Building THE ULTIMATE V8 DRIFT TRUCK in 10 MINUTES!

[@_Gingium_]

This build has been SUCH an EPIC adventure! I learned so much during the process, from fabricating, to actually drifting, and I have all of YOU to thank for that. If you have a moment to SHARE THE VIDEO I'd REALLY appreciate it. It helps KZbin know that people like the video and it'll start recommending it to new viewers! THANK YOU!

[@Obeyboss22]

Do you know who bought your Nardo grey rx7 and can you get it back and make that a drag build

[@vegas_the_trucker1595]

www.trucktrend.com/how-to/chassis-suspension/1305dp-curring-death-wobble-tightening-up-your-steering

[@TheRainbowBullet]

I dont remember when I subbed but I did because I liked your content and I still do I purchased a 1994 Mazda b3000 for $300

[@gordanagoran86]

Mate i didnt even notice this video

[@adamcroteau8711]

I'm so hyped to see this thing with a procharger

[@Tommyhaoh]

One of the most underrated builds on youtube.

[@_Gingium_]

[@HELIXGHOST]

4 sure

[@gabrielpokrajac5941]

It is better than 90% of this years SEMA

[@mattk252]

@@gabrielpokrajac5941 yea it runs

[@daviddntait]

Read your comment while thinking the same damn thing! Badass truck!

[@JamesFreeman1]

For those who are new to this stuff, "drifting" is a driving technique that is implimented with the sole purpose of extending tire tread life.

[@cheetahgaming3642]

underrated lmao

[@Seventhsu]

Ah yes, extending tread life

[@COMBATCOACH13]

I thought it makes your tires ware down faster

[@edgiestofcars]

Cole Plecha that’s a lie

[@Titoo.1]

Cole Plecha that makes no sense obviously it is made to extend tread

[@57F100]

Love that you got straight to it, no trips to the supermarket for milk, no talking for half the video, just perfect!

[@jackellis7216]

The craziest part is that he did it in 10 minutes

[@imasclepius]

64 likes and no comments, cereal.

[@deer485]

@@imasclepius i dont like cereal tho

[@zynifi]

Ikr, how tf is that even possible!

[@imasclepius]

U don’t like cereal, I do

[@deer485]

@@imasclepius thats surreal

[@tabkey]

Damn, imagine what this guy could do in 20 minutes!!

[@someguyontheinternet5944]

Probably build 2 drift trucks

[@manqobazulu6140]

Probably the iron man suit

[@277-]

build drift train

[@mavrigs2964]

V8 cybertruck lol

[@yeetyfreety6938]

This is what the mechanics must feel like when I put a v12 in a tiny little car in forza horizon 4.

[@readmyusernamecauseitssoreally]

Yet it's somehow done instantly regardless of the car

[@yeetyfreety6938]

Jason Dupree they must be f1 pit stop guys. 30 secs to engine swap.

[@payneheller8431]

Xd ,true

[@ΑνθουλαΚαζαντζιδου]

Hahaha

[@jke_yt6996]

Or when you put the lowest suspension and biggest engine as well as the largest drift tires on a tiny little itty bitty truck

[@richardheaton6406]

I have been modifying cars for many years you can hold your head high you did an excellent job and it was built not bought be proud not many young men can accomplish this kind of quality in today's time

[@sunyun4425]

I agree on the skill set but not many young men are fully bald headed and have a full blown fabrication shop either,,, he looks at least 35 years of age

[@rafaeld4451]

Bda Bnd he’s 23

[@sunyun4425]

@@rafaeld4451 he has a full blown fabrication shop at 23 and he's already bald? I guess he took out a big loan after graduation from the vocational school he attended,,,

[@kobewilton9978]

Seems expensive when you add all the costs

[@drewwright8608]

His you tube channel probly pays for it

[@ninjatacoshark]

Big respect for using a 1uz instead of an ls for the swap. 1uzs are great motors

[@simonhill6267]

But heavier than a ls though?

[@mrarivv0007]

@@simonhill6267 I get your point but like... What's your point? Lol. Yea power to weight. But what about it's a mini truck? That's good power to weight already.

[@simonhill6267]

@@mrarivv0007 yea just wondering about front to rear weight distribution, which I imagine is already pretty front biased in a Ute

[@thebaddestogre-3698]

@@macmurati the only ls that's lighter than a uz is an aluminum 5.3. But yes I totally see the downsides of the engine, but the reliability issues are almost non existent compared to an LS.

[@thebaddestogre-3698]

@@macmurati uz engines dont have secondary cam lobes, and do not have a chain tensioner. It's a belt. And I've never seen an issue with tensioners. Are you sure you arent thinking of the 4AG engine?

[@factorycamper1444]

This dude would fit in perfectly with the takuaches at my school.

[@nathansandoval2186]

Torquiendo no quema CUUUUUUH

[@MohOGK]

@Ivan Espinoza and has power lol

[@darrienburch924]

Lol the valley

[@beatrice9760]

SI KEMA CUHHH

[@diegoavila4379]

This is not a Chevy

[@Hellowadupme]

Tried to do this in 10mins with my truck. Took more than 8months. Very confused.

[@ArmandoFloresAvila]

Lmaooooo

[@jaydz7170]

Directions just weren’t clear enough

[@johnbell1577]

He's the flash that is why he can do it in 10 minutes and everyone else is ten months plus

[@christhopherlasher2828]

@@turn-n-burn1421 I hope you washed your hands

[@jobobby664]

It just seems that fast because he did a timelapse he didn't really build it in 10 minutes lmao

[@_Gingium_]

Thank you all for the awesome comments! I really appreciate it. A lot of you have questions about the truck so here are some answers. Engine: Toyota JDM 4.0L 1UZ (vvti version). Engine came out of an Aristo I believe... Trans: Nissan SR20 5-Speed. Used a custom adapter plate/clutch to mate it to the 1uz. Rear Axle: Ford 8.8, 3.73 gears with a LSD Front Suspension: Fortune Auto Miata coilovers, 12k springs, stock arms, chopped knuckles for a little more angle. Rear Suspension: Custom 4 link with QA1 coilovers. 10k springs. ECU: Link ultimate ecu, custom wiring harness I'll add more info if I see any more questions! Thank you again!

[@Sbinott0]

Front lip?

[@danielredheffer9309]

Just wondering if you plan on upgrading the brakes on your setup? But a really nice, clean build overall. Glad to see someone so happy and passionate about a build.

[@enriquewellmann3809]

What front bumper is that?

[@m0uz]

Roughly how much $ did this whole build run you guys? Such a clean project!

[@818k5krawler]

Where did you get that trans adaptor???

[@chriszanni9769]

The second I saw you using a grinder without gloves I knew this was gonna be a dope build

[@999531s]

Sid from Toy Story has moved on from toys to cars.... good to know

[@osamabinlaggin69]

And he is not even destroying them... Proof that people can change

[@noquemalive7111]

Yes

[@victorrosales35]

Lmao 😭

[@GirthQuake9000]

Eh same thing

[@masonfree7185]

Apollo 😂

[@fishingthe402]

Truck went from yes sir I’ll have her home by 9:00, to your daughter calls me Gingy too

[@ardenunger2932]

Spilled my bartle skeet reading this

[@SnuffySpaghetti]

​@@ardenunger2932 You spilled your what?

[@Matthew-oj2mq]

LowQ lmao

[@kylesantell4603]

LowQ it’s mountain dew

[@Capt_HorsePower]

🤣

[@zaywilds3579]

Glad KZbin recommended me another banger. Stunning work and most of the time a one man show. Such a talented soul.

[@chrisaustin4038]

This thing needs to be taken to the Hoonigan shop for the build breakdown 💯

[@JerzeyBoy]

Likes for "I can't believe it's NOT an LS Swap!"

[@LargoC]

Good! Gotta have a ford motor in a Mazda

[@wolfemancola]

@@LargoC i agree it would make sense, but it says he used a 1UZ which is a Toyota engine

[@GLZEPHEAD69]

yeah it would've made too much power

[@bigmario768]

Can't believe they made such little power out of a 5 litre

[@ihearti24traffic]

@@bigmario768 it's a 4 litre

[@Atomicneko3000]

I remember the painful months it took for the wiring harness. Glad we’re finally into the glory times of being able to drift this beast!

[@echota23]

Looks like it's time for roll cage.

[@alisastewart1337]

Caleb, I am very proud of all your hard work...Love Mom Stewart

[@jesushinojosa4935]

I love you

[@kierandouglas43]

Love you mum

[@iGreg0195]

greetings from a mechanic from venezuela. There is no better combination, mechanical + build + heavy metal = epic my brothers, my respect!

[@cutecats5750]

The smile when your build starts up. “Oohh shittt!!”

[@old_romans]

Seriously one of the best feelings

[@anthonyramirez2576]

hei hei wet panties

[@splixsky]

this is legit the most well edited consolidation of a build i’ve ever seen, 👏👏👏👏👏

[@Itsmeyourfather]

Gingium: *only installs one seat* Camera man: am i a joke to you?

[@jonathansalgado3013]

Bro this build is badass. I love how you made everything for it at the shop

[@takcleberry]

I don’t believe you did all that in 10 minutes

[@Misfitpathfinder]

Ya I'm calling bull shit

[@yaseenyasir2504]

Kyle Schumacher no this was over a Year, this was a time lapse

[@yaseenyasir2504]

Scotty Killsz over a year mate

[@NotSoSmartAsian]

@@yaseenyasir2504 r/woosh

[@yaseenyasir2504]

notsosmartasian yeah i was slow to the joke

[@Bicifaidate]

power!

[@CalvinKlaassen]

OMG i forgot how innocent the stock truck was

[@henrikjonsson1722]

The music in this was on point, really good video

[@verdatum]

First time here. The editing on this video is just phenomenal. There is SO MUCH WORK compressed into such a tight, entertaining, and informative video. Great job. Thank you.

[@Absolute_Unit135]

Not gonna lie, was expecting a slideshow of photos and some video but instead got a perfectly paced build. You know your craft well, my guy. Kickass job

[@bmart7583]

This is honestly my favorite build I have ever seen on KZbin. Keep doing the good work man

[@loganpigeon1789]

This is easily one of the coolest things I’ve seen in a while, awesome build man!

[@traceygilles7581]

Ive watched every single video since u bought the rally miata keep up the content I love your builds

[@Justindrifts]

This is the best “in 10 min” video on KZbin. The editing is on point, music is 🔥 and very suiting. Always fun to watch as always the amount of fab work done Yourself is insane.

[@xxIONBOMBxx]

I respect you Gingium for shedding a light and making the Mazda minis a chunk of a name with your hands. As an owner myself, much love brother

[@5.793]

When sid from Toy Story wants to tokyo drift

[@owenlee4585]

rip gingium, disrespected to death

[@pipingsparrow375]

@@owenlee4585 x.5lb

[@dannyswitzersolis8569]

Nice. Mean but nice couldn't think of where i seen him before

[@barxracerful]

I was thinkin Aang from Avatar

[@mrRazorism]

Lol d grin look

[@tlhomphokegasitswe5445]

i have watched the whole project, a fan.. but please do something about the speedo cable

[@Fat_Jag]

My thoughts exactly. That bothers me so much.

[@6.4scat36]

What’s that

[@monkey2275]

@@6.4scat36 are you serious?

[@joeg.1119]

I guess i wasn’t the only one to worry about that lmao 🤣......

[@joeg.1119]

CleanBowels if u don’t know why u comment than..??? Mmm...😌😌🤔🤔🤔🤔

[@ghostpimp]

i really look up to this man , this is literally my dream

[@rickyhineman4124]

The mid to late 90's B2200 is my favorite pickup, been thinking on something like this for a while. Thank you for letting me fulfill my dreams through you for 10 minutes haha

[@marcussniper4253]

Anyone else noticed starting at 9:41 how the wiper blade started to lift when he was powering down the strip...lol

[@cheetahgaming3642]

no shit... it happens in my cars even, itll happen on yours too once you go over 160kmh

[@damndman2009]

I would loose the wiper blades! They are only dragging him down! Too funny watching them lift off!

[@cheetahgaming3642]

Eureka Moment it gets pretty distracting when there in the middle of your windscreen and you can’t turn them on and off again 😂

[@acerusea5156]

I love the 1UZ (My Lexus is powered by a nonVVT one) and I really appreciate using one for this build. They're great engines until the starter goes bad

[@glynispillay2682]

They OK but very under powered

[@TheBenBen253]

I love b2200s, this looks like a great build, must be a lot of fun on the track

[@ardenunger2932]

Last time I was this early the wheel on the RX7 fell off

[@evankirschenmann4653]

I feel bad for laughing

[@astrum_nauta]

Last time I was early on a gingium video he didn't even have the rx7 yet

[@pyrorenegade4983]

Last time i was this early when he was doing drag races in Fm6

[@sidewayzdaily9907]

@@pyrorenegade4983 is it bad i forgot thats how i found him?

[@Scribles]

🤹

[@CarClique101]

Its always fun when you hear the engine start after your build. You guys are good.

[@therealTuggatron]

im literally smiling ear to ear watching you going full send

[@anttisalminen3]

This was really well edited and i enjoyed your choice of music in this one. Good job.

[@dezk555]

Yeah nice music, what's the name of the second one ? Thanxs.

[@SheenylHassan]

This is what happens when Caillou grows up and becomes a gear head drift king.

[@dustinpoor4536]

That's freaking awesome to see a young dude getting in there an jus doin it!! That's badass!! Very nice job!!!

[@sprk_music]

9:42 you need spoilers for the windshield wipers :D

[@automan1223]

I like that you take old vintage vehicles and hop them up. Volvo wagons & Mazda pickups ! Great work !! Work as hard as you can before your body gives out.

[@PureGhostMG]

Damn... I just admire that you know how to do all of this. Jealous.

[@luisvilla799]

Yeah me too wish I knew how to do all this!!!

[@nickbarton9738]

Ain't nothing to it but to do it. (Equiptment helps a lot lol)

[@Fitothemaster]

I like everything that has to do with rebuilding cars.

[@thesnipingduck123]

Get into it, do it, have fun

[@josephirey4660]

As a paint/prep and body/detail guy, damm i wish i knew motors/suspension. You make it look easy and maybe it is for you but i never got into that part of automobiles. Mad respect bro!!!!

[@ryangray218]

I forgot how high It was🤣🤣

[@_Gingium_]

Same!!!

[@carlosevfaj]

Me too

[@patrikronkko3216]

when we will see more datsun videos ? Greetings from Finland!

[@mathieunadeau5984]

I'm subscribed now. Never has anyone made me want a B3300 so badly ever.

[@lukascukanec4803]

I like how you did all of this by yourself👍🏻 Good work

[@molyneauxproductions5423]

This was awesome!! First I love that you picked this truck and everything you did with such detail was so on point... what an accomplishment! Thank you for this!! And nice welding too!!

[@VWayyyyyyyy]

The amount of views for this is well deserved. The dedication behind this build is top tier!

[@ramotive]

You should paint the lower part of the truck black, up to where the front bumper ends, somewhat like the ae86 if u get me.... I'd look cool

[@nevanlagaavit3030]

Try doing a drag inspired 4x4 like the thiland peeps...great vid ging keep it up

[@SkorpyoTFC]

I hate seeing older cars that are getting harder to find being chopped up, but this job is CLEAN.

[@kojoyeboah7]

I honestly wish I was doing this for a living!😂. Fantastic build!

[@nickfury1279]

Wow, this truck has come such a long way, I remember when you put the 1UZ in

[@nolancrane5987]

Is it a 1uz or 3uz? First time seeing this truck just curious

[@abdulazizalkhaldi8274]

Nolan Crane the engine is 3uz not 1uz

[@nolancrane5987]

How can you tell? Or did he mention it in a Video?

[@israel42hurtado]

Nolan Crane that’s defiantly a 3UZ. If you know how the engines look like, you can tell them difference between them right away.

[@martinsmit6432]

Respect for your build man. I've got the same model Mazda but only a double cab. It's been fitted with a 350 chevy motor pushing around 300hp to the wheels tho. Straight pipes makes sure everyone notices and hates it lol. Not crazy power but enough for what it is. But love to see that here and there some people haven't forgotten about these workhorses begging for a bigger heart. Keep doing what you're doing bro!

[@Russxm]

Man I wish I had the talent and facilities to make something like this happen.

[@Ahats5]

How do you eat an elephant? One bite at a time. Everyone starts somewhere... Pitter patter, best get at 'er!

[@asaltnado5168]

With that attitude you never will just do one thing at a time you dont need expensive tools and there a plenty of guides to help you build one like that.

[@Russxm]

@@asaltnado5168 oh get off your horse. Can't exactly build that in the parking lot of my one bedroom apartment complex can I. You cant even change you own oil here because its a breach of lease terms but I'm sure they wont mind me cutting and welding. Hence - "facilities".

[@smitty_1]

@@Russxm rent a garage. I use to rent 15x 25 u- store-it. Paid 50 a month and an extra 10 for 220 electric. Started collecting my Welders, tools, drill press, manual pipe bender and notcher, parts washer, engine stand and a hoist ect all in the one end. Was cramped for sure but warm and dry. I raced cra quads, bikes, built truggys, a cpl rock crawler buggies and restored a k5 blazer on 38's and a 68 nova in there. Find a buddy who's got a place to work and ready to go in on a build with ya. Not always easy to do but If there's a will there's a way. Wont happen on the couch. Remember.......Can't is the cancer of won't.

[@AlecC0l]

@@smitty_1 This inspired me thanks i got an 02 ranger 2wd don't know if imma go this hard lmfao

[@GrindhousePerformance]

Your video style gives me so many ideas, and I love the builds you come up with man. Keep it up!

[@jonlev5911]

This channel is by far the best for showing 10min builds. Great variety and quality work! Cheers brother 🤙🇦🇺

[@FreeJokesKoolMC]

Kick-ass, we need that type of mini truck here California...

[@zachneidl8832]

make sure you use good throw out bearings cause i did the clutch in my outback and im pretty sure the o’Reillys throw out bearing completely killed its self after 2 hours

[@evanlockard2073]

First song fits too well to the point it’s funny. “Do you think I’m crazy? I’ve done all this before!” Gingium be like, yeah, I have lol

[@Corvilux]

This is such a cool build man, congratulations! The amount of custom fab and dedication is incredible!

[@everettebrowder3344]

Absolutely awesome build, and mad respect for you doing what looks like 99% of the work yourself. Freaking awesome.

[@saltyarmysoldier2602]

Not only are these guys engineers and master fabricators, dude can drive the hell out of that beast.

[@animalistic_gamingv7395]

I’d buy this in a heartbeat if I could.. Edit: wow 34 likes I’ve never got that many before lol

[@chestercard3671]

This blew my mind , seriously a solid build . Would love a break down of all you did 👌🏾👌🏾

[@CHawkens]

@9:43 Your Left windshield wiper was so desperately trying to leave chat

[@thatvolvoguy6565]

Rims can change the entire look of a car omg

[@criscojesus4378]

Wheels*

[@vivostubes]

Please have someone give this guy free cars so he can modify them and we admire him!

[@jesusfreakshow98]

Just randomly found this video. What a sick build, man. I love this!

[@alexanderh8122]

One of the coolest builds on youtube By one of the coolest persons on youtube You really should use this kind of music more

me: has wheel hop me: *gets new shocks and springs* this guy: welp guess we gotta built a new suspension

[@rollin1869]

1k dislikes wtf this dude did a Build the right way and had the Smile of a 5 year old getting a toy when he first cranked it , this is a Genuine Kid with a Beautiful build.

[@justinlong977]

You should get custom plates that say “SIDSCMN”

[@danieldeutschen]

What a build, been lovin it since day 1. Also, great music in the beginning! Edit: Great music in the entire video!! :D

[@Henrique_Moura7]

name the song?

[@armandososa9453]

You are not a mechanic, you are an artist man!

[@scooterprint]

Dang, I wish I had the knowledge and ability to do something like this. looks like so much fun.

[@edwyn5442]

When this guy started working on cars a couple of years ago he hot glued wired together 😂

[@JustPasha]

Hell yeah!!!

[@RileyTheMonster299]

Sick Build I've been wanting to build a drift truck for a long time and you sir have made me believe it's a even better idea than I originally thought I bet that truck is so nice in a drift! Congratulations on your piece of art!

[@slimpmpn1]

Nice to see a younger cat doin somethin with his time and money.take note kids

[@onesound9344]

I've never seen a kid this young this bald. No offense, of course!

[@infidel900rr]

Awesome build, awesome engine choice, and good job putting an actual LSD instead of welding the diff. Very nice build, looks fun, respect!! 👍

[@michaeltapp7691]

Song? (The first one) edit: nvm I found it (Never Return by Sebastian Forslund in case anyone’s wondering)

[@adamcroteau8711]

OMG thank you so much👍

[@mariodibella7836]

Please name the second song. Tky

[@mariodibella7836]

kzbin.info/www/bejne/f2mXZ2Cvr9V4ZpI

[@killachops3]

A really well thought out build.... You make it look too easy! Love the way it looks to.... Understated but smart... 👍

[@Lol-iy8xr]

I wish I would’ve found your channel sooner, this is my first video I’ve watched and I’m already hooked!

[@CupraRoemu]

"That is really loud." Really?😂

[@mtsboatworx8288]

This made me extremely happy lol perhaps I should take a break from marine fab!

[@MrMeowmixcookies]

I love this dude, 10min of greatest ecstasy a human can watch

[@frenchtoad1308]

In before the millions of views

[@kodenarmstrong3114]

He had like 100k every vid a year or two ago now only around 50-60 thousand range EDIT: his most viewed videos have well into the millions as well which is great