Well done again "G". i just got my Warrior GT Pro and the back break is definitely squishy. Your video is quick and to the point without the useless banter and bullshit [as usual ]. thanks again...
@GingerOnWheels2 жыл бұрын
Thanks for watchin 🫡
@Ace-Brigade Жыл бұрын
You have no idea how perfect the timing me finding this video is! Thank you so much!
@2WheelsOfCrazy3 ай бұрын
Thank you so much sir. Your channel was the first place i went to find out how to do this. I aim to buy an inmotion rs by march and this video is a life saver. Keep up the awesome videos.
@deskgolfer3 жыл бұрын
Great how to video. I’ve had the squishy brakes for the past 100 miles and it’s getting a bit sketchy when slowing down.
@harveyspecter1653 Жыл бұрын
This is the procedure that solved my problem with a weak rear brake. I tried the bleeding procedure with 2 of these syringes but that didn't solve it all. The trick is pull the brake lever while having 1 syringe connected and then add some fluid. Worked great! Thanks.
@GingerOnWheels Жыл бұрын
Air in the lever reservoir = pumping method Air in the lines or caliper = brake bleed
@hcildwold17514 жыл бұрын
So satisfying to see the bubbles coming out! Now I can't wait to do it.
@dankyourwaifu Жыл бұрын
Ed sheeran scooter mechanic you helped me out man thanks
@kingken53956 ай бұрын
Lmao
@MrEGOMACHINE Жыл бұрын
Very helpful. Exact model and we struggled until we saw this video. Only note is to get correct size of kit.
@KendrickSandefer26 күн бұрын
Might need your help in a few days fixing my rear brake
@TroyCollier Жыл бұрын
Another old school dirt bike trick is to pull your lever tight and put a zip tie around your lever and bars holding it tight overnight. It forces any air from the lines up to the top and gives your levers a nice firm feeling. Trust me this works.
@atmarammanusaya83378 ай бұрын
Can you elaborate, my scooter has similar problem, it's 1 month new and back brake is not working.
@PBST_RAIDZ4 ай бұрын
@@atmarammanusaya8337 1. Squeeze the brake lever as tight as you can and hold it there 2. With the other hand grab a zip tie and tie your brake lever to your handlebar 3. Let go of the brake lever and check that it can't be squeezed any further (if it can be squeezed tighten the zip tie more) 4. Leave the scooter like this overnight (give it around 8 hours) 5. The next morning cut the zip tie and squeeze the lever a few times it should feel solid
@Silver788PDX4 жыл бұрын
Forever useful. Thank you for your efforts.
@eihabm2 жыл бұрын
That was extremely constructive guidance. Thanks for your help👍
@Bigheadedwon Жыл бұрын
This was perfect, I'm semi lazy and after watching 2 other videos on this realized I don't even have brake pad blocks. I don't know how this method compares to the videos where they took off the brake pads and bled it from both ends of the brakes. But, I did this and mine went from barely being able to stop from going 5mph to the brakes feeling like when I got the scooter. Even if I gotta do this once a month I'm good. With this now I'm wondering why the hell the other videos showing this have so many more steps. Thanks for the video sir.
@GingerOnWheels Жыл бұрын
This works if the air in your lines is towards the top of the scooter. If you've got air bubbles mid line somehow, or near the bottom, then bleeding works better (but harder and more time consuming for sure)
@richardlee27402 жыл бұрын
Wanted to thank you sir for all your great videos. I have purchased many scooters from William and sincerely enjoy our Turbo Wheel Phaetons. With thousands of miles racked up, they have performed fantastic with range, comfort, and sheer performance across the board. I encourage anyone looking for a solid stable ride to consider the 11x since turbo wheel does not offer it in this form with the battery upgrade and nutt brakes being the main differences. It is however not one to easily transport because of its larger stable size and weight. Better suited to ride out from your house👍. Also working on custom 3d printed parts soon for it such as light holders, fender systems, front air cowlings, speaker mounts, etc....Anyhow, keep up the great work👍much appreciated by so many viewers.
@FUNKYLOCK4 жыл бұрын
Thanks for this video. I’d love a quick video on how you changed the brake pads
@GingerOnWheels4 жыл бұрын
Sure thing, I can do that. Coming up!
@GingerOnWheels4 жыл бұрын
Brake pad video up tomorrow :)
@originalityisdead.95133 жыл бұрын
@@GingerOnWheels I've just getting my Wolf Warrior 11 last week and I've noticed the brake levers wobble its a lot worse on the left than the right hand side is there any way to fix this ?
@hex617 Жыл бұрын
I just bought a new kaabo wolf King gt and when I wrote it it shut off and said it had brake problems that little red icon and when I watch your video I realized it might be the hydraulic fluid being topped off in the brake levers and yes sure enough it was thanks I appreciate love the concept keep it up
@rabbivj2 жыл бұрын
just found this video, the steps were right on for my wolf king gt, Thanks!
@WorkItJ216 Жыл бұрын
Question: So how do you know when your fluid is good to go? Is it when all the bubbles have disappeared because the fluid has replaced where the bubbles once were? Thanks for this!!!
@dpsycamore41592 жыл бұрын
I just looked for the kit on Fluidfreeride and 59 bucks to fix the problem on a brand new $3,300 scooter is ridiculous!! I'm going to drop them an email and plead my case and see what happens. They were great to deal with during the purchase process so hopefully this they will continue a good relationship.
@GingerOnWheels2 жыл бұрын
Yeah if the scooter is new and has squishy breaks they'll probably hook you up with a kit.
@garrettosborne9545 Жыл бұрын
You spent $3,300 on the scooter and have the audacity of complaining about $60 for basic maitence, you don’t deserve an esctooer 🎉🎉🎉
@driftingcars5246 Жыл бұрын
Thanks works like a charm now great video quick clear and easy 👍
@seanhowe93343 жыл бұрын
Yeah I agree. Love this guys videos. Learning so much.
@method97874 жыл бұрын
Do you have a way to do dyisland brakes please ?
@kelseywhite30142 жыл бұрын
He’s exactly right. Just put it in push the plunger down a little and pump the brakes when you feel it getting hard unscrew it and it’s good
@woundedknee1873 ай бұрын
I noticed you only took off the top Do you also have to remove the bottom to install this juice?
@shahnice02 Жыл бұрын
hi ginger what about the ! sign on display done everything bleeding new 2nd set of nutt hydraulic brakes replaced from the new set rear brakes had worked for a lil while never rode with the sets replaced due to non response from the install on nanrobot 4d+2.0 ill go back to crappy j.a.k brakes this is costly an a head ach
@rtm69303 жыл бұрын
FYI - I have squishy brakes with a Kaboo Mantis (semi-hydraulic) with plenty of the original brake pad left and about 170 miles on it. Did brake cable adjustments and still nothing, it was either way to much or not enough. I ended up replacing the brake pads and the results are night and day. It's back to how it was when it was new. I would guess that the pad material had deteriorated to perform properly. FYI - I wrench my own vehicles, and it's stupid to think that what I did worked, but you need to try it for yourself.
@duskrider1724 Жыл бұрын
What does it mean if you don't get any air bubbles and the fluid doesn't seem to be going into the reservoir at all? Also zero resistance on the brake lever.
@604cpr5 ай бұрын
I had so much air in my GTR’s rear brake line it sprayed out when I opened the reservoir after only a few days of riding. Probably improperly assembled at the factory and air was hiding in the calliper
@andrewrichards55903 жыл бұрын
Awesome job man. Thanks for this video. This help me so much!
@mikeysironrage81033 жыл бұрын
Yea but u didn't show the part when u fill it up when do u fill it up before u bleed it after,??
@mikeysironrage81033 жыл бұрын
Ginger do I fill it up with hydraulic fluid first and then bleed them??
@GingerOnWheels3 жыл бұрын
You shouldn't need to bleed them entirely.
@soffianfar1d5592 жыл бұрын
Hello I have the same zoom brakes when I press the brake I need.to.press it quite alot for it too stop is that normal ? Or need bleeding
@martinkent66542 жыл бұрын
Hi ginger, great video! I have just bought a zero11x with 400miles on thr clock it has the zoom brakes and really dont seem very good, i have to really pull them on hard to stop! the back lever come almost all the was to the grip, would you say this is due to low hydraulic oil/pads or are the zoom brakes just not very good?
@klg10012 жыл бұрын
The zoom brakes aren’t bad. When mine were new they had very little travel to the lever (maybe 1/2”-3/4”) and you could easily stop the heavy scooter with one finger on each lever.
@grundyman262 жыл бұрын
Ive followed your steps , the brakes felt just fine , other than the levers wouldn't snap all the way back , and when i went to test ride it , the brakes canceled the motors
@kingstergaming72422 жыл бұрын
You probably need to adjust your brake sensor next to the Lever. Is the other cable next to hydraulics brake line.
@mikeysironrage81033 жыл бұрын
What's that black light on the KAABO that's the one I want can u send me a link
@zaidgill12813 жыл бұрын
Ginger which one size of adapter i will buy to refule zoom brakes ?
@microsoft16653 жыл бұрын
Regarding metall ring in brake lever. R we supposed to remove it or have it on while bleeding brakes?
@carmelolocasto13 жыл бұрын
I filled up the line and for some reason I can’t get my rear brakes to function could it be at the back Reservoir
@HK_Martin3 жыл бұрын
where can i buy those brass tips? i have no idea what they are called, where to get them. i got Zoom hydraulic Scooter brakes, and i cant find the brass tube screw things anywhere.
@michaelburwell793510 ай бұрын
Do the 3 mm Kabo rotors from Ali fit the gtr ginger? Voro has 2 mm and myn that came on the scooter are 2 mm. But Ali has 3 mm
@GingerOnWheels10 ай бұрын
The ones on Ali probably say 3 but are actually 2.
@rogerwilkie85553 жыл бұрын
Are there any scooter ride groups in the Seattle area???
@NiteMarcher3 жыл бұрын
Yup its time to do my rear break hydraulic breaks, its really squishy to the point that it almost dosnt work.
@petergreezly7126 Жыл бұрын
could You help with leaking calipers?
@MustafaAhmed-ql8tg3 жыл бұрын
Ginger the brakes on my wolf won’t bleed . I try to fill them up but it’s as if there is no space for the fluid to go and the brakes are completely squishy no tension at all idk what to do man
@ThBraveSteed10 ай бұрын
Does the p100s have hydrolic fluid?
@Sammyi12342 жыл бұрын
Is a hydraulic fluid on a wolf king pro on the right hand side of the handle bar or the left hand side?
@andrey7887 Жыл бұрын
Please help, just got a new scooter but once I press rear brake once it is not working, I have to press and release it for around 5 times to be able to work. What it might be ?
@charlesdarkon3 жыл бұрын
😂 that cat 👍👍👍
@TVideoupload3 жыл бұрын
Would a bike shop sell this? My front brake has maybe 3% stopping power left -_- ps where did the fluid go since I saw no leaks
@hyrulemasterchef95732 жыл бұрын
Ginger I’m super frustrated. Voro sold me the wolf king gt and the front brake lever came squishy. I just followed these exact steps and as I pumped it, I didn’t see the air bubbles. I managed to squeeze all the brake fluid in it, but it still has absolutely 0 pressure. What next?
@GingerOnWheels2 жыл бұрын
More mineral oil. Sounds like you didn't get enough. Blown away they would ship you one that low. Make sure it's not leaking out of the caliper.
@hyrulemasterchef95732 жыл бұрын
@@GingerOnWheels thanks I did end up getting that done ✅ you are correct. I’ve also noticed since these are power brakes, you probably don’t really need brake fluid anyway to stop correct?
@kieranjones4573 жыл бұрын
Hey man, I’ve followed the exact same method you have used 3 times now, and my front brake it STILL spongey, I cannot work out for the life of me why it’s doing it. I had a shed load of air come out and I carried on pumping the brake for a while just incase there was an air bubble further down but nope, full pressure. As soon as I put the screw back in the reservoir and pull the brake in it’s spongey again, the bolt that holds the brake line onto the front caliper was slightly loose so I bought some safety torque keys, used those to tighten the bolt and tried to bleed the brake again, but nope still no luck, I am out of ideas, any help would be appreciated 👍🏼 cheers. (P.s it’s not my brake pads I’ve taken them out and checked them and I’ve only done 40 miles) wolf warrior 11 pro +
@GingerOnWheels3 жыл бұрын
Maybe you need to bleed your brake lines. You'll have to find a mtb channel to help you with that
@bigcity4203 жыл бұрын
Hey Ginger, do you know what number is on the torque wrench you used, I had to order the fluid kit from fluid free ride and they sent me the kit but it fits my kaabo king but not my warrior. it seems like the "screw" is smaller then the one on the king. same zoom brakes. any suggestion, can I use another allen wrench. I cant wait another 10 days for them to mail me the right one. thanks john.
@GingerOnWheels3 жыл бұрын
Use whatever tool you need to in order to get the job done!
@aerofpv21093 жыл бұрын
Ginger ... this is not proper. The squeezing / pressure is creating tiny effervescent bubbles. For a lever bleed your not supposed to squeeze in any brake fluid into the brake reservoir. Simply pump your lever and as the air bubble comes out, the fluid via gravity will pour in.
@GingerOnWheels3 жыл бұрын
Well it clearly works both ways.
@kakmaanderson39813 жыл бұрын
hi my brake line nut to the back zoom caliper broke where do i find them!
@eddiekytia4 жыл бұрын
Ginger..... what's up brother? When your squeezing the brake lever over and over are you pushing the needle plunger down to force oil in at the same time or leaving the plunger alone while your squeezing the lever? AGAIN...... THANK YOU FOR YOUR TIME,YOUR KNOWLEDGE,YOUR VIDEO CONTENT,AND YOUR HELP!!!!!!!!!!!!!!
@GingerOnWheels4 жыл бұрын
Yo! Ideally you pull the brake lever over and over while pushing the plunger down a bit. Easier said than done....
@SkyRocket1592 жыл бұрын
I'm no expert but I don't think you can push fluid in if the other end of the line is closed.
@StravedOfAttention3 жыл бұрын
why do you need so much fluid in the syringe?, it doesnt even look like you refilling the lines same amount you started with is still in the syringe i don't understand
@damaribrackett1159 Жыл бұрын
Is this the same for the vsett 10+
@trollhunter88428 ай бұрын
This is a lot easier then pumping oil from the bottom, but does it really get all the air out?:
@GingerOnWheels8 ай бұрын
It usually works enough to get the brakes working again, but if you want them to feel new then you have to do the full brakebleed process.
@trollhunter88428 ай бұрын
@@GingerOnWheels Thanks. How often do you have to do this? Seems like a royal pain in the butt.
@GEORGE-lo4iq4 жыл бұрын
Thanks
@kevmack1012 жыл бұрын
yooooooo lol i fliped my scooter over to change the front tire and now I got the wheel back on my front brakes don't work. What do you think happened ?
@Slamjam883 жыл бұрын
How do you adjust the brake lever travel? My scooter has the front lever adjusted so every time I squeeze it tight it literally touches the hand grip and I want to adjust it so it doesn't do that
@GingerOnWheels3 жыл бұрын
Add fluid. Like I did in this video. That was the whole point.
@alexandrelarose58852 жыл бұрын
What is the name of the oil i should buy for my wolf king gt pro for my break please
@GingerOnWheels2 жыл бұрын
Just look for hydraulic brake mineral oil kits. They usually come with adapters and one of them will fit the brakes you have.
@max-jayderomero77434 жыл бұрын
Hey its Max (5309) in Seattle/Redmond. AWESOME Channel! Liked/Subscribed. I was unfamiliar with this particular domain (as I mainly frequent Vegan KZbin Channels) - but your content, technical knowledge, delivery and ...well artistry have me infatuated with the science of curing "squishy brakes"! You made oil seem as awesome as a Vegan Hemp Dressing video! ... and THAT is truly a feat! Keep up the great work and you got a FAN and I Got a New Hobby! Max
@GingerOnWheels4 жыл бұрын
Hey MJ! Man, I completely would've forgotten someone's KZbin name that they mentioned, I'm amazed you remembered! Thanks for the kind words, I'm glad you like the channel!
@ImpyLane2 жыл бұрын
How to tell someone's a vegan/vegetarian.. don't worry, they'll tell you!
@Zzzz..8498 ай бұрын
I don’t have that little pipe bit and all the fluid keeps leaking out the top when I pump the brakes
@GingerOnWheels8 ай бұрын
Bummer. You can get the pipe from a pet store in the aquarium section
@bombfirst1able4 жыл бұрын
I have the same problem Ginger where can I get the kit from other than fluid free ride I haven't rode mine yet I'm waiting on their response I might be waiting for 2 weeks do they make their own hydraulic fluid with mineral oil there has to be other shooters on the market that have this thank you
@GingerOnWheels4 жыл бұрын
I couldn't find it anywhere else... You might get lucky with a search on Alibaba for Zoom brakes, or something similar. GL.... 😔
@bombfirst1able4 жыл бұрын
Question Ginger is it anyway I can get empty kit from offline and get the bubbles out and reuse the fuel because my wolf warriors brand new and it's not showing any leakage of oil I've been hearing people talk about reusing it in the instruction manual it says like don't ride it until you contact the people you purchased it from so it is a no-go with taking a ride I was trying to say I had the same problem with the lock in screws on both sides coming out but that I bolt 5-18 you are a life saving if you have any information thank you so much
@bombfirst1able4 жыл бұрын
First of all I want to say thank you so much for helping me out with everything with the warrior I finally got the hydraulic refill kit fluidfree ride but had to pay for if it had to get to since y'all say every 6 months it might need to be changed anybody need some it's up for sale
@doncattarusa13552 жыл бұрын
Where can I buy the brake bleed kit?
@GODISMYJUDGE4 жыл бұрын
I’m guessing the brakes were squishy when you got it. Mine seem that way compared to hydrolics on my bike. I’m guessing Fluid Free Ride should include that kit with some blue loc-tite to all the loose bolts.
@GingerOnWheels4 жыл бұрын
No they were great when I got it. But after about 1600 miles and some sets of pads later, it got squishy.
@GODISMYJUDGE4 жыл бұрын
Ginger On Wheels Wow 1600. Nice. I’ll have to try again with the regeneration off. It’s a bit of a weird feeling at first as the regen braking seems at but aggressive and the. I let off and reapply and I guess it just feels mushy compared to the initial regen braking.
@peteythebull8123 жыл бұрын
Any one know the bleed screw size on hydraulic zoom brakes lever? i broke the bleed fitting, is it m4?
@mavzy4 жыл бұрын
Hello, is this the same as bleeding? Or is this just refilling the mineral oil? Ordered my bleed kit online and it comes with a funnel. Not sure on how to use that.
@GingerOnWheels4 жыл бұрын
Not the same as bleeding. Just refilling.
@mavzy4 жыл бұрын
@@GingerOnWheels but how would you know whether you need to bleed or refill?
@GingerOnWheels4 жыл бұрын
If fluid leaks out visibly, or if you need to replace the fluid entirely (maybe it's dirty or contaminated) or there is damage to the brake line that needs repairs, then you bleed it.
@mavzy4 жыл бұрын
@@GingerOnWheels thanks alot! 👍😊
@irhuz86832 жыл бұрын
@@GingerOnWheels Can apply this to my Z10X? As in the refill?
@djjosh30964 жыл бұрын
Any online store where i can purchase brake fluid kit? Fluidfree is out of stock of the brake kit.
@GingerOnWheels4 жыл бұрын
I'm not sure... Check Alibaba. RevRides might have a few for sale if you wanna hit them up. Good luck!
@Studat3 жыл бұрын
hey mate, I have a zero 10x and at time I lose the front brake. It's not the hydraulic type, just the cable disc brakes. I then need to back off the cable screw and re tighten. Any idea what the fault is?
@GingerOnWheels3 жыл бұрын
Use loctite on the nut and screw then it won't come loose by itself.
@Studat3 жыл бұрын
@@GingerOnWheels it wasn't loose that's the thing. it's like the piston is getting stuck. very strange sensation in the hand when it happens as all looks normal
@GingerOnWheels3 жыл бұрын
@@Studat I see. It sounds to me like you might have a kink or hard bend in the brake line. Thats my only other guess.
@cocarc094 жыл бұрын
Hi My name is Ruben I from NYC I do the same method to my rear brakes but went I put everything together etc I press the brake and stop for 2 seconds en get lose went I brake I don’t know what to do I only use regenerative brake & front I never open the scooter to see what happened
@GingerOnWheels4 жыл бұрын
Im sorry Ruben, Im not sure what you're saying. What's the problem? Your brakes come loose?
@mcp000014 жыл бұрын
Can you please help me out on upgrading brakes on a Zero 11X. I want to upgrade from stock zoom brakes to magura mt5e.
@GingerOnWheels4 жыл бұрын
What do you need help with? Remove old brake levers and calipers, then install new ones. The only thing you need to be wary of is if the new calipers will fit on the adapter that you have to mount them to the frame. I've never seen this upgrade done on a Zero 11x so you might need a custom mounting bracket.
@mcp000014 жыл бұрын
@@GingerOnWheels I have already ordered the adapters, but I wish there was a KZbin step by step tutorial on how to do it on a Zero 11X. There is a lot of upgrade and modification videos about dualtron thunder, but barely any for Zero 11X.
@shglbmx4 жыл бұрын
what size thread is the brass fitting? my bleeding kit didnt come with one and i need to buy it separately fml. advice ASAP would be great!
@GingerOnWheels4 жыл бұрын
I couldn't tell you. :/ My first kit didn't come with one and I had to get another entire kit.
@shglbmx4 жыл бұрын
@@GingerOnWheels literally the same situation im in now. ughhh. can you link to a kit that has a fitting? would be sincerely appreciated. trying to get the part by weds for a group ride. thanks in advance buddy! appreciate you responding so quickly!
@quannj4 жыл бұрын
I actually have this issue currently on my rear brake, even after contacting fluid and getting this kit, bleeding the air it wouldn't take any fluid, also have a slight clicking sound from the lever..they brake works.just isn't confidence-boosting when stopping from 40+..
@GingerOnWheels4 жыл бұрын
Sounds like maybe you need to bleed the brake line entirely.
@quannj4 жыл бұрын
@@GingerOnWheels fluid sent me a new handle
@mce32102 жыл бұрын
My wheels on nami feel “tight” it seems like part of the wheel is breaking when I ride it or walk it... it sound like it’s rubbing against something I tried the loosening the bolts and holding the break but it’s still happening... so annoying I literately just took it out of the box and having this issue.
@GingerOnWheels2 жыл бұрын
Weird... if it's not the brakes it's probably just the natural resistance of the electric motor. Maybe bearings, but then you'd hear funky noises coming from the wheel when it was spinning, like a click or grind.
@meantr50904 жыл бұрын
I have break warning light do you know how to fix it
@GingerOnWheels4 жыл бұрын
There are two wires coming out of the brake lever area. One is smaller. Screw the nut counterclockwise a quarter turn. In my experience that will fix it.
@lil----lil4 жыл бұрын
Dear Ginger: I've a Currus NF with a LT-D777 Model Hydraulic Brake? Does anyone know what who makes it? There's ZERO info on the internet.
@GingerOnWheels4 жыл бұрын
Never heard of it... Sorry.
@djjosh30964 жыл бұрын
I had a nanrobot d6+ how can i maintance my hydraulic brake?
@GingerOnWheels4 жыл бұрын
If you press play on this video, the information you need is contained inside.
@hoyvintagecycles29362 жыл бұрын
my matise brakes act like antilock the pulse is this a bad settup? or
@GingerOnWheels2 жыл бұрын
You can turn the abs setting off in your p settings. Instructions are in the manual.
@steveh.91702 жыл бұрын
@@GingerOnWheels thanks, i eventually found that, when i contacted voro they had no clue what i was talking about. ABS feel much different in the motorcycle world im in. thanks so much for the reply i know your getting many questions. I run a vintage motorcycle shop in indiana and am entering the hobby of electric , i also fly electric large scale RC air!! have a great day!!!
@eddiekytia4 жыл бұрын
Theres no link to the brake kit... do you know if fluidfreerider sells the kit for the warrior 11 it's not listed on there website
@GingerOnWheels4 жыл бұрын
I just contacted them and they gave me the kit like I said in the video. If you contact them they have spare parts for all scooters that aren't on the site. Also, there is a link to a brake kit, it's in the description to this video with bold next to it close to the top.
@eddiekytia4 жыл бұрын
@@GingerOnWheels daaaaa I'm sorry I see it. Dont know how I missed it! Thanks.....AGAIN...LOL
@c2thew1564 жыл бұрын
@@GingerOnWheels the link takes you to a google voice call?
@gebviser37704 ай бұрын
How do you purchase a kit,or where???
@HK_Martin4 жыл бұрын
easiest way, more efficient then other methods
@perrygoldstein22174 жыл бұрын
Hey broseph can you please re link the kit I cannot open that short URL
@GingerOnWheels4 жыл бұрын
Just as soon as I can find it... 🧐
@perrygoldstein22174 жыл бұрын
Ginger On Wheels 😂 ok 👌
@GingerOnWheels4 жыл бұрын
bit.ly/BrakeFluidKit
@perrygoldstein22174 жыл бұрын
Ginger On Wheels thanks allot for that dude. I’m in Australia I’ll suss it out tomorrow
@cilva7able4 жыл бұрын
My brake is stuck. It doesn't open up unless I take it off the rotor and pry it open and if I pump the brake handle again it will close but won't open up again. Will this method work on mine?
@GingerOnWheels4 жыл бұрын
First I would try replacing the fluid in the line, then try replacing the lever, then the caliper if that doesn't work.
@cilva7able4 жыл бұрын
@@GingerOnWheels When you say replace fluid in the line, do you mean adding more like you did in the video?
@GingerOnWheels4 жыл бұрын
@@cilva7able in this situation I think it would be preferable to bleed the line and replace the fluid entirely.
@cilva7able4 жыл бұрын
@@GingerOnWheels Do you have any videos on bleeding the line?
@GingerOnWheels4 жыл бұрын
@@cilva7able no I don't period but there are lots of mountain biking channels that I'm sure have that sort of video. The concept is pretty much the same
@mikebass59114 жыл бұрын
V. USEFUL..........THANKS
@GingerOnWheels4 жыл бұрын
No problemo
@mohsan56993 жыл бұрын
How do you know when you are running low on the Fluid for the Brakes?
@GingerOnWheels3 жыл бұрын
The brake levers will squeeze back way too far and not produce adequate stopping power
@blessdatrack4masssoundprod7733 жыл бұрын
Good video thank you I got da nami
@BlokeJuice4 жыл бұрын
What are the "tiny little tubes with brass tips" acutely called? My rear break and this problem so I purchased a break bleed kit bit the attachments are to big and don't fit. I tried to improvise with a small rubber o ring but got no air bubbles to come out so I obviously didn't fill it up and my break is still way to soft. P.s I have been watching the chanel for some time and have shared it to all my scooter buddy's, all the best 🙂
@GingerOnWheels4 жыл бұрын
Man, I wish I knew. Even the kits are hard to find, if it weren't for fluidfreeride I'm not sure I would've been able to find one so easily. I would imagine the technical name is something like 'threaded reservoir adapter' or something along those lines.
@duelz93663 жыл бұрын
Best fucking channel I just bought my Wolf Warrior X and you’re helping me so much Much love brother Edit: No homo
@electric_things_3 жыл бұрын
🔥🔥
@Ryansorenson992 жыл бұрын
My kabbo wolf king has a leak in the front brake it’s leaking out of the actual brake hate these pos brakes ! Of course the tools needed for brakes don’t come with the scooter
@tonytate21974 жыл бұрын
I come here for all my scooting knowledge
@GingerOnWheels4 жыл бұрын
If only Segway traded publically.
@Jaykilla19813 ай бұрын
I wish you were my roommate bro.
@royyeoh86623 жыл бұрын
I got leaking at the reservoir and also the rear wheel hydraulic brake. Pls help