I don't understand why there wasn't a closeup of the tuning machines as he talked about the different methods... that would have been, well, useful.
@patrickhurley7072 жыл бұрын
Completely agree. That’s exactly what I thought.
@danabiondo92432 жыл бұрын
Same Here Lousy video.
@JewelWard Жыл бұрын
Ditto. The camera needed to be over the headstock as he showed the different methods of attaching the strings and then winding them. I couldn't follow his instructions.
@Ihateradiohead Жыл бұрын
yeah, not the best editing here. useless closeups, like watching pron that’s only bobbing man butt
@OllyJefferyMusic10 ай бұрын
I thought the same too... just checked the comments and I can see that it's not just me!! The camera came closer from the bottom and side of the guitar, but not a full on close up of the tuning pegs!!! Apart from that, I thought it was a useful video!!
@ATH_Berkshire3 жыл бұрын
The section on refitting the strings would be improved by a close up of the head stock.
@Tuberbev3 жыл бұрын
Love my J-45. Terrible visuals. This is video, please show folks exactly what you are doing close up. Thanks for making great guitars!
@rjrobertson14673 жыл бұрын
I wish you could have actually seen the three string winding methods.
@VERBANDTREM3 жыл бұрын
Love all the content! if you do other tech vids please focus the camera on the guitar rather than 3 different angles of Jim.
@chrisruef92213 жыл бұрын
Gibson, not to be Roger Ebert here but let me be Roger Ebert here. Those were bad camera angles on the low headstock shots while he was attempting to show us the wraps.
@JayYarbroughMusic3 жыл бұрын
Exactly. Very frustrating.
@silverloop133 жыл бұрын
@todd long I stopped the video there and went elsewhere. What an idiot camera man
@jordijb0073 жыл бұрын
Good video!, maybe a few close ups on the winding will help a little more and ... please, as you remove the pegs, place them in order because you may just want to use the same peg on the same string, if they are new is no problem but with the use each one will adapt to the lenght of the string, ...just saying ;)
@Harp_and_Guitar_Moving_Forward3 жыл бұрын
A hah
@janefossen83503 жыл бұрын
If you are going to do a video on string change, why not have a camera angle so we can see what you're talking about!! I use the Mike Hickey, Joe Bonamassa method.
@douglasbright1343 жыл бұрын
I would never use wire cutters to remove bridge pins from my j45
@ZeRealGlobox3 жыл бұрын
2020 Wrong Camera Angle Awards Nominee !
3 жыл бұрын
Still have the original factory installed strings on the new Gibson's I bought several years ago. Dove, Hummingbird, Southern Jumbo & Advanced Jumbo! Maybe I'll change them.
@chrisruef92213 жыл бұрын
Probably time
@Harp_and_Guitar_Moving_Forward3 жыл бұрын
He doesn't play
3 жыл бұрын
@@Harp_and_Guitar_Moving_Forward Hommie "Don't Play That" U know what I'm sayin'
@lexodetoo2 жыл бұрын
thanks howie mandel
@DylanGladstoneMusic3 жыл бұрын
The easiest way to get the bridge pins out is to just push the strings down a little way into the body after you cut them. As soon as the ball end is clear of the bottom of the pin, the pin should slide out easily, no tool required. Not only is it easier, there's also no risk of dinging the bridge with a pin pulling tool.
@charliewood7899 Жыл бұрын
Made sense but the intricate parts ie, the three methods need a close up so as it’s possible to see what he’s doing. This would be a perfect KZbin video for radio.
@dep10013 жыл бұрын
Are there really people buying a Gibson acoustic not knowing how to restring and tune it? Just curious. Thanks for an awesome channel, Gibson TV!
@smoggy19643 жыл бұрын
MySecretMachine do people have to have a Gibson to watch the channel
@dep10013 жыл бұрын
Hey @@smoggy1964 You're absolutely right. Beginners with cheaper guitars can of course also learn from this. But for some reason in this video Gibson owners came to mind :)
@dep10013 жыл бұрын
@@owenblake90 Haha I wouldn't call to restring and tune your guitar a repair :D :D
@SionynJones3 жыл бұрын
the snark tuner says the rubber of tuner interact with the finish it mention specifically gibson and nitrocellulose finishes. Oddly it also says the same for polyurethane finishes too. Im sure this is just for per-longed contact. Otherwise its a great tuner i bought one on jims recommendations.
@alexh31533 жыл бұрын
I feel like 3 at a time puts a lot of twisting tension on the neck. One at a time or all of them
@richardwhiteside32344 ай бұрын
WE CAN’T SEE THE NUANCE OF BENDING THE STRINGS!!!!!
@manu_sanz3 жыл бұрын
Showing how to change the strings without showing how to change the strings.
@swooshtx8 ай бұрын
Let's say we're going to show somebody how to do something and then make it very obscure to see. That ought to make for a great video 👍
@VictoryGuitarShop3 жыл бұрын
I learned about the locking method when I worked at Guild in the late 80's. Been using it ever since. I am curious about the Z method but cant see how you did it. Not sure why you have such a terrible camera angle, cant see any detail whatsoever.
@F.BERTOLOTO3 жыл бұрын
Violões Gibson são tops Abracos e bends
@FrisellFan012 жыл бұрын
The camera operator should have the camera focused on the head stock..as he is winding......
@revelry19693 жыл бұрын
Need a video from top as he shows different methods
@134SASAKI3 жыл бұрын
If your bridge pin is wood or plastic, *NEVER* pull it out with a tool especially cheapo string winder. They will chipped or deformed, and bridge may be dented. (Yes, I did lol) If you can't pull the bridge pin out, you can push it out from the inside of the guitar. Make sure the bridge pins and bridge holes fit properly (slightly loose fit). Also, his method would too much string wraps. Unless you want to earn a break angle on the strings, two or three wraps are good enough. The smart way to restring. Wrap twice and pass the tip of the strings between two wraps, the strings are virtually locked there. Many guitar luthier / repair guys use this method.
@celestevert6083 Жыл бұрын
My tuning pegs look like slinkies after this video. Thanks for commenting.
@micahf0 Жыл бұрын
Finally picking up new strings after, o god probably like 3 years
@95lovi2 жыл бұрын
Hmm the video is ok , only when listening there is no detailed focus on the threading and tightening. So I really don’t know what you mean
@maureenhogan40323 жыл бұрын
Close but no cigar ;-)
@BladeDoomer863 жыл бұрын
Cool idea Gibson, but dear lord change camera angles! You can't show precise string techniques from 6 feet away.....
@Seanmyers20003 жыл бұрын
Can you show how to setup a guitar
@nisssccc57433 жыл бұрын
Thank u soo much Gibson, I was really wanting to know how to put strings properly on my acoustic, but I couldn't understand all the other videos on KZbin but this one made me understand soo easily, Awesome explanation 🤘🤘✌️✌️ Thank you so much 😁😁
@vernonhoover13873 жыл бұрын
Beautiful flattop
@ijustinstephens13 ай бұрын
I can’t see how he restrings the guitar, because the strange, unhelpful camera angles seem to avoid getting too close to the guitar.
@coltonrobinsonworshipmusic11 ай бұрын
What strings are you using?? Bought an sj last year and can’t find anything that sounds like what it did out of the box…..
@tmcl7844Ай бұрын
What's the OEM strings on the 60s j-45?
@graemero55323 жыл бұрын
Cheers Gibson
@TheLambLive3 жыл бұрын
Thank goodness.. as much as I searched, I just couldn't find hundreds of other videos covering this exact topic... Thanks Gibson
@navydan5113 жыл бұрын
I understand that being an experienced Luthier you have a number of tried and true short cuts. I enjoy these Gibson Video's, I watch them all.. I have been restringing my guitars all brands including Gibson Acoustic and Electric's since 1966, But suggesting to use a pair of Wire cutters as a Bridge Pin Remover is just not a great Idea for a short cut and made me cringe. Imagine a new owner changing his or hers strings for the first time using a pair of wire cutters as suggested and damaging the Bridge or Nicking the Bridge Pin? It would minor, but a big nick on the Bridge would suck every time the guitar was played. Investing on a Plastic Bridge Pin remover for a $1.00 or $2.00 is well worth having in your tool box after spending thousands on a great brand guitar. good or bad my opinion, Jim DeCola does have the Dream job..!!
@lorenzomaximo18182 жыл бұрын
Yes bad camera angles I can’t see what you’re doing.
@devjanidatta45483 жыл бұрын
After chaging string I'm facing problem to tuna my G string its so tight I can't take it beyod D, if I apply much stress my string broke but doesn't going to G standard tuning.What should I do?
@HatRock3 жыл бұрын
This video has to be redone. One can’t see a shit.
@sheilabequette32993 жыл бұрын
I know this video is about restringing a guitar but I need some direction on where to get a new pick guard for a 1960 Gibson Hummingbird. Is there direction you could point me in to obtain one? Thanks
@grantwiscour2 жыл бұрын
You have to get your authorized Gibson luthier to order and put it on for you.
@billyb6116 Жыл бұрын
Nice video but terrible camera work when inserting, bending and winding the strings. I guess people who do this all the time forget rookies need to see what the they are talking about.
@user-my2nj3jz4p3 жыл бұрын
I am glad to know the correct method of changing strings. I am definitely looking forward to the next programme.
@KaLMichaeL8 ай бұрын
The whole purpose of this is detail right? How and why is not shown or told.
@alanwilliams90217 ай бұрын
cheers guys, but your camera work is shocking
@kennethholbrecht61033 жыл бұрын
This guy went from trying to explane gforce tuning and dip switches to showing how to do it oldskool .
@geofftate61133 жыл бұрын
Ditto the crap camera angle!!!!
@Nikoo0333 жыл бұрын
Or you can push the bridge pin from underneath the bridge via the guitar hole. Safer compared to cutting/damaging the pin or the body of the guitar 🙈
@Junior13853 жыл бұрын
What i do if the bridge ping get Stuck? because that happened to me when i was stringing my acoustic guitar and i try to get out the pin, its was hard because it was stuck.
@DylanGladstoneMusic3 жыл бұрын
Try pushing the string slightly into the body. This should move the ball end past the end of the bridge pin. The pin should slide out easily after that. Since I saw someone do that trick I've never used a bridge pin pulling tool.
@Junior13853 жыл бұрын
@@DylanGladstoneMusic oh, thanks
3 жыл бұрын
Why have a OVERDRIVE distorted electric guitar intro? Shouldn't be am acoustic sound intro? Why not RAP, Classical or Hillbilly Bluegrass music intro's?
@glentilley8912 Жыл бұрын
I own and play two beautiful Gibson guitars but this video lacks the professional camera and instructional expertise I expect from Gibson. B minus
@danabiondo92432 жыл бұрын
Thank you. However your Not filming so we can See the head stock.
@lisaann70492 жыл бұрын
She liked the stretching part...
@GuitarFuel3 жыл бұрын
Love all this videos !!!🤟🤟
@jacobchiasson93613 жыл бұрын
When is the icon Kirk Hammett is gonna come out
@mars64333 жыл бұрын
Anyone else waiting for him to poke a finger ???
@Roosterscoope3 жыл бұрын
😂
@Roosterscoope3 жыл бұрын
I cringed when he took the pins out with the wire cutters I know that much 😂
@ericf28615 ай бұрын
Don’t waste your time, they show you multiple ways to tie off strings but the director didn’t think it would be advantageous to show a video of it, it’s all obscured. Absolute waste of time, back to search.
@3li4723 жыл бұрын
Alright, I've had enough. You guys have to make an Eric Clapton signature fool SG
@3li4723 жыл бұрын
You'd make a killing and I really want to see and buy a professionally produced fool sg
@klauscottonswab23222 жыл бұрын
That was not a proud 'arms over each other'! You can do better! Embrace that Masculinity! 💪💪💪 They've destroyed enough already! 😲
@fastm39802 жыл бұрын
Poor video recording. 🤣🤣🤣🤣 You can't even see what he is doing