Gilera runner 180 build vid 3

Well, FINALLY got all the parts back, after the piston destroyed itself. Im really happy to hear it running again. I did the following
New cylinder/piston/rings/nikasil plating
PM tuning center fire dome
Pm cooling cap
Malossi delta clutch springs
Malossi CDI
New bendix
Now time to put in some fresh fuel and work on tuning! Also, we have been buying cars at the local auctions, as we're dealers, and decided to have some fun with a couple cheap ones out here on the logging roads. Nothing but fun, and work of course. Thanks for watching, and always support your favorite USA shop, right here in portland oregon
Support your USA shops!
HTTPS://WWW.SCOOTERSWAPSHOP.COM
HTTPS://WWW.SCOOTERPARTSHOP.COM
P# 503-719-4886
PLEASE LIKE SHARE AND SUBSCRIBE! Make sure to click notifications to keep up to date on the latest and greatest happenings. ALL parts come from our shop in Portland, Oregon!
Thank you for your support!
HTTPS://WWW.SCOOTERSWAPSHOP.COM
HTTPS://WWW.SCOOTERPARTSHOP.COM

[@Nonnenmacher87]

Finally, someone with not a Zip ;) Your Gillera is great.

[@JohnDoe-iw5jg]

Just asking What’s wrong with a zip?

[@snox3616]

@@JohnDoe-iw5jg Yeah was thinking the same lol

[@Barbarossa010]

Same i have a zip SP 98 with 180engine swap💪💪 much faster wheelie monster

[@Scooterswapshop]

thanks

[@ayasir1956]

Hello from Malaysia mate. Here we got it brand new, it was first sold back during Dec 2009 / Jan 2001. There's well over 100 units still on the road here. Some of 'em are making over 30 on wheel HP with the stock Gilardoni blocks, but with oversized pistons and 55mm crankshaft. We've tested the PM59 and PD Hornet ( stainless steel version ), the PM pipe works superbly, the PD Hornet needs more power ( perhaps a 200cc block ) to make it perform. The worst part is rear tire choices as 130/60/13 choices is so limited. Back during 2001 - 2002 I rode my SP180 ( the one with the rolling nut on the CVT cover ) at SIC ( Sepang International Circuit ) and the best tire I'd say is the Pirelli Evo 21 / Evo 22 combo. The Malossi CDi only works when the setup is still screaming even when at over 10k RPM.

[@Scooterswapshop]

Great info! I need to get the cvt tuned it’s pretty boggy with the delta and mhr red springs

[@ayasir1956]

bogged down during launch?

[@riccodegraaf8503]

I made one malossi 172cc aircooling block with pd hornet and push it to 33hp without fine tuning and 52mm crankshaft

[@riccodegraaf8503]

Check it on my instagram : @T.T.performance

[@BROKERICHGUYog]

Love this scoot.

[@Scooterswapshop]

its fun

[@ItsTheKeji]

Such a wicked bike this. 👍🏾👍🏾😎

[@Scooterswapshop]

Wiked smart

[@DaleMcKenna]

Love your vids! Keep on doing what you guys do

[@Scooterswapshop]

thanks dale we appreciate it!

[@bobymarleybe1400]

verry nice part big up my friends from bleguim i love the 172cc

[@Scooterswapshop]

awesome

[@backyardmec2348]

Your shop looks legit I'd love to start one just like it !!

[@Scooterswapshop]

thanks

[@XxProJ3ct3dSoulXx]

Best two stroke scooter together with the typhoon 125cc air cooled 2t best 2 strokes ever made.

[@DontKnowHowToTypeIn2]

i have a typhoon, it's completely stock. what should i do for some light hp mods?

[@XxProJ3ct3dSoulXx]

@@DontKnowHowToTypeIn2 variator and exhaust make sure it is street and not sport or race parts

[@SuperFLOSMAN]

I agree ive owned 3 125 180

[@Scooterswapshop]

1 of the best

[@nikfurlan2518]

Make more videos like this. I love to see more runner 172 videos😍

[@Scooterswapshop]

we don't sell parts for the runner so we don't do much with them

[@nemzdroidx]

Lucky to get that 180 I had a Yamaha aerox here in the States got it from a guy stationed in Italy sold it to someone in Michigan regret selling it.

[@Scooterswapshop]

thanks

[@lafrizzograppa]

my first runner was a 170cc brought to 180cc effective, whit jolly motor exhaust , 38 dell'orto; ok now my runner is 250cc 4 stroke 30cv :)

[@Scooterswapshop]

cool man!

[@liquidpotato2527]

Try to get your hands on a sp pro seat, its amazingly soft, u’ll love it

[@Scooterswapshop]

That would be nice!

[@shoominati23]

I adapted a cargo net (fastened with large washers) into one of the seat bottoms I cut out so I could still plonk my helmet under my seat without worrying about it falling out or resting on the carby or tyre

[@Scooterswapshop]

nice

[@stevenmullins3496]

You should do a video on a 2009 Honda metropolitan 50cc scooter !

[@Scooterswapshop]

we may

[@alessandropezzella4891]

Wow

[@Scooterswapshop]

Wowsers

[@shoominati23]

Man you should try loctite 5800 or Wurth Green , those are the best flange sealants in my experience, and only take about an hour to flash off too.. PM used to be good when Paul was in charge of things, but now it seems he takes a back seat and there is no long term guys working there anymore, just hire-ins and casuals who just want their pay packets every week

[@Scooterswapshop]

hondabond FTW!

[@cerpow]

What jet sizes are you using for the 32mm carb? Thanks! 🙌🏼

[@Scooterswapshop]

oh man we have changed it so many times it wouldn't even relate to you any way as unless you live where we are its not the same

[@Robertas_Grigas]

a brand new malossi mhr 172cc kit is 250€ brand new with a a proper head dome also if you are on a budget hexagon 125 has pretty much the same engine

[@Scooterswapshop]

I bought the malossi kit as backup. In case this one dies.

[@claudiodinapoli450]

Salve vi seguo da un po di tempo complimenti sieti molto professionale, volevo sapere che tipo di cilindro è, e che tipo di modifiche gli hai fatto fare??

[@backwheelaj7956]

Hi does the malossi cdi make a big diffrence in power thats noticable?

[@Scooterswapshop]

we did it all at once but its noticeable on other builds

[@jonjomadden4202]

Nice one fire where you get the carbon

[@Scooterswapshop]

Pm tuning

[@shoominati23]

So would you recommend the malossi over the pm cylinder if I was doing one of these and looking for ~ 30hp ?

[@Scooterswapshop]

Yea, pm will make More Power but the quality is not good

[@julleboy90]

Hej Nice bike, i have a Gilera Dna. And i just love That bike, it is pretty rare to. How many Rpm does that kit take? What is it you put on cylinder before gasket? And is it to hold gasket?

[@Scooterswapshop]

Thanks!

[@riderzinc]

Feel like i've died and gone back to 2005

[@Scooterswapshop]

thanks

[@dutch2smoked927]

im going to get a gilera runner 50cc tomorrow but needs a tiny bit of work als it has a chrome plastic set like the shielding/caps idk how you say it english :P

[@Scooterswapshop]

cool!

[@zfloz9895]

Hello! Did you thought about fuel injection on it? I have one to , how much did yours on fuel economy?

[@Scooterswapshop]

I didn't

[@jerrynicholson7689]

U need to try out a lighter flywheel for quicker throttle response 💯💯

[@Scooterswapshop]

I want it stock for wheelies :) more stored energy

[@youthinasia9523]

@@Scooterswapshop clownies

[@millhouse4043]

Where did you get the carbon inlays?

[@Scooterswapshop]

don't bother

[@MrTektek00]

I have a 180cc two stroke with a malossi vario, but the thing will not even get off the ground when giving full throttle. What can the problem be?

[@Scooterswapshop]

could be a handful of things

[@dutch2smoked927]

so funny how you say malossi xD

[@Scooterswapshop]

Yeah I am sure many things people say in many countries sound funny.

[@13nutkiller]

WERE CAN I GET NYC THROTTLE? need shiping to spain

[@Scooterswapshop]

scooterswapshop.com we ship world wide!

[@zfloz9895]

Ciao! Can you please advise me,for what jets sizes I can use for a Hexagon 180cc 2T factory engine, factory marmite, with a 26mm Pwk carburetor,and stock air filter ,or sport filter.? Thank you !

[@Scooterswapshop]

Your best to go to the tuner you bought it from we don't like to step on shops toes.

[@zfloz9895]

@@Scooterswapshop I'm in Romania, and I bought everything from China. It's a bit difficult to do what you suggested. :) :) I just asked for some guidance, other ways I can handle it. But for an easier star up point ,some jet dimensions would have been nice. :)

[@kevincarolina5491]

On the piston rings, how would i know what side is the right side up? And what happens when i get it wrong?

[@svenfokkinga8069]

Its like a bowl, and if you fuck em up it won't fit in the cilinder. so they only fit one way.

[@Scooterswapshop]

we have videos on this

[@korel0019]

krastača

[@andreww.6283]

You gonna tell us anything about the Hayabusa in the back?

[@Scooterswapshop]

There’s a video coming up on that :) it’s gong to be good

[@TheRacer221]

Turbo ????

[@Benko_DieseL]

How much hp did it have in this video with this setup..?

[@Scooterswapshop]

Should be around 35

[@justicekaawa9775]

Does anybody have or know where to buy a Honda elite lx AF05e exhaust

[@Scooterswapshop]

nobody makes one anymore for that bike

[@dandole5490]

Cooling head? It's called a skull cap!

[@Scooterswapshop]

lol

[@lucaserickson3835]

You guys gettin ready to make some Gambler vehicles or something?

[@Scooterswapshop]

Yep!

[@lucaserickson3835]

@@Scooterswapshop nice, we did the Gambler mini bike last year. It was a ton of fun

[@maluku1807]

Tune the stock gilardoni 176 cylinder and you go faster than they pm tuning

[@Scooterswapshop]

Alfio did my bore and he said he’s getting 40+whp out of the pm. What’s the highest on the oem bore? This platform is new to me as they never came to USA

[@maluku1807]

@@Scooterswapshop you can get 40hp out of the pm but then you must stroke it from 172 to 200cc, here in Europe there are many company's that tune the gilera 180 with the gilardoni also stroked to 200cc with a piston from a Yamaha blaster 200 2 stroke and a custom innerhead

[@Scooterswapshop]

Good info!

[@maluku1807]

@@Scooterswapshop do you got Instagram or Facebook?

[@Benko_DieseL]

what roller weight have you fitted?

[@Scooterswapshop]

12.5 right now

[@Benko_DieseL]

@@Scooterswapshop Bro just go on 15.5 from the factory,you will see an awesome bump in performance,because those 12.5gr made my runner go untill maybe 40mph and then it would lose all of its high end rpm..But when i got back to factory,it would go like a rocket

[@jsongatus5981]

Hello sir can i ask a question if whats the name this type of exhaust for italjet dragster 50?

[@pubbiehive]

PM Tuning makes them.

[@alfiewicks1590]

It’s called pm 360 pipe 👍 for 50/70cc

[@jsongatus5981]

Thank you 🙏🏻🙏🏻🙏🏻

[@Scooterswapshop]

looks like theyanswerd for ya!

[@gergoboros8075]

Hello guys can you help me? I want to swap to my Yamaha Zuma a liquid cooled minarelli. You know how to do this? What I have to change? Welding cutting etc etc... Thanks the help!

[@Scooterswapshop]

Yes you can send us an email.

[@gergoboros8075]

@@Scooterswapshop okay thank you guys

[@gergoboros8075]

@@Scooterswapshop what is your email?

[@Scooterswapshop]

@@gergoboros8075 are you located in usa? If not i would suggest checking with the shop you will be getting your parts from, as they can send you exactly what you need

[@gergoboros8075]

@@Scooterswapshop no I from Hungary. I check the shop

[@alainbouwe7799]

The malossi fly cluth is better than the Delta clutch

[@Scooterswapshop]

depends on what you mean by better

[@roberto9171]

it does not say malosi but malossi with two s

[@Scooterswapshop]

what does?

[@gillesvl45]

Avdm he did the same to my 172ccm kit, it did 1 run and my exhaustport was reshaped by the piston, he f'ckd my pm cilinder

[@Scooterswapshop]

ok

[@PchelaUbica]

Signature like kids are doing that How much $ is new nikasil? Isnt cheaper to buy a new cYlinder?

[@Scooterswapshop]

These cylinders come with terrible nikasil. So if I scrapped it I’d still be left with a bad product

[@PchelaUbica]

@@Scooterswapshop bad :(

[@TH-xo4zx]

I never did get the runner. Whats the point of a scooter if you can't carry a case of beer betwean your feet

[@Scooterswapshop]

I think they had to do it that way for the large fuel tank? Not too sure to be honest

[@roypost6126]

You are a wise man

[@riderzinc]

The runner is probably the best scooter ever made for rideability, Balance of it is perfect, Spend some money it will do 100mph+. Throw the beer under the seat with some ice lol

[@Alex-hu5eg]

My gf pointed out that I look like a monkey sitting on a toilet when I ride the yamaha Jog or her Vino. But on the runner I'm a badass 😎 😂 The seat compartment can hold 18 beers and a pack of cigarettes

[@Alex-hu5eg]

​@@riderzincThe front becomes pretty wobbly at high speeds, even with the seibach suspension.

[@mischa64]

PM Cylinder is not so nice, my Suggestion is a stock Cylinder with a "Kübler Kopf" (Cylinder Head) resulting in a higher compression rate... PM is overprized compared to power output...

[@Scooterswapshop]

Stock cyl won’t ever make pm power but I do agree it’s very overpriced for what you get. Looking back I have regrets but I’m already so far into it. No going back

[@mischa64]

@@Scooterswapshop understand that... Just fyi: Kübler 1:12,5 (orig.:1:9,8, Malossi 1:10,5) www.scooter-center.com/de/zylinderkopf-set-kuebler-172-ccm-racing-evolution-2-52mm-piaggio-lc-2-takt-wms02 i drive the piaggio maxi Block an a Aprilia SR 125 with Malossi 172 AC. if you are interested in parts for piaggio maxi, ping me...

[@TEAMVISKAT81]

lol i hope you port that stage6 r/t manifold, because it is only 28mm inner dimension, so is kinda of pointless to use that 32mm carb ;) and the stage 6 r/t intake sucks ass! polini makes a 360 degree 30mm intake for the piaggio hyper big block, that fit all the 2 stroke hiper engines, but you already know that ;) do you really want see someone who can do magic, luck up Daniel Koch aka mrz pwr ;) kzbin.info/www/bejne/Y5XKhmpvj8eLkLs

[@Scooterswapshop]

Thanks, I will probably switch the the rd350 reed and intake. I just had this laying around :)

[@TEAMVISKAT81]

@@Scooterswapshop that sounds like a really good idea

[@natalech5726]

Vor Beginn 2 mal Werbung fuckt so ab direkt dislike

[@Scooterswapshop]

sorry what?

[@riderzinc]

Feel like i've died and gone back to 2005

[@Scooterswapshop]

is that a good thing? :)

[@riderzinc]

Scooterswapshop I done the same build virtually in 2005, Good times. It was a rocket

[@Scooterswapshop]

Awesome!