天就知道了XD

[@lunaseeeeee]

@@junjieairsoft4075 已更換GHK g17專用楓葉hop座及楓力管97mm初次調整測試完後，明顯集中很多，再多調整一下應該可以更集中，個人覺得值得更換^_^

[@fengluo2956]

泪流满面，多得开箱鸽介绍……我也是个在dan麦苦苦挣扎了10几年的Airsoft玩家啊………………咱们要交流一下么…………………………

[@junjieairsoft4075]

@@fengluo2956 可以啊😂只是疫情之后比较忙了，基本没有时间玩了呢

[@fengluo2956]

@@junjieairsoft4075哇哇哇，好啊，我下周度假，回来联系！我就在哥哈北郊，你呢

[@fengluo2956]

@@junjieairsoft4075 放完假，回复正常，哥，怎么联系呢？

[@huangsteven6577]

請問在15:08時, 提到4個栓是先敲好的, 請問要如何敲進去? 好像不是很容易。謝謝。

[@junjieairsoft4075]

从你要安装红点的那一面敲进去，另一面有凸起的卡槽，你可以找两个硬质的金属块，把它架空在上面。要保持水平再敲进去，要用铁锤，橡胶锤不行。不要急，一点一点敲，要保证这个pin不能歪

[@alexanderxie2440]

刚入手这支 我看是不是不需要拆nozzle刘能直接装红点底板 有打算给她上个红点

[@junjieairsoft4075]

不需要拆nozzle，可以直接装底板

[@alexanderxie2440]

@@junjieairsoft4075 明白，感谢

[@柴森雄介-y5o]

How do you install it?

[@陈星云-p3l]

哥们问一下，哪里来的螺丝孔位固定？

[@junjieairsoft4075]

你说的是底板吗？就在底板上有啊？

[@devidwalker7484]

请问原厂不改的情况下能直接玩Co2吗？

[@junjieairsoft4075]

没有试过，但是貌似强度不够，如果原厂直接CO2，应该坚持不了多久。您应该知道沙漠龙有CO2的改装升级套件对吧

[@devidwalker7484]

嗯嗯，听说过，还是买个套件保险点@@junjieairsoft4075

[@黃子翔-r3n]

原廠沒改打co2的話，板機固定座有機會會裂掉甚至爆裂，畢竟原廠是鋅合金，改套是碳鋼不一樣，要打co2的話預算也有限，可以考慮先換板機固定座，其他的就都還好

[@luis-md9fg]

你好，，请问一下，这个底板哪里有卖呀，moj，，谢谢

[@junjieairsoft4075]

aliexpress😃

[@luis-md9fg]

@@junjieairsoft4075 在国内能买到吗🤓

[@junjieairsoft4075]

@@luis-md9fg 不清楚啊兄弟，你TB看看😃

[@luis-md9fg]

@@junjieairsoft4075 哈哈哈哈好的、不知道真品瞄能不能之上，谢谢了哈

[@junjieairsoft4075]

@@luis-md9fg 一般款基本能直上，特殊款的rmr只能找专门的底板了。我用的这个vector的rmr也是可以给真枪用的

[@haojunliao7765]

建議拍近點，有特寫鏡頭更好!!

[@junjieairsoft4075]

以后尽量改进😁

[@雷克恩]

这个在哪里买？😭

[@pneucrever]

On a website called "samoon"

[@midfinger1445]

你好这个电筒什么型号

[@junjieairsoft4075]

surefire X300U

[@285Wolfpack]

is it coming in english sometime soon or because i dont understand the language but if you could add English Subtitles that would be nice :)

[@junjieairsoft4075]

I will add it tomorrow buddy👍😃

[@285Wolfpack]

@@junjieairsoft4075 thanks man hows the g17 working for you?

[@junjieairsoft4075]

@@285Wolfpack just get it in two days, haven’t been to field yet. The quality is good and the recoil is stronger than the normal gas pistol.

[@285Wolfpack]

@@junjieairsoft4075 alright iam a little hesitant to get it with All the problems it has so that is why i ask 😉

[@junjieairsoft4075]

@@285Wolfpack well, I see your point. Will update if there is anything I find

[@mysterm2362]

Good afternoon, how are you. my name is Michel, I am a sports shooter and I would like to know if you can send me these dot sights. shipping is to Brazil, I await your return. thank you so much.