Intercepting and Tracking with an HSI

[@jimthepilotguy]

Who hasn't struggled with an HSI...a great instrument for sure....but this ONE video clears us SO much confusion! Great Job!

[@GianLucaNoia]

Well our IFR Procedures Software/App is full of great explanations such as this one, aimed at simplifying the IFR environment. Also all This moth it's 10% off: passfaaexams.com/ifr-procedures-10-off/

[@Corsair8X]

That connecting the needles tip/fact is amazing. Thank you.

[@SR-og8ub]

Brilliant! Thank you so much. This is the best/easiest explanation that I have come across.

[@franciscomoreno-cv3po]

Matching the needle is like matching the heading bug with the tip of needle?

[@tofuComputer]

Clever and easy! Thank you!

[@nreinhart11]

This is awesome info! Thanks!

[@RakeshKumar-dj5pr]

I came across this elsewhere when i was looking up on vor interceptions. What if I am on the 150 radial inbound (course 330) and atc issues me a revision to track inbound on 090 radial? I set this up on an vor simulation and interception happened on the far side ie. On the 270 radial. Is that right?

[@mattgarrett5399]

No, ATC wants you on the 090º radial. Once intercepted you'll have a 270º track to the station. ;)

[@ksmith610]

I hope you're still reading comments from older videos! I understood this explanation well. It makes sense. My first reaction, however, was whether this method can be applied to flying a DME arc? I know you have a video on flying DME arcs, and I've watched it (but my old fart brain doesn't remember it all), but what would you say? DME arcs seem old-fashioned and needlessly complex with simple equipment. There must be something that automates them, right?

[@a.nasongo3152]

Awesome.

[@JustSayN2O]

Where are you Gian Luca? I hope all is well.

[@GianLucaNoia]

In Italy at the moment and all is quite well!

[@JustSayN2O]

Thank goodness! And thank you for replying.

[@nurjuma9316]

Thank you

[@KukosEQ]

I do not get it. On HSI you have selected radial 320, but on the map the red line represent radial about 160...why is that?

[@GianLucaNoia]

320 to = 140 from. i did not select the 320 Radial. I selected the 320 Bearing to the station. Use our +/- 2 trick for the reciprocal 320 -2 120 +2 140 refer to our other video for the answer: kzbin.info/www/bejne/p2O9e4N6bbFkeM0

[@valnuke]

the 0 is not perfectly aligned, this is why it looks like 160

[@alejandrogodoy7937]

⭐️ ⭐️ ⭐️ ⭐️ ⭐️

[@GianLucaNoia]

Well thank you Sir. Consider visiting passfaaexams.com/ for our full software and get all of our simple explanations!

[@TriNguyen-zf3pp]

Very nice

[@thusharikabotheju5655]

wow thanks so much

[@lonelysail906]

Thank a lot

[@the.pilott]

I confused myself even more after watching this