Struggling To Run Streets? This Might Be Why!

[@Gigabeef]

************UPDATED VERSION HERE: kzbin.info/www/bejne/kIHPdJlumpWjb8k IMPORTANT CHANGES TO SETTINGS IN THAT VIDEO*****************

[@freshdachs6200]

You explained every graphics setting better than 90% of 'visula overhaul' guides!

[@Gigabeef]

Thanks.. I was in turmoil about this video because it's so hard to test and know what works, even on just one system nevermind everyone else's. But hopefully there's something in there for everyone to try or at least learn about!

[@freshdachs6200]

@@Gigabeef With the info you gave us in this video it became way easier to trial and error our own graphics settings. Now I know which setting does what and which settings are most likely to have an effect on fps.

[@mick_thundus]

A good portion of why this video is so useful is because you’ve very concisely explained each element with visual demonstrations. Now not only can I copy your well researched settings, should I choose I have the knowledge on how to modify them to best fit my needs. Well done as always

[@Gigabeef]

Thanks guys :) means a lot actually!

[@Canadien1860]

I had my settings for quite a while now but I always had the feeling "it's not optimal yet". I'm definitely looking over my settings again now with the new gained info from your video! :) Thanks @Gigabeef! 🙂👍

[@GreenSinic]

Probably the best Tarkov performance video I've seen in years, especially due to your consideration for the game's atmosphere and fidelity.

[@Gigabeef]

Hey thanks!

[@brianlewis6470]

Something interesting is that SSR set to any quality will also brighten up foliage, and make spotting inside of them easier. Definitely use it if you can spare the slight fps cost.

[@Gigabeef]

5800x3D CPU video here: kzbin.info/www/bejne/jnSUkp2Hfrlrg5o

[@TGC1775]

Even Nikita said it needs RAM, so try 32GB if you can budget it, to anyone that finds this.

[@genuwhine6782]

90 frames? But tarbob reddit said x3d best chip lul

[@xhale018]

it is? what's your point here?@@genuwhine6782

[@alespic]

It’s always a pleasure go listen to GigaBeef. Videos are extremely informative, straight to the point, and idk what’s with his voice but I just find it really soothing. Thanks for the years of high quality tarkov content, keep it up man.

[@Gigabeef]

Thanks so much!

[@CmdrFlemming]

I really love your dedication towards making very well explained EFT videos - TY mate

[@ainumahtar]

Amazing video, very clear and comprehensive, thank you so much!

[@tobiasweber5637]

thx for this video man ! couldn´t even run maps like lighthouse cos my pc is a bit outdated. the tutorial helped a lot and now I can play all maps.

[@chillspotmusicgroup]

gigabeef, your explanation videos are truly something else. You are easy to follow, listen to and overall you just provide a nice listening and viewing experience. Thank you.

[@Gigabeef]

Thanks! Appreciate ya :)

[@oshel5793]

Not only were your tips insanely good, and way better then almost all of the cookie cutter settings videos I've watched. But it was even better because I have the same exact cpu and gpu as you. You've finally made the game run for me like how people say it's supposed to with my specs. Thank you so much, another great video as always. 🍻

[@general_dude8025]

Oh my god this is what I’ve been needing lol, thank you so much

[@Trev0413]

Great job GB! The new reference vid for Tarkov performance, great stuff friend.

[@GS-el8ll]

thanks for the up to date info mate, trying to set up a fresh install has been a pain

[@slsutton4]

Great and informative content, thank you!

[@maddie-o]

you struggle because of PC issues I struggle because I am terrible at the game we are not the same

[@simonjernigan7957]

Fantastic video man. Subscriber gained.

[@BuckScrotumn]

Has anyone confirmed that upgrading to 32 gigs of ram helps? On streets my 16 gigs are usually around 91% utilization and runs horribly while the other maps hover around 60% and run beautifully.

[@andrewz2854]

Absolutely helped me. Before upgrading my RAM I literally couldn’t play Streets. It’d just crash at 100% every time. Now it actually runs decently, still laggier than other maps though.

[@etch883]

Awesome video, thx ! 🙏

[@PaulSebastianM]

MIP Streaming can introduce stutters. Automatic RAM cleaner makes the game request more memory than it needs so the OS can try to swap out other processes from RAM into disk, so Tarkov can get more RAM. I don't know what bad side-effects this can have but it's probably system stability. Lowering FOV can have the biggest improvement sometimes, because less are rendered at once, so this helps when your GPU can't keep up. It doesn't affect the amount of VRAM allocated as textures and such are already loaded.

[@tommysshinebox1661]

Thanks! This made a big difference on my 4070! 👍☺️☺️

[@Gigabeef]

Hey thanks so much!

[@aimized1460]

your game runs amazing man, reminds me of how this game runs on every single map like this but not on streets, very sad but i quit playing it until its actually playable. very nice video lad thanks for trying, its the though that counts !

[@Pixin30]

Tarkov even managed to fill my 3060's 12 GB of VRAM, so lowering the texture quality gave an instant ~40% frame boost on streets offline

[@cars10mobile]

Thank very much you! Very helpful. Please keep updating when eventually unity 21 lands.

[@damodongo]

Explained everything spot on best video I have seen on tarkov graphics settings by far

[@Gigabeef]

Thanks! Each system is different but the idea was to help people tailor it to their needs. I have to do some other things differently due to streaming as well, Tarkov is a very sensitive game haha

[@isaacteal6628]

Your explanation was really nice. I seem to have a big issue on Tarkov where my CPU utilization is around 40% however my GPU utilization is around 30-38%. For reference I currently use a 3060 ti paired with a Ryzen 5800x. From when I ran some tests it seems that nothing is being bottlenecked. I've never had this issue on any other game than EFT. I took your advice and took a look at my vRAM and noticed it is capped at 8gb and aboout 7.6-7.8gb is used when in raid. Any ideas?

[@marcopappalardo92]

Hello Gig, thanks for the video! I have 5800x3d and 6700xt but lately no matter what I try on settings I start the raids in Streets with 120fps and after 5 min game it stabilize around 55/60. I think there is something i could do but idk what. Do you have any clue on this behavior? Thanks again! Keep up with the good work!

[@Wilco23]

@Gigabeef, your settings are solid for sure! Unfortunately, with MIP streaming on, Tarkov becomes unresponsive when I extract or die needing to alt+F4 the game in order to get back to my stash. Missing the after raid report entirely.

[@cetanwhitehat9117]

Sometimes, with MIP streaming you will get a black screen for around 30 seconds after a raid ends, and if you wait you will load into your stash fine. I disabled it because I was tired of the bug, but it doesn't affect everyone and your game is not unresponsive it is just a weird loading bug. Unless your tarkov is actually unresponsive after 30 seconds or longer then I am not sure what is going on lol.

[@dylanlahman5967]

Oh my god, thank you so much Gigabeef. If I ever run into you IRL I'm buying you a beer

[@Gigabeef]

Haha thanks!

[@ozzy9184]

I know the vid is a bit older now but I have recently come back to the game and when i found out what the Mip streaming feature did i turned it on and it has greatly improved my fps. The only problem i am finding with it and i know a couple other people too are suffering from this too is that >in raid< the items that arent on my own pmc that are in bodys, containers, etc will not load their images and instead just have the infinate loading circle till i either inspect them or transfer them to my own invent. Was wondering if youve heard/seen this problem and know of a fix?

[@gaxit]

A really good video thanks!

[@mrchillgreen]

@Gigabeef on windows 11 its not enough to check disable fullscreen optimisations you also need to change "high dpi settings" a new window will open check the bottom checkmark there and override and set it to application the best way to verify if it actualy works is if youre ingame and you change your windows volume with your keyboard (or with mouse bindings if you do not have a volume adjust on your keyboard) you should NOT be able to see the windows volume bar anyhwere on your screen if you can see it then you did not disable fullscreen optimisations this does not work in directx 12 games tho.

[@el1f0]

I like to use MSI afterburner + RTss that's built in to monitor in some cases it helps you show evektual bottlenecks. It's really easy to see especially if RAM or VRAM are an issue, and if GPU isn't 100% it's likely CPU bottleneck

[@TheArkBoi]

just to point out something as far as CPU goes, the reason you can see low utilization % and still be CPU bottlenecked or limited is because tarkov probably isn't using all your cores. It's rare to see a game use more then about 4-6 cores on the CPU on even the most demanding games. However core count usage is not the only limit to your cpu performance. This is where the clock speed AKA the GHZ part of the cpu matters, basically the higher the clock speed the faster the individual cpu cores can process information. Think of this like running water through a pipe. Too small of a pipe (AKA not enough cores like a dual core or even most quad core CPUs) and the water is limited because of restriction in the flow, Too big of a pipe (aka a cpu with like 8 or more cores) and you wont have flow restriction, but realistically it wont use up the whole pipe it'll just be like a river flowing leaving the pipe half full. The GHZ or clock speed on the other hand is equated to how fast the water is flowing to begin with. Even in a smaller pipe a faster flow will increase pressure and allow you to basically force more water through the pipe albeit at a lesser efficiency due to the resistance basically capping you at a certain flow no matter how fast you push it. However lets say you have a big pipe AKA more cores, in this case you can basically increase the flow infinitely and it will go as fast as the water wants to go as there is no restriction in the flow based on the pipes size. TLDR basically a cpu with 16 cores will actually probably perform worse than say an 8 core CPU if the 8 Core CPU has a faster clock speed because Tarkov is not actually using the extra 8 cores that you get with the higher end CPU. That being said usually a CPU with more cores will come with higher clock speeds. It is however something to keep in mind if you are looking to upgrade your cpu. Task manager isn't the best at telling the full story basically so the utilization % is not a good metric of performance in game.

[@SciGuy_]

Great video Giga! I was always afraid of Mip Streaming until now

[@Gigabeef]

It causes some problems it seems with loading for some systems, but it's worth a shot

[@SciGuy_]

@@Gigabeef yeah, I tried it but my PC did NOT like it haha. I did adjust my PostFx a bit and the game looks much better

[@SALTINBANK]

One note DLSS has side effect too it will lower your vram because you are runnning in Quality mode (66% of your native resolution 1440P)

[@Tarkonomist]

testing this between the guide on reddit we'll see. I have very similair specs to you except I have a 3070 ti so well see I really appreciate this video :D

[@Gigabeef]

which reddit guide are you referring to?

[@nivonis393]

I've tested "only use physical cores" when they said they fixed it. I had been using process lasso. I turned the settings in process lasso off. And turned the setting on in EFT. I referred back to process lasso to see EFT was only using the physical cores, and it was, through multiple raids. At least for me it does work. I still use process lasso anyway tho . It's greats program Lots of other reasons

[@lorrewatkins5925]

Yea I use 370Ti in my rigg which I'm satisfied with. Great vid by the way, alot of good points !

[@jehree9850]

The automatic RAM cleaner setting only cleans your RAM when you press escape when you are in raid.

One of the best videos for explaining Tarkov's graphics settings, especially the mention of mip streaming for low video RAM situations. A couple of things worth mentioning though: 1) I'm not sure about this, because the game actually doesn't grey out texture quality when mip streaming is enabled, but I believe mip streaming overrides texture quality. It will load the highest resolution textures for close stuff if it can, but otherwise will use lowest quality textures, even if texture quality is set to high. 2) The two additional mip streaming settings as you mentioned makes it so that the game streams in high resolution textures faster. It's worth trying them at their highest setting and reducing them as needed, like with already high system RAM usage, or outdated SSDs. 3) The use only physical CPU cores setting is largely unimportant. Windows usually does its job well and runs games on physical cores anyways. It's kind of a compatibility setting for when this doesn't work correctly, which can be the case for newly released CPUs. It's worth trying, but I would keep it off if it doesn't improve performance. Even if it does, it's quite possible the advantage will go away as system software is updated over time. 4) Regarding the difference between offline and online raids, the main reason for the FPS difference are the number of AI. If you play offline without AI, on most hardware configurations you'll be GPU limited. If you add AI however, you can become much more CPU limited than online as they keep spawning in, because less AI will be killed. Still, even with a 5800x3D, online you are most often bottlenecked by your CPU (still mainly due to AI), unless you are playing in 4k with 2x supersampling enabled that kills your GPU. 5) Disabling anisotropic filtering may provide a small competitive advantage, because more blurry textures mean less detail for your enemies to be lost in. Still, the difference is minor in this regard, especially because complexity in geometry still provide ample concealment.

[@Gigabeef]

With MSI Afterburner there is a difference using each texture model vs when using MIP streaming - eg 5.5GB on low but 6.8GB low+Mip. I think you get some higher quality textures when using MIP that you wouldn't when using low on its own, but I'm probably going to do some more testing and check.

@@Gigabeef For sure you get higher resolution textures near you with mip streaming when texture quality is set to low. What I'm not sure about is whether when using it together with high texture quality, the latter raises the minimum texture detail to high. It seemed to me in the past that it doesn't, meaning that the texture quality setting is essentially ignored with mip streaming.

[@Gigabeef]

Hmm you have a different RAM + VRAM usage at each level of textures with mip streaming on/off which indicates to me that it isn't ignored completely, but I'm not 100% sure WHAT it is exactly doing 😅

[@weiixia201]

Thanks for the video! I would like to ask, what is the NVIDIA Reflex Low Latency? I have it on "on + boost" and I seem to be getting some FPS out of it

[@blackm4niac]

That is the input lag reduction option for NVIDIA GPUs. Basically means when you click your mouse the game registers you doing that a tad bit faster which gives you an obvious advantage in fights as you can basically shoot first, ideally.

[@Gigabeef]

What blackm4niac said. I have it "on" because it uses less power than boost which I don't think is really necessary most of the time

[@derwaldarbeiter1607]

I had 16 GB RAM and whenever I loaded into streets I got kicked out of the game. The support gave me a guide on how to use my ssd to get more performance. That and the low prices on DDR4 were the reason I upgraded on 32 GB. Still… it shouldn’t be a necessity to have more than 16 Gb RAM just for being able to play one map.

[@vtk.pyr0]

With mip streaming this issue gets completely solved, but end of raid screens takes from 1/2 to 5 minutes to appear, sometimes it crashes and you can't see who killed you, why and the healing screen that bothered me a lot. I think assigning the mip adjustments such as memory and usage to max solves that issue. But without it I can't load to streets or lighthouse without a blue screen

[@t3hSurge]

I fixed this by simply going from high to medium textures.

[@StaffRecordPlayer]

Absolutely great video. Unfortunately DLSS doesnt do anything for me on Streets, I hover around 40 dps whatever I try. Well, will see what the next patch brings..

[@anzi4419]

What about Nvidia Reflex low latency? I found having it on means little tear on screen, while off and vsync on makes game looks smoother

[@simnutracing]

I'll take the laser tracing with DLSS now that the scopes are fixed. No flickering and noticeably higher frames for 3060ti. Thanks for the vid, didnt think much of VRam being the problem.

[@BautistLOD]

same man i got 3060ti and turning textures to low fixed everything, i was blaming my poor 5800x3d while i should have been blaming fucking nvdia and their 8gb vram

[@Kieral100]

3:50 I have AMD Ryzen 7 PRO 3700 and "only physical cores" kills my FPS. It drops by 10-15 frames and adds some freezes. My guess its performance depends on CPU type or some advanced CPU settings

[@matthewcawley3107]

the game seems to be more optimized in the gpu department, i run the game on mostly max settingS and only use about 25-40% of my gpu while using 100% of my cpu. But i do have a mean bottle neck so that probably isnt helping

[@graemepennell]

Ok, i have a Rtx 3060, 12Gb YET on the fps 2/3 i cant recall, it only shows its using 3gb. if this is teh case i would be aswell go back to using my ATI R9 280. (This was posted as soon as beef stated the "VRAM" on the screen, Just had to get it out there). The rest of the pc, was an upgrade from a MSI z87 g45, 4770K, 32gb 2666 & the ATI saphirre R9 280 (this was in xfire as when i got the system i got 2) New spec - MSI B550 A pro, Ryzen 5600x not OC, 32gb corsair 3200, Zotac rtx 3060 12gb.

[@tailfirst]

Instead of ingame postfx I use reshade - with smaa, adaptive sharpen and technicolor 2 enabled and EFT is spectacular.

[@landonmandt4687]

Great vid

[@Teachy69]

The Loading map and loading loot is very slow for me any fix you know?

[@Executioner59]

Really wish i could take advantage of this mip streaming option on streets but for some reason im able to run all the way up to the object and touch it before it switches to the higher res version, even with lod quality on 3.5,3 or 4

[@Gigabeef]

This does happen unfortunately on Streets with mip streaming

[@IceBear702]

Finally someone who actually explains this well thank you.

[@johni85i63]

Adjust size and position set your scaling mode to integer scaling and it will replace Image scaling with image sharpening in control panel and I prefer to use that over tarkov's sharpening

[@BautistLOD]

does it look better?

[@johni85i63]

@@BautistLOD Personal preference The best way I can explain it is its reverse sharpness black instead of white its not as distracting

[@achieflint1899]

sine the last patch ive not been able to load a raid once loading map starts up im dc or frozen

[@jamesward2141]

I have the same hardware as you, but run everything on high, DLSS quality on 1440p ultra wide and get 100fps on most maps and 70+ on streets and light house?

[@HPAddict]

Auromatic ram cleaner made my fps drop to 28 constantly from 120 on factory. Never had it before I had it turned off. Had to restart the game to fix it.

[@xzeuii]

Another thing I’ve noticed is that Streets tends to have memory leaks that persist between raids AND maps. Went from running Streets all day to customs, just for it to run at 30 FPS with the occasional 90FPS smoothness

[@nick9115]

that's a bug that came recently, it's not because of streets

[@bigcheeseroll284]

@@nick9115 memory leaks being an issue "recently" lol glad I dropped this game a while ago

[@jermu8706]

how new are you? this game has multiple memory leak bugs every wipe@@nick9115

[@TJ-dn4zc]

Great video

[@Simonov633]

Very good Video.

[@denisvarga2794]

couple days ago i was running streets with my friends, i had about 20-30fps consistently. told them that i will never run streets again. then i decided to boot offline mode, with only scav bots. and on the SAME settings i get consistent 70fps...

[@BautistLOD]

i have same specs you have fixed my fps ,I Had no clue about textures and vram being a problem , thanks

[@army2207]

Also as of now theres a huge memory leak. So if you start up tark and get on streets and its 60 to 70 fps but after a few raids its around 20 to 30 you need to restart the game

[@Niblik]

What should my nvidia reflex setting be on?

[@pagannova3621]

i think one or two settings made my Streets worse, but, that was turning on DLSS 2.2 i think. i'll go back to it off. (scope double rendering was slowing it down after turning it on, was weird) thanks, interesting info. will keep messing around with settings on a non-3D Ryzen and Radeon 7900 XT card

[@CallMeSnake89]

Dlss is Nvidia based I believe that may be your issue

[@JAH1736]

the only thing that allows me to run streets decent is DLSS balanced or quality. Even then inside buildings 60 and below fps. running outside 90-100. I love streets but its so inconsistent. 3080 32g ram. So what lvl MiP streaming do you use? lowest?

[@Gigabeef]

Yup lowest, I used to run highest but it seems to make little difference so I'd rather put less strain on the system I guess

[@homeless0alien]

Running a system with 64GB of DDR4 I get about 10-15 less FPS if I turn on the RAM cleaner. So it can have a real negative impact. Also, any reason you skipped Nvidia Reflex Low Latency? I have it 'on + boost' but you have it only set to 'on' and im curious if there is much difference?

[@Gigabeef]

Ah I cut a small piece out of the video so it got lost - I don't think it makes any difference except boost can draw more power unnecessarily so I have read. But I think the difference in both performance and power is minimal ingame tbh

[@squidwardo7074]

reflex is just lower latency, does nothing to help fps. I've seen some vids about it and it does basically nothing, maybe it helps in other games idk

[@karnaki44]

meanwhile my 3GB vram 1050 💀💀💀💀💀

[@CoffeeFresh_]

I hope you have a chance to upgrade soon. Gpu prices are dropping making it "easier" to get a decent card.

[@ocelotkillalot4632]

Yo gigabro, I have a question. So mip streaming gives me no benefit in fps. I have 5800x3d, 2070 super and 32gig ram. Do you think dlss is enough?

[@Gigabeef]

One thing to bear in mind is MIP on low actually makes close textures look better though, which is a bit counterintuitive. But just "low" means all textures are low, whereas on MIP stuff right in your face gets upgraded for a small VRAM increase. I tested it exactly after the video actually and found: STREETS: offline no bots 1440p LOW: VRAM: 5,438 RAM: 18,855 LOW & MIP: VRAM: 6,800 RAM: 20,400

[@user-ef4lr7to5m]

Guys, no joke. Bought my 4080, 13900k, 32gb 6400mhz CL36 recently and now have stable FPS 144 on streets! Heavily recommend, easiest FPS boost!

[@maskofthefather3138]

in offline mode

[@hazzatown]

In online mode?

[@Mildi3]

Im running 32gb ram and rtx 2070 super, this could help alot, gotta try changing up settings. thx!

[@cameronlamb1869]

Nice one bro

[@biohazard408]

I actually felt educated. 10/10

[@benefvctr]

I have a 3090, 7950x3d, and 64gb of DDR5 6000 and this map still runs terrible in 1440p. I checked my task manager trying to figure out why, but nothing was near to maxed out. 😞

[@Ixaglet]

RX 580 8GB, 16GB of RAM, I get 45-60fps on streets, mostly 60fps. I play on lowest settings, but 1080p. I didn't have mip streaming turned on

[@00TomFoolery00]

Bravo!

[@9NitrogeniuM6]

Hey GigaBeef ! Could you do a performance Update video once Patch 14.0 comes out ? ^^ maybe prepare some Before Scenes to Test the same Scenarios on the new unity update !. love your videos and Keep up the good work ! :Edit: Could you please Include the Scope Performance as well ? ^^

[@Gigabeef]

Good idea, I need to do more work on consistent testing because its actually really tough lol. Need to think about the methodology more before doing another :)

[@9NitrogeniuM6]

@@Gigabeef 💖 we can also observe the Ram/Vram consumption

[@Aingz1]

@@Gigabeef Offline no bots is defintly the best way to test FPS, i.e; if 1 settings gives more FPS than other on the same fps without bots, then its better. Maybe you could do a 30 seconds run on a specific path on streets that has dfferentes views and stuff to have an ''exact'' benchmark.

[@nabudis123]

I used a vega 64 8gb with hbcc to make my system think the card had 64gb of VRAM(on a 256gb system). Streets pulled 22gb of vram and used 38gb of total system ram with lowest settings and high textures.

[@Wilco23]

@gigabeef what about your nvidia control panel settings?

[@Gigabeef]

i.imgur.com/6dUi1qu.png

[@ryandoyne6679]

I was able to run streets fine last wipe .. started messing with my settings and keep getting booted. Anyone have any tips for AMD / adrenaline?

[@petrjahoda1869]

Hmmm ... I wonder how much VRAM do you need for 4k High ... I have 3080 (10GB) and I was thinking I needed better CPU and RAM (I have i7 9th gen + 32GB DDR4) .... I guess I need to go streets to test my VRAM Well ... 10/10 GB used .... so yeah ... and my CPU is 100% too :D .... I guess my PC is weak -_- (and its not even true 4k but DLSS quality 4k ..)

[@FutureLaugh]

on windows 11 if i alt tab out, the game runs the risk of crashing to the point i have to force a restart. never had that problem on windows 10

[@Morph1ne1076]

small tip about the automatic RAM cleaner for 16GB ram players like me: Don’t always have the option on, but instead what you do is: after a raid starts, open your settings first and enable the automatic RAM cleaner, you should see your game freeze for a short second, then it means it worked. Disable the option again and you should be good to go. You should see a noticeable decrease in RAM usage in your task manager. I usually do this once per raid on larger maps and for maps like factory and labs I do it once every two raids.

[@genuwhine6782]

Small tip about the cleaner it doesnt actually do anything because a cache cleaner legit isnt a thing lol

[@Morph1ne1076]

@@genuwhine6782 yea but it does reduces RAM usage temporarily.

[@theb4dwolf]

I was wondering why my GTX 1060 woke me up today to watch Gigabeef's new video... 😅

[@Era2Sunrise]

Would you mind sharing your nvidia control panel settings as well?

[@Gigabeef]

Sure i.imgur.com/dQI1tjj.png

[@EvanzoZubinsky]

Same goes for the lighthouse, it stuttered bad on my 3080 10gb, I had to switch to low textures to get rid of stutters, I mean come on, 3080, lowest textures, seriously?

[@airtime4423]

The glass corridor box fazes out for me, and I can actually shoot through it idk wtf

[@sonuabc6573]

My laptop gives like 55 - 65 at all settings . If I lower down settings then cpu , GPU usage goes down . My GPU has 12gb vram

[@bovinejoni2238]

i have i7 12700kf, 32gb 3600mhz ddr4 ram, and a gtx3080 with 10gb VRAM and only get 40 frames on streets. ive tried everything in your video and others but cannot achieve playable frames on streets

[@CoffeeTheCaffeinator]

I have a 3070 and i7-9700k, 32gb ram. I know my CPU is bottlenecking me but holy shit, same resolution and same settings as you without post effects and I'm getting 45-60 on offline streets.

[@animtok]

For me it was pretty straight forward, I have RTX3060 12Gb, Ryzen 5 3600, 32gbram 3200Mhz and i noticed that dlss/resolution change does nothing to my fps so defiantly a CPU bottle neck

[@HellGatefr2]

5800X3D

[@ayzo5264]

mate, my pc bluescreens when i startup streets. it bluescreens in the loading screen 😭😭.

[@mac893]

Also another thing to consider if you go to your display settings on your monitor and go to "advanced scaling options" under display settings, alot of newer monitors 2k and up have the it set from anywhere to 0-500, set it to 100 and see if you get any changes.

[@Dyils]

You keep saying "this doesn't seem to impact fps" but have you made sure your GPU is maxed out first? A setting might not make a difference because you have plenty of GPU to spare so enabling it doesn't max it out. But if your GPU is already maxed out, that setting could suddenly start impacting your FPS when you enable it cause you don't have GPU performance to spare for it. Advice will differ for users with a GPU bottleneck vs users with a CPU bottleneck. For example, on the MIP streaming one, this puts more load on your CPU and disk drive. So only recommended for GPU/VRAM bottlenecked systems. CPU bottlenecked systems should keep this off at all times. Also, for the sharpening, the one from the "Graphics" tab rather than Adaptive Sharpening seems to not stack with the painkiller sharpening effect. So I find that using the sharpening from the "Graphics" tab at around ~2.2 almost matches the painkiller effect and then when I take painkillers, I experience absolutely no difference cause I already have that much sharpness on and they don't seem to stack. Not so with the sharpening from the PostFX, which seems to stack on top of the sharpening from the painkillers and it makes things look absolutely awful and oversharpened when both are active.... unless this is what you were referring to when you mentioned the the bug around sharpness at 0?

[@inreisen]

So what should we do?(as a person who has a CPU Bottleneck, I have RTX 3080, 32 Gb 3200Mhz DDR4 Ram and i9-9900k, I use DLDSR to upscale my resolution from 1080p to 2k with DLSS, all of my in-game settings are maxed out(expect shadows, Object LOD Quality, Overall Visibility and other stuff like mip streaming, high quality color etc.). But still, my performance is not good on Streets.

[@MrJB31]

Do you adjust Nvidia control panel settings? Video needed if so please.

[@Gigabeef]

Not much... what I use is here, I tested a few things but it didn't change much for me i.imgur.com/ljjPMQJ.png

[@blax140]

must be nice being able to play the map i load in and get like 5 frames

[@Sparkyjdog]

I came across this just after doing all my own testing, and this is consistent with my findings. My streets became playable after changing textures from high to medium on a 10gb 3080. high was redlining my VRAM.

[@johni85i63]

Also you can see laser beams clearly with dlss and are almost invisible with taa

[@SewerOverlord]

what's funny is I basically have half of your specs ( like literally cut down the middle in terms of vram, ram, procession power,) And I run tarkov on high settings, never get a hitch