Buy windshield here: amzn.to/2x5gfow Tools you need: #2 Phillips screwdriver - amzn.to/2wyGsdv 1/4 drive ratchet - amzn.to/2x5yFWm 1/4 drive 4mm allen socket - amzn.to/2eywHCq 1/4 drive 10mm socket - amzn.to/2eEidom If your rubber well nuts are broken - buy new kit here: amzn.to/2wCgIvs
@umaxen00484 жыл бұрын
When I watch his videos? I learn far more than when other mechanics attempt to explain something in "Grand Detail"... 👍
@mishkin315 жыл бұрын
You have hands of an artist. Soooo gentle and firm. Amazing punctuality. Amazing video.
@marquis384 жыл бұрын
True!
@pudealee14 жыл бұрын
I want to get a Burgman 400 just so I can use all your videos as a resource!
@leonardjessup29633 жыл бұрын
I have a new one and I love it! Power!
@peter76243 жыл бұрын
You certainly made it look easy Mitch. I spent almost a full day trying to fit the D266AF adjustable screen to my 2012 AF400ABS. I battled to get the Wellnuts seated where I wanted them. They were just too stiff and either wouldn't go in or slipped right through and disappeared! Got it done in the end though and it's a great screen, pretty much turbulence free. Thanks for posting the vid, it really helped.
@oooo-tu1sy Жыл бұрын
You sure made that look EASY
@slawomirczajkowski9481 Жыл бұрын
Fantastic. people speak but can not explain better. Very clear.
@MitchsScooterStuff Жыл бұрын
Many thanks!
@christschool6 жыл бұрын
You should do instruction videos for a living, this was excellent!
@iainamurray6 жыл бұрын
Great vid, thanks. I've recently bought a Burgman 650 with a Givi screen, which is immense up to about 50mph or thereabouts. Over 60mph the buffeting is awful. Any tricks or tips?
@chrisgorski16564 жыл бұрын
I just installed one. The Givi instructions were useless. Your instructions were perfect. Especially reusing the Suzuki phillips screws for the front two holes. I accidentally tried the Givi screws and pushed the rubber well nut right in past the windshield. Did not happen with Suzuki screws.
@Richard-wk9le5 жыл бұрын
Your Videos are simply outstanding I look forward to watching more of them
@motohq53415 жыл бұрын
Really helpful thanks, I would never have known how to remove that panel otherwise.
@jeffreyhurst95524 жыл бұрын
You make it look easy. I really fought with my Ermax Sportscreen install.
@kennyp111112 жыл бұрын
Thanks alot, my windscreen is on its way and this will be a big help. I noticed my rear plastics and the tailight are a little loose, do u have any videos on how to make it tighter.
@massimougolini87962 жыл бұрын
Hello Mitch, i wanted to know if the visibility is good and if there are not too many reflections inside the windshield, thank you for your beautiful and useful videos. greetings from italy
@johnmiglautsch45875 ай бұрын
Very helpful, but my dash cover was a bit more stuck than this one - probably not removed in 10+ years. Another video showed to pull with both hands on one side then move to the other side. That got me past the challenging spot.
@leonardjessup29633 жыл бұрын
Just put a new gifi w/s on my 2020 an400. Ten minutes. Wow. Thanks for your video.
@tony17112acst6 жыл бұрын
I used your video to install mine today ...THANK YOU!!!
@MitchsScooterStuff6 жыл бұрын
Awesome!! :)
@KnightsTemplar11184 жыл бұрын
After the panel is removed at the beginning, can you tell me the size of the two screws that need to be removed. I just noticed both mine are missing. Thank you.
@keith4usa14 жыл бұрын
MITCH IS BRILLIANT !!!!!!!!!!!!!!!!!!!!!!!
@craigjohnson8351 Жыл бұрын
Hey Mitch , my name is craig. I live in Grand Rapids, Michigan. It is so hard to find an extended windshield for 2007 Suzuki Bergman 400. Is this some way you can help me out? I'm watching your video trying to find out where I can possibly purchase one. We have a Fox motorsport. Shop here in Grand Rapids and that's the only one that can seem to order that particular windshield and it's no longer on the books. Can. You please help me??
@ColunadaMoto2 жыл бұрын
Hey there! Excellent video! Let me ask you something: the gray Burg has a sensacional headlight. Do you know where I can find it?
@MitchsScooterStuff2 жыл бұрын
Thank you! I got them installed years ago they are G2 projectors I got on eBay but you should go this way www.amazon.com/Upgraded-Headlight-Z-Shaped-Projector-Retrofits/dp/B08DFRJ77T/ref=mp_s_a_1_1_sspa?crid=17TAZGPWVV1YW&keywords=h4+led+projector&qid=1658127155&sprefix=h4+led+projector%2Caps%2C204&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExQkNNVFk0UVFTSkQmZW5jcnlwdGVkSWQ9QTA5MjI1NjMzQ1JZNE83WE1MRUFaJmVuY3J5cHRlZEFkSWQ9QTAzMzY1NTQxR0pSQzhIWVUxNjNNJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
@ColunadaMoto2 жыл бұрын
@@MitchsScooterStuff Thank you so much! I have several Burgmans but I just bought a 2016 and intend to start a project. Once again, thanks a bunch! Have a wonderful week! Best regards
@ColunadaMoto2 жыл бұрын
One last question: can I install the H4 in both sides? Need any adaptation?
@HerneIsTheGreenman Жыл бұрын
Thanks so much for the tuition video fabulous! 🤘🏻
@adrianenache58704 жыл бұрын
Hy. Can tou tell my hiw long the screws are? As i both my givi sh and i have no long screws . The original ones are to short thanks. Adrian
@10melah54 жыл бұрын
Definitely order a new set of the rubber well nuts - ebay or amazon under "motorcycle windshield bolts". You'd think Givi would throw some in there
@PoolandBilliards5 жыл бұрын
This was a great help. However, having just done this I would change a few steps: 1. When removing the rubber grommets, they push all the way through the metal hole almost effortlessly. No need to wrestle them out backwards. 2. I would not attach the metal support to the windshield ahead of time. 3. I would re-install the upper 2 rubber grommets on each side ahead of time through the support bars from #2. That is, before starting to install the window with the lower grommets on each side, I would pre-load the upper 2 grommets on each side THROUGH the metal support bars onto the frame. There is hardly any room once the lower screws are in and the rubber would end up between the metal and the windshield to function as a rubber gasket. It will attach to the windshield later just fine.
@vinsonwalton283 жыл бұрын
Do i need the hardware kit they sell D266Kit? Or can I just use old hardware?
@williecoleman7196 Жыл бұрын
Did you need the hardware kit?
@TheDeScore3 жыл бұрын
Nice work, thx for the manual!
@1rankram2 жыл бұрын
No need or reason to remove the 4 rearward wellnuts. Only the front 2 need be removed and if on an older unit i recommend getting new ones before doing this replacement as they get so hard that there is no way to get them back in without ruining them in due to the hardness and size of the crush rib in the rubber over the years.
@MathieuTechMoto5 ай бұрын
Superb video !
@magvel001 Жыл бұрын
Parabéns pelos seus vídeos
@abnerbjorn11067 жыл бұрын
Great video Mitch. Did you buy the extra fit kit?
@MitchsScooterStuff7 жыл бұрын
Thanks Abner! No, everything in the bag with the windshield ready to install right away :)
@DrAgon-LS862 жыл бұрын
Good instruction. Thanks 🤝
@stefankosubek62653 жыл бұрын
Well done !!! Very good !!!
@markr.15846 жыл бұрын
Great video. Very helpful.
@MitchsScooterStuff6 жыл бұрын
Thank you!
@vinsonwalton283 жыл бұрын
Mitch is my bro
@MitchsScooterStuff3 жыл бұрын
🤙🏼🤙🏼
@mladen77petrovic6 жыл бұрын
How is in ride with this new windshield?
@MitchsScooterStuff6 жыл бұрын
He loves it! I have mine since 2009, it keeps wind off on my face. When I was riding for hours on freeway my neck was little sore with stock windshield ... so I switched to tall one and no more sore neck from wind hitting on my helmet
@mladen77petrovic6 жыл бұрын
Mitch's Scooter Stuff Exactly same problem. Thank you for answer