How To Set Up a Harbor Freight Paint Gun

[@draytonPW]

Professional painters are awesome. I am really glad you guys are supporting all of us who just want to paint some parts without dropping a lot of cash on a professional grade gun. Thanks for the vid!

[@gixerman01]

Thanks for watching.

[@4rdF1Hunny]

I’ll second this!

[@leafybug04]

Lemme third it

[@jamerolkg]

I forth that💯✊🏾. I feel the same way. I’m pretty savvy when it comes to some things and I want to paint my rims on my car.. I just don’t see myself dropping $400 $500 or , especially on Stock rims. I think they should get the job done along with painting some furniture around the house. Thanks for the video.💯✊🏾

[@rfletch62]

9 minute video covers more and better (puns intended) than other 45 minute paint videos. THAT'S a time saver!

[@annagraham6204]

That’s because more than half the time you’re really watching an infomercial. “As seen on 📺🚫KZbin”.

[@socalRooster]

Wow you explained more in 8 minutes then paint guy at store showed me ...thanks

[@tomstuart2652]

The best combination of advice: simple, complete, and to the point. I have a new HF purple gun. My first project was to refinish some outdoor furniture. I figured a mistake or so here wouldn’t matter. My wife was out for a few hours and when she returned she was amazed at the new chairs and table ready for summer BBQs. Good gun and great explanation.

[@145tak]

I keep coming back to this video each time I need to paint. My kitchen cabinets look like they came with a factory finish. Thanks!

[@maurylee5239]

My wife wanted some registers painted. Saw this video and bought the cheap purple gun. Didn't have to read the instructions as this video was worth a thousand words. Sprayed the registers. My wife liked it so much she wants me to do all of them. Whoops, it worked too well. Great job on the video. Thanks for sharing. Made my day.

[@gixerman01]

Thanks for watching.

[@chasechevy8933]

I got this gun too for a one time deal and was very impressed too. Shot base, pearl and clear like a champ 👍 Great vid

[@catolicomochaorejas9073]

I'm a professional painter for 15 years. I remember when i use this gun 15 years ago and tomorrow I'm going to buy two... They work pretty good... Thanks for the video, brings old memories

[@gixerman01]

Thanks for watching

[@CostaAzulFishingDanielGarza]

Can I use this gun to paint my exterior house. I have a lot to paint and I’m doing it alone.

[@DaveyBlue32]

@@CostaAzulFishingDanielGarza you don’t want that cup gun buddy… for less then $200 you can get a 5 gallon pal pump spray rig at harbor freight and then you can get a 3’ extension gun… a big metal trowel and cardboard for the edges and go to town! It’s all in the prep work so make sure that you have got the prep done then it’s just a couple hours to spray the whole thing!

[@kevkfz5226]

Thanks mate, greati nformaton. Sick of the proffesional players giving out bad information for cheap guns. I know my gun is crap, just help me get the best out of it I can!

[@gixerman01]

This video is for the guy just starting out. This gun can give good results with a little practice and some tips and tricks. Thanks for watching.

[@f3irty278]

That fan setup tip about watching til it just changes in size is amazing, thanks man! I was one of the dummies with it wide open!

[@gixerman01]

Thanks for watching!

[@JoeAIdar]

I' impressed not only by your knowledge , but also by how well organized your garage is. My wife can't stand to see an open space in mine without taking it over with her stuff

[@gixerman01]

Thanks and thanks for watching.

[@salestowelpros4691]

My paint guy disappeared. Restoring a '66 Bug and going with original paint. I stripped fenders, lid, hood, etc. and now he stopped responding. Looks like I'm going to attempt this. LOL Loved the explanation- clear and concise. Thanks!

[@gixerman01]

Thanks for watching

[@petesmith9472]

at last...simple, straight to the point. Learned more about principles in a couple of minutes than the last hour I've spent looking. Thank you!

[@gixerman01]

Thanks for watching.

[@shannadressler]

Just bought this and was feeling dumb that it wasn't spraying the way I needed it to. Thanks for showing me my mistake!

[@hiddenstoneranch3871]

This video is exactly what I needed to get started on my first project. Thank you!

[@scottleppard3290]

Great job explaining this stuff to a newbie like me, thanx GSX-R

[@southernstar4353]

Just bought that exact gun on sale for $10 to paint a dresser for my wife. Thanks for the video man, was great, subbed.

[@BackwudzCountryboy]

As a total amateur I reference this video every time I am going to break out the sprayer... and every time, Quick Simple and to the point! Thank you!

[@gixerman01]

Thanks for watching.

[@Scbrodbeck100]

Great job! Greatly appreciate the video!!! Keep up the good work, and thank you for helping us DIY guys! Was quoted $1,100 to repaint camper shell 🙄. $267 all said and done, very happy with the outcome!!

[@gixerman01]

Thanks for watching. Glad you found it helpful!

[@Zach-bd3ul]

Same gun and wanting to use minimal paint to cover a lot of parts??

[@BigEdd420]

I bought 1 a couple years ago just because it was so cheap. Ive never ran a spray gun in my 55 years. Bought myself a 68 Ford truck as a project. Time to put that gun to use. Perfect video for me. Thanks for the info.

[@fishingismydrug1]

Simple, straight to the point! Thank you very much!! I have a boat and trailer to redo, and a couple spots on a car. You just gave me the courage to buy the gun and tackle it!

[@gixerman01]

Good luck thanks for watching.

[@catfishguy3822]

Thank you for being so detailed and starting from scratch for the true rookies watching!

[@jeremym830]

Haven't used a paint gun in over 10 years! Video refreshed my memory a little! Gonna be primering and final coating a Camaro Engine Bay! I can't go into this part of the project looking dumb in front of my kid! Lol

[@bandlessone]

So how did it turn out?

[@connorshaffer7009]

wow, thank you I learned more in this 8min video then all the others combined

[@gixerman01]

Connor Shaffer thanks for watching

[@AnthonyTackett]

Agreed. Very helpful. Thanks @gixerman01

[@josecollazos6]

gixerman01 hi I’m looking at buying this gun what type of air compressor can i use for it i have a 33 gallon craftsman’s 1.7hp can you please help me thank you. Do you have a FB or IG where i can follow

[@gixerman01]

Jose Collazos I don’t have a Facebook for my KZbin channel. You can use that compressor. It may have issue keeping up if you spray large parts. Just pause and let it catch up and continue if that happens. Thanks for watching.

[@timbowles6]

Agree with the OP, thanks for sharing

[@tjmadden4688]

I bought this gun to paint some cabinets. Haven’t used a HVLP since high school in auto body class. I was so intimidated even scared, to use the gun. So I pulled out the airless sprayer it used way to much paint. Now I feel confident that I can use it. Thanks for the info.

[@andrestamayo6509]

Been painting professionally for 15 years now(I restore construction equipment), and...those guns..are the ONLY ones that I use now. I have found, the better the paint...the better the finish. I've done 11 Bobcats(White, black and orange) with one gun. I've even stretched some to 18 projects. My customers love the results. Just make sure to keep the gun clean, especially the front nozzle. make sure to soak it in acetone, then, with a very fine wire...clean the time holes in the center.

[@solohour]

I have that gun, and it was completely set up wrong for the primer I just shot. It was too thin...and I didn't have an air regulator on it. Back to the drawing board tomorrow! Awesome video, thanks. .

[@JustAGuy781]

One of the best and most informative video on this gun yet. Thanks bro

[@gixerman01]

Thanks for watching!

[@paulastrickland2259]

I bought this gun.Thank you for this set up video. I intend to paint furniture

[@zakaroonetwork777]

First thing to do is Clean the gun with Acetone to remove manufacturing grease.

[@USCG.Brennan]

Lacquer thinner works great too for cleaning.....

[@roadstar499]

yes it needs to be taken appart and cleaned...he missed a lot of important tips... thats why when i learned i watched several videos on painting ... even today i watched a great video which should help me get better results ona job i need to do this week.

[@funnymoney6969]

That’s awesome! There’s people that can do. There’s people that can teach. Then there’s few people that can do and teach.

[@smoky5833]

This was a great tutorial, short and informative. I don’t use a sprayer often, and have produced some excellent finishes. But since I don’t do it often it takes time to learn how to do it all over again. Your video makes that beginning learning curve non existence. Thanks Brother, good job!

[@gixerman01]

Thanks for watching. I’m the same way I don’t spray much at home, so about the time I’m dialed in I’m done! 😀

[@re_styles]

Dude we need to do a TV spray painting show. Nice. Direct and to the point.

[@kevkev5935]

This is an awesome video. Your advice on how to fix the uneven spray patterns is invaluable.

[@Kyle_Nelson]

Straight to the point, no filler bs.. thanks!

[@missk6070]

Great video! Thank you, this is my first time using one. Got her for $9.99, looking forward to finishing some furniture flips 😁

[@theghostslab]

Holy baby Jesus Christ this is the best demonstration/guide on how to set up a spray gun. Literally copy and paste in terms of adjusting and test/fine tuning before actually doing paint itself.

[@gixerman01]

Thanks for watching.

[@RickaramaTrama-lc1ys]

Thanks for straight forward explanation and I saved it to my "How To" videos~!

[@countrymagic61]

I just bought this purple gun about a month ago or so. Finally got to use it for the first time this past weekend. And I can tell you.....I don't know what I'm doing (misplaced the manual). I had problems spraying paint. I played with the knobs and air pressure ( I have a pressure gauge and moisture filter attached). Now I know how to set the gun up to a basic starting point and know what the knobs do. Thank you for the instructional video. It helped out a great deal. The major issue while I was trying to paint (other than me, operator error), was the paint. I went straight from the can to the sprayer (Rust-Oleum Professional Smoke Gray Gloss Oil-based Enamel Interior/Exterior Paint ). I did not thin out the paint. Was not getting a spray pattern. It was coming out with splatter droplets. So, with this video and thin out the pain, I think I will do better next time. As far as thinning paint.....how thin? I heard to thin out paint to the consistency of milk. OK. 1%, 2%, or whole milk? any advice?

[@gixerman01]

Ok I would use a viscosity cup. You can buy one on amazon. 20-24 sec on an ez zahn 2. Or you can start off by thinning by 25%. 3 parts paint 1 part solvent. Then spray a test piece. If it still sprays dry increase the solvent. Also make sure you pull out the filter from the cup. ( I would do that first) use a filter when you pour in the cup. I have a video where I paint some wheels check it out. Thanks for watching.

[@mathuetax]

Thanks for making this. I've been looking at that very gun. I have extensive experience with air brushes but this was quite helpful. I'm considering doing some paintwork on my rough looking car. I know with my biggest airbrush I could do the work, but it'd take a long time and since I don't have that amount of free time I'm looking at something bigger.

[@gixerman01]

Good luck thanks for watching.

[@cookinitmax]

Hi I got one just yesterday boy what a difference. I used it to paint door jams and cabinets you do have to thin paint I used a oil based primer for the underside and will mess with the top coat on a later day . Over all you really can't beat the price.

[@frescali3030]

Most importantly clean all of the oil out of the gun with acetone before using these come loaded with oil everywhere disassemble and clean good if not you’re looking for problems

[@WAHDEEDOWthe2]

Fres Cali how do you do this?

[@RickaramaTrama-lc1ys]

won't acetone eat all the seals and paint off the gun???

[@testticklehead]

@@RickaramaTrama-lc1ys Use an old toothbrush, dip it in acetone, and only clean the internal metal parts. Do a search, there are a lot of videos that show disassembly and what parts to clean. Once its clean this spray gun is amazing. Good luck and happy spraying!

[@rogermccaslin6750]

@@RickaramaTrama-lc1ys I used to have one of these guns and I used acetone for cleaning after spraying polyester primer through it. Acetone won't be a problem in the fluid section of this gun. The cup is a plastic that isn't affected by acetone. Everthing else is metal except the needle seal which is teflon. Just put acetone in the cup and run it through the gun. The gun body is anodized aluminum and that's not affected by acetone so you can wipe the gun down with it if you wish.

[@jW-A-hj1vk]

Thank you for a straightforward explanation and demonstration. It really helps to see the impact of the adjustments on the spray pattern.

[@at8504]

Youre the best paper towel water painter ever.

[@gixerman01]

Abe T. Why thank you I sure try! LOL thanks for watching

[@MizTori]

Thanks for this. I’m only painting my own car with single stage paint. I bought this gun to learn on.

[@ATfabNfix64]

These guns are great for primer and cheap paint.$9.99 can’t go wrong

[@DaveW_googleplus]

Thank you. I was just given one of these guns and have never used a paint gun before.

[@jimwilson946]

I've looked all over KZbin for a video on setting up this paint gun and got nowhere until I found yours! Now I feel confident in using it. Thank great video. Ps. Does Harbor Freight have a manual on line as here in the UK all I can get is a mangled Chinglish version.

[@toddfrisch737]

Thanks for the info. I’m a new painter with no help but for you guys on KZbin

[@RGD1982]

What will also help with seeing a fan with water put some food coloring in the water

[@austincrs]

Genius

[@GodsGenuineGrace]

Great idea🙌🏽🙌🏽🙌🏽❗️

[@scottleppard3290]

Tried it today just as you instructed. Perfect! Pushing interior latex without thinning. For 15 bucks, Wow!

[@c50ge]

What are you painting?

[@JamesSmith-lt5zz]

If you get the automotive two gun kit for 49.99 the one large gun is a devilbiss starting line gun. Same fluid and air cap and parts interchange. If someone wanted to save half the price

[@UcantBeSerious03]

They have 3 different part numbers, probably from different manufacture plants - which one? part numbers listed on HF are: 60239 94572 61472

[@USCG.Brennan]

Thanks for the tip!!

[@Rickster208]

Yeah, I’m a new guy. Thanks for the vid. I purchased that very spray gun today for painting my bike. Thanks.

[@saulbasua8152]

Hey man! I really appreciate your time and I like to a ask, some about cleaning the gun, if you have any tips or the right way to clean a paint gun?

[@gixerman01]

Saul Basua best thing to do is run some lacquer thinner thru it pull the air cap. fluid tip and needle and wipe them down with some thinner. Then put it back together and flush again with clean thinner. I usually leave some thinner in my gun and store my air cap in it. This makes sure no residue will set up if you didn’t get it clean. I store mine hanging up and I use them quite often. If yours will not be used very often then you may just want to flush with solvent till it’s empty and store it dry. Thanks for watching.

[@kountrikuztoms3438]

Spray lacquer thinner thru it or buy an expensive gun cleaning machine

[@michaeln7311]

You not just saved me money, but you will help me to make money and provide customers with a great paint job. I have been using Gracos for years. I still will use Graco, but for a 2nd paint sprayer, I will be purchasing this type. Your video is appreciated

[@justustx6996]

you gave me a great idea to clean my garage w/ my harbor freight paint gun.....just might have to add a bit of soap

[@gixerman01]

JustUs TX well not sure how well that will work but you can give it a shot! LOL Thanks for watching.

[@ForwardEngineering]

Your looking for something called a pressure washer. lol

[@SolidSleds]

Thank you for this tip video. I am one of the new guys to true paint guns. I bought two purple and one green gun from HF and wasn't sure how to get the right pattern set. Awesome instructional video, can't wait to watch more of your vids!.

[@mauricediggs8040]

Man this guy is amazing

[@mikiejohnson7118]

I just bought that exact same kind of airbrushing paint spray gun along with an AVANTI airbrush compressor combo kit, an extra back-up airbrushing spray paint hose, & a two year return plan on all of the stuff at harbor freight in Lafayette Indiana not too far back. These are also my very first ones that I own because I've never done spray painting before even though I've always loved art & have been interested & fasinated in this type of stuff. I have an uncle who used to do automotive body painting on cars & other vehicles & what he told me about this kind of equipment goes in harmony with what you are showing. I appreciate how straight forward & honest this is. Keep it up 🙂👍👍🔫🎨. I just subscribed to your channel & I look forward to seeing more videos & thank you 😊. Go get em 👍👍🔫🎨.

[@gixerman01]

Thanks for watching and good luck with your projects

[@mikiejohnson7118]

@@gixerman01 thank you 😊♥️👍👍🔫🎨

[@timc8913]

Thanks for sharing your knowledge & experience with us who aren't professional painters and only paint in the garage from time to time.

[@ibast1]

I think "flud" means fluid. Good vid, but I must say you professional guys always set up your guns very wet, so you can work fast. I think for amateurs it's better to set up a bit leaner on the flud ;) and maybe a bit narrower on the fan and then work a bit slower with more passes. What do you think?

[@jschlierf1323]

Awesome. Got an hvlp for Christmas. Haven't used it yet cuz I didn't feel comfortable to start. Watched a couple of videos that were easy to technical and kinda scared me away from it. But you definitely dumbed it down enough for my dumb a__. Using with it with water first is a great idea and it helped break into it and not feel anxious.

[@USFmarine]

"flid delivery" = fluid delivery, right? Great video.

[@gixerman01]

Yes fluid delivery. Thanks for watching

[@jerrypolen1248]

Great video i changed my air fittings to high volume and only use the regulator on the wall works a lot better

[@40mick]

The only thing to mention is the gun needs to be cleaned prior to painting. It has a lot of oil and debris from manufacturing. Other than that, excellent video!!!!!!!!

[@gixerman01]

40mick I always run some solvent thru my guns before shooting any thing. Thanks for watching..

[@gixerman01]

anonymous lacquer thinner is good to use.

[@gixerman01]

anonymous if you paint a car you going to need larger air compressor. This gun requires a minimum of 6 cfm at 40 psi. You would be better off to get something bigger than that.

[@gixerman01]

anonymous 6 cfm at 40psi is what the gun called for, but Before I went out and bought an air compressor I would do a little research on what you needs may be later with other tools you may need. Air tools for body work are usually air hogs and require quite a bit of air. Look into the requirements of other tools you may need later first.

[@gixerman01]

anonymous for painting at least 6 cfm at 40 psi and a 30 gallon tank. Hope that helps.

[@mrjimshotrodbarn1686]

Used this gun to paint rustoleum thinned w mineral spirits .looks real good for a cheapo . I like the gun and the price. Not bad at all. Painted my old volvo .

[@carlocornelius8460]

Do you have a video on how to properly clean the gun after painting?

[@gixerman01]

In my last video on panting motorcycle wheels I talk about it briefly. Thanks for watching.

[@shanepiwonka7270]

Great video with nice explanations. Bought one yesterday, and it was a real piece, only would flow 4 oz of water max and was leaking from the flow needle before I could even use it. Now 50 miles to the nearest harbour freight, just about my luck.

[@mrcokez1]

the ones that complain about this HVLP gun are the exact same ones who don't know how to fine tune their fan pattern.

[@ganeshnarayan5505]

Thanks brother for this video i bought this paint gun to paint my 97 Camry i hope it turns out good. Never painted a car before good luck to me.

[@WinningTrades4U]

Flidddd deliverwy 🤣😂

[@dodgeramsport01]

I have been running my shop with this same gun for years, base and clear most of the time I spray with this but i do prefer a larger tip for clear!

[@gixerman01]

Thanks for the input and for watching!

[@jesserasso1042]

You have to clean those guns rite out of the box cause of dabre and the oil they put on those from the factory I always take the whole gun apart

[@wwmilanl]

This is the first video that really explains in a plain and simple way how to set up the GUN, great job, thanks for your video really informative and to the point. Great, BTW i purchase the same gun for 19 US$ using the coupons.

[@gixerman01]

Thanks for watching.

[@ICU2HI]

Thank you for posting this.

[@gixerman01]

Thanks for watching.

[@ricanryker6441]

Thanks as a 1st time user you helped me out alot , now I can spray my canvases black in no time with perfect application for airbrushing 😆👍🏾

[@steveglass7009]

Thank you! This was great!

[@G.I.JeffsWorkbench]

Very helpful vid. This will let me get more out of this gun that was right for my needs. I appreciate the links for inexpensive accessories that will maximize the performance and results from this tool.

[@matt82654]

A great Vid! Where did you get the separator and gauge?

[@gixerman01]

Harbor freight, thanks for watching!

[@whoisryan6680]

One of the few videos that are straight to the point!! Awesome content sir. 👍

[@drewt1081]

It’s $8.99 with coupon this weekend!

[@gixerman01]

I have bought a few with the coupon. Thanks for watching

[@tinadogmom8586]

Thank you so much for getting me started. I'm sure I may have questions but you gave me enough to get started. Great video

[@jakeclauson9863]

40-50 psi is way too much if your spraying automotive paint. 30 psi is probably the most you would want to spray at, maybe even less

[@sonnybee8271]

is there something wrong with my pressure reg.at the gun working properly/?It goes to 0- 40psi ,no inbetween unless I lower it T THE COMPRESSOR?

[@jakeclauson9863]

@@sonnybee8271 iv used the hf gun with no regulator at the psi coming out of the compressor, and it came out perfect. It also used way more paint then it would at the proper psi. But if you got extra paint to waste then so be it. But if your trying to be as efficient as you can, which a DIYer should want to do, then you should spray at the proper psi. If a panel only requires 2 oz why use 5 oz to get the job done? Or if the guy selling you the paint says 2 oz will be more then enough and you go home with 2 oz but your gun isnt set up right so it blows thru that 2 oz before the job is done.. but like I said if you got paint/money to burn sand that's the only way you know then that's fine. But you doing a disservice to everyone trying to learn by watching this

[@SwayPromo]

Jake Clauson I’m buying this gun tomorrow to do my entire truck. What psi do I need to run my gun at and what size compressor do I need? I’ve heard anything from 20 gallon to 60.

[@maureenpolczynski1194]

Thanks for making this video. A. good start. Would have preferred seeing this demo with paint. But, it gives me a great start. Time to play with it!!

[@Efra-tesa0818]

I started my body shop with 500 dllrs on tools from HF 14 yrs ago now im working for somebody else's!!. 😂😂

[@cal638]

I know several shop owners that use hf tools withouth a prob

[@harryl8234]

So, in other words you gave some shity paint job on your customer's cars. 🤣🤣🤣

[@cal638]

@@harryl8234what!! all stores and brands have good and crap tools, and Ill admit that most snapon tools I own is topnotch but there is other brands that perform at the same level while being less expensive...I own all kinds of tool brands snapon, dewalt, milwakee, potercable, harbor freigth, made in China, home made, yard sale and alot of new companies with diff names....and as long as u pick the rigth tool and have the correct setup they all perform with great results...my large compressor potercable frm tractor supply, that same compressor home depot and lowes sells just different brand n paintjob(lowes has is as kobalt and homedepot as dewalt) and in this case its the exact same compressor all 3 of them say made in Mexico on the motor and Made in U.S.A on the tank....my older dewalt battery impact says made in Mexico my newr dewalt impact says made in China....my made in China diagnostic tablet scanner tat cost me 3k outperforms the namebrand scanners

[@HiddenRamza]

Great video brother. I will be painting for the first time ever and out of the 30 ++ videos in the past 2 days on youtube I have watched yours was the only one that showed how to actually tune it and the watch out for, so far with a actual learning demonstration, Not the watch me paint and I tell ya how much they all suck unless you my expensive one which still don't explain the setup up. 1.3, 1.4 tip, open full, use regulator 30 to 40 psi does not explain what the hell I should be looking out for. Again thank you very much for a actual How to

[@gixerman01]

Glad it helped

[@vox1966]

Just don’t buy the small gun for small touch up it comes with a aluminum bowl that won’t stay upwards and the trigger shaft nut leaks bad if you try and tighten it will snap buy a Home Depot Husky better quality

[@chrismcmurray8140]

I have never had an issue with this paint gun....and have used it many times! I would recommend it to anyone

[@billgorson7967]

Thanks for the video, if you get one of these guns clean it thoroughly, there is a ton of manufacturer grease on them. It's in the instructions but just wanted to make this point so you don't ruin your paint.

[@matgarcia7720]

Every body will get offended when I say "your"

[@gixerman01]

mat garcia I you can say your but I think you have to spell it you’re. LOL thanks for watching

[@Nusremmus]

Perfect! No B.S. and straight to the point

[@SuperTruckerdan]

Just wanted to say thanks for the great tutorial. I’m an absolute beginner getting ready to paint the frame on my Flatbed trailer.

[@gixerman01]

Thanks for the comment and watching

[@aaronpollack8832]

Thank You. I have a ways to go before I feel confident enough to try painting. But that's okay because I still have a lot of body work to do first. I figure now is probably the time for me to learn.

[@davidflaa2730]

I am about to clear coat a guitar, and I have the same purple HVLP gun. I agree with the other comments that this covers the “how to” better than any others I have found. Congratulations...

[@gixerman01]

Thanks for watching.

[@snoopu2601]

I bought a harbor freight paint gun to paint my truck dash with rustolum black paint. I've taken it to car shows and no one knew I used a cheaper spray gun and shot rustolum paint. I would use it for many thing's to paint never a car only because I don't know how or never have. Painted a hood for this elderly woman with white paint it came out better than I thought I would have done it.

[@gixerman01]

A little practice and this gun will work well at many projects. Glad it worked well for you.

[@jairosanchez07]

Just what I needed after I ruined my first spray gun! Thank you!

[@Jeff-qq1tz]

This is one of the best explanation videos I’ve ever seen. Thank you for taking the time to make it.

[@gixerman01]

Thanks for watching.

[@stevenbrown592]

Very good explanation. Thanks for putting it all in language I could understand. You are a good instructor 👍

[@PauloCorreaTCI]

Thanks for the tips. I have one but never got to use. I will give a shot this weekend. Cheers

[@maxfreeland9050]

pretty stick and thanks for the tips HB needs send you all those coupon they stopped supplying us

[@artireyes]

very good video. straight to the point. no time wasted.

[@gixerman01]

Thanks for watching