Ghost White Toner Tutorial Part2

[@zachporter3865]

Other than the HP LaserJet Pro M452, what other printers are compatible? Preferably cheaper.

[@thompson1295]

Nice price point versus other white toner printers but still a lot of workflow.

[@Bobster986]

True, but I would first print all the paper, then all all the backing to all of them, then once that is completed just go mad pressing them on to the shirts. That should help speed up production vs doing them step by step one at a time.

[@meghantaggarwal]

u seem not to be answering any but here are three questions 1)when we take out the toners repeatedly won't they just dry off specially in hot and dry conditions of about 100'f 2)if we pre print the A sheets in some no. say about 100 then we change the toner and apply it to the prints will they still be usable or they dry off and the same question with sheet B 3)is the process applicable with A3 printer of the same specifications 4)do we need white toner for single coloured metallic sheets from Forever

[@Buzza235]

If you wanna do just white words do you take all the other cartridges out and just have the white one in?

[@uscuttervideos]

You would just replace the black cartridge with a white cartridge and then leave the CMY toners in. Most of these 4 color laser printers will not run without all four cartridges inside of it. But if you only what to print with white , then you can just leave the CMY cartridges in even when empty and never replace them.

[@Buzza235]

@@uscuttervideos Ok. Thanks for your advice. Appreciate it.

[@jessiejames7364]

Can you just use the white toner for 1 pass? I know CMY becomes black if you have black color in your design. Just wondering if that's possible?

[@uscuttervideos]

If you want to print with just white you could do it in one pass. I was also able to do some basic Red White and Blue images in a single pass but it still did mix a little bit of the white in with each color making them look like pink and a light blue at first. After some tweaking I was able to get it to use less of the white but I did go through about 5 or 6 sheets before getting it right.

[@meghantaggarwal]

please tell about an A3 printer also and is the toner shown in the video can be used in A3 printer also

[@MultistreamMastery]

What is the make and model of that double press!?

[@Bobster986]

Why didn’t you show any closeup shots of the transfers after you pressed them on to the shirts so we can see the finished results? 🤨

[@CondrCondrit]

Perfect offset silhouette studio business

[@Slimliciousm]

Omg thank you I been trying to figure this out and your videos explain it to where I understand I been watching other people’s different videos and they make it so complicated

[@thenanook]

excellent video

[@michaelc6553]

How do you prevent the a sheet from getting scratches when printing

[@spearfishingculture]

Where we can buy a ghost white toner?

[@NeuArtChan]

does this work with normal color toners that came with hp M452nw and a single white ghost toner? Or do I need to buy all Ghost toners? (too expensive...)

[@uscuttervideos]

You can use the regular toners that came with your printer and just swap out the white Ghost toner when needed - it will work.

[@aselsalama2604]

@@uscuttervideos does this work with normal color toners that came with hp M452nw +ghost toner or all toner ghost plz reply

[@uscuttervideos]

@@aselsalama2604 You can use the regular toners that came with your printer and just swap out the white Ghost white toner when needed - it will work.

[@aselsalama2604]

You don't answer.......you not me...you use in this vedio all toner as ghost..plz reply

[@aselsalama2604]

And I know..you know..we know..can use normal toner that came with hp printer

[@StriderVM]

may i ask what kind of paper you use? i mean the transparent paper? what do ypu call that?

[@memathomas123]

forever soft flex laser dark

[@justinnomineetv3943]

is there an alternative white toner cart for this besides the ghost? thats a pretty expensive cartridge to re-fill over and and over

[@Mindyourbusiness762]

Justin NomineeTV I just got mines I paid 320$ but you get like over 2000 pages to print so it’s worth it honestly. 2000 pages is alot at least when I pay 60$ for regular ink I get no where near that and I’m not using the white on every print just for colored shirts so far so good and I got the printer half off on amazon they considered it used but it was brand new in the box.

[@justinnomineetv3943]

Jaivis & Jessica message me sometime I’m really trying to convert but have more questions for someone who uses it often. [e-mail]. Thanks!

[@Mindyourbusiness762]

@@justinnomineetv3943 no problem ill email you today

[@justinnomineetv3943]

Jaivis & Jessica Thanks!!

[@uscuttervideos]

I made a lot of white toner videos on Ghost on my personal youtube page you can find here - kzbin.info/door/VWCvQRIOwcMSWM5xQqP2rw

[@shannanmichael2009]

Do you have a ghost toner that fits the hp color laserjet pro m454dw?

[@uscuttervideos]

There are not any 3rd party cartridge manufacturers making cartridges for the M454DW printer with chips at this time.

[@MrAd1963]

Are these white Hp toner cartridges available in the U.K.?? Can't seem to find them anywhere

[@AlexChassisPVC]

Did this. Wash it one Time and whole the transfer cracked....

[@ericthomas9551]

Alexandru Ostrovan Are you saying the transfer failed after one wash ,

[@AlexChassisPVC]

Yes..it fades and cracks when the print is big.. And there is always an offset that doesnt fits well.

[@guitaraddictsanonymous81]

I almost ordered one this week. You scared me. For a small business few thousand dollar investment in a product that doesnt work is scary thing. I wanted this machine for larger 11 17. So your large print cracked from the 1st wash? so when you print the 2nd time in white the second print doesnt line up?

[@taloc731]

Hey did u get ur cracking problem fixed ?

[@bit-studios1]

Worked perfectly for me. I had no problem with the wash. Make sure you are using genuine Forever Laser Dark No Cut A and B paper. You will get this problem if you are using a counterfeit product.

[@aselsalama2604]

Plz plz....you use printer hp with normal toner hp CMYK + ghost white toner or use all toner as ghost .plz say about you not me.say about your printer toner..

[@uscuttervideos]

use printer hp with normal toner hp CMY + ghost white toner (note: use Ghost White instead of K)

[@volumeup2714]

Amazing video bravo!!

[@uscuttervideos]

This video is so old I still have hair - Here is a better example of how you create a design - kzbin.info/www/bejne/qIG2aqSrZbp8qLs

[@heidiallen261]

Can this be used on HP M454DW (ghost white toner)

[@uscuttervideos]

The current cartridges we sell are shown here: www.uscutter.com/Ghost-Toner-Cartridges It would be impossible to carry cartridges for every printer out there so only select printers are available.

[@Ramellosugahill]

I need printer color density stronger how can I turn up density of color's

[@markpennie5454]

I understand that you need white toner to print white but are the other toner colours standard hp toner cartridges or are those special toner as well.

[@tinataylor9327]

Yes the other 4 cartridges are HP standard colors.

[@markpennie5454]

Ok thank you

[@meghantaggarwal]

hi can u answer my questions ???????

[@aselsalama2604]

@@tinataylor9327 whose say that

[@Chiing2728]

thank you very much

[@chuckblair4035]

thats a lot of work for one print ...

[@uscuttervideos]

The Ghost system is designed to allow a very low cost entry point into the white toner market. If time to complete is more important than cost to set up, Uninet iColor offers a white toner system that can print complex full color with white prints in one step, however it costs significantly more. Having the Ghost White toner system as an option allows the user to decide if time or cost are more important to them.

[@TheXboxSux]

I can see why people pay thousands for DTG printers now...

[@Grafikdetail]

TheXboxSux with the maintenance and clogging, DTG printers are a bigger pain... especially for darks

[@LuisCasstle]

That was just a shitty design. For a fraction of the price, they can do just as good. The iColor anyways.

[@davidanthonybatten9150]

Get on with it woffle woffle woffle!!!!!!!!!!!!!!!!!