Glass Etching and Engraving with a CO2 Laser - Aeon Mira Pro 7

Engraving or Etching glass is a very easy and fast process. Georges shows how he did it including screen captures of the Lightburn Setting at the end of the video. Can you make money with an Aeon CO2 Laser?
Here are the promised information from the video.
After this video was produced George became a partner for Aeon Laser. If you purchase an AEON Laser and mention George he could receive a small commission. The Details of the Aeon Partner Program are posted at their website. Here is Georges partner Link into the Aeon Site
aeonlaser.us/c...
George's e mail g.kenner @ Yahoo.com
George's Amazon store for supplies. Coins and the Book "Law of Success"
Https://Amazon.com/sho...
Along with being a Broker George has also been recipient of Realtor of the Year honors and California Association of Realtors, Champion of Home Award. You can see a short video that details why George was given these honors at .
• George Kenner, Recipie...
George also contributes his video skills to charities and his local Realtor Association and will consider working for free for any charity. If you have a video project to discuss with George please do not hesitate to call him at 619-723-5714

[@TK-rx5dp]

Yes, a fiber laser would be great. Something about engraving metals puts a smile on my face.

[@GeorgeKennerLaser]

I am excited about it.

[@karwanduski4061]

​@@GeorgeKennerLaser 🎉🎉 قصدي

[@sniderswoodworking]

Have you shared your settings for the glass ? Looking for some starter settings. Also did you de-focus? or use autofocus?

[@thebosun181]

Great info as always. Thank you again!

[@GeorgeKennerLaser]

have a few more in the works... thank you for always being so nice. Cheers.

[@livingmytruth90]

Thanks for sharing your ideas, tips and tricks!

[@GeorgeKennerLaser]

you are most welcome... if you use Facebook come and join Laser Freedom... It is no BRAND affiliation and you can say what you want.

[@hpdesign.shoptx]

Way to go! Love it!

[@GeorgeKennerLaser]

Thank you!!

[@theINNERWORKstudio]

Your glasses here are beautiful and I love all of your creative ideas! I am curious if the Aeon 7 can do deeply engraved writing....more than the etching? Do you know hat type of laser is required for deepe engraving? I do it by hand now, but would love to automate!

[@theINNERWORKstudio]

I should have made it clear I am interested in glass engraving. :)

[@GeorgeKennerLaser]

Carrie... the laser will go deeper if you do more passes. I have seen some thick bottles that have even been filled with paint and wiped off.. But really the thing to do is get ahold of Elisha at AEON she will not want you to buy a machine that will not meet your needs. Right tool for the job! Thank you for the very nice comment. If you have more detailed questions PLEASE feel free to e mail me. But I am telling you I love my MIRA!

[@bigfranksworld]

Came here for the glass etching. Got what felt like a timeshare sale for a laser. Good info, but not what I watched for.

[@GeorgeKennerLaser]

Come into Laser Freedom In Facebook and ask any questions you may have. I will give you all the information I have and if I dont know I will try and find it or send you to the right place for the inform. Please feel free to e mail me at G . Kenner @ yahoo . Com Do not forget the period after the G. Cheer and thank you for the comment.

[@Ianmalcolmcarter]

Hi George, Just upgraded from XTOOL D1 Pro 20W as I am taking far too long to paint glass with Tempura Paint. Im in the UK and have purchased an OMTECH 50W after considering the Aeon Mira 5. The UK supplier was very slow in responding and the Mira 5 actually costs more than 3 times the OMTECH so as much as I liked the inbuilt water tank and compact design I struggled to justify the cost considering slow response from supplier. Im testing right now with glass and i hoped your settings (although 60W) might offer some level of guidance as I am quite proficient now with Lightburn having learnt over the past 12 months with my Xtool. Could I burden you to share the settings with me as the video image of your Lightburn settings are out of focus. I fear i am testing at to higher speed and power. Keep up your great guidance as Ive subscribed with you for 12 months now. X

[@GeorgeKennerLaser]

the wattage of the omtech will matter. I am away from my lightburn program to get the setting, and the lens distance could matter. Here is what I would do to get the right setting as soon as possible go into the Omtech Facebook page and ask, giving your model also. CHEERS and congrats on the NEW TOOL...

[@laseroflovecreations]

Happy to follow another laser enthusiast. I too have the Mira 7 and am in love with it. I would love to know what that glass did with the scripture verse.

[@GeorgeKennerLaser]

Just like you I enjoy following others who are doing the same thing I am, I will be looking for your content, I SIGNED UP!... The "verse" was not really a verse it was a LOGIC.. it said I believe in God, So I follow the Golden RULE.. if you want a picture of it let me know in e mail and I will send you one. The "verse" is part one of a two sided coin that I want to make... Yea, I am not very smart I will spend thousand of dollars to buy a laser to make a coin... FIBER LASER here I come. Cheers and Happy New Year.

[@laseroflovecreations]

@@GeorgeKennerLaser I thank you so much. Loved that you “signed up”. I will look for your email and send you one 😉. Happy New Year and new laser to you. 💥

[@rodneymaker6689]

Hi George, where do you get your plywood?

[@GeorgeKennerLaser]

I got that plywood at WoodCraftersSourse.com in Tempe Arizona. I also have a CNC and I go there to get exotic woods. It was some really clean stuff in a 4 by 8 sheet and I had them cut it down to my bed size. Cheers and Happy New Year.

[@rookieallen8439]

What machine would you recommend for business cards engraving? (large scale engraving hundreds a week)

[@GeorgeKennerLaser]

Well, that is a hard question. I of course would go with a "small head machine" for speed, all Aeon machines are small head. I am doing a 6 month review on my Mira right now and I will talk about this in that video. Small Head moves faster thus less machine time. Time is money. I was going to buy an Aeon Nova but got the Mira as it would do all I wanted it to do for less money. Alisha from Aeon did not try and upsell me. In fact I saved money which I will use for a Fiber Laser in the near future.

[@rookieallen8439]

@@GeorgeKennerLaser the Mira is co2 right? How fast can you do engraving on metal compared to a fiber? My co2 glowforge takes 9 minutes per side :/

[@GDISinc]

So no more XTool D1 Pro?

[@GeorgeKennerLaser]

No I still have my Xtool D1 and love it, more content on that in the near future. But the CO2 is just so much faster. I want to outfit the shop with all the types. I learn one and then there is another to learn, all centered on LIGHTBURN. This is truly a hobby everyone can get involved in. Lasers are like paint brushes to me. Right brush for the JOB?

[@GDISinc]

@@GeorgeKennerLaser Na your done why would ever go back to xtool when you have CO2. Faster and better all the way around! Thanks for the XTool videos good luck!!

[@GeorgeKennerLaser]

@@GDISinc honestly I am not done.... I want to stay with all the lasers. The D1 was my starting point in this hobby, and I will not forget that . I even have the new RED D1. You will see more in a few weeks.

[@drood78]

Ad disguised as an video. you're getting paid

[@GeorgeKennerLaser]

I do not pull comments... But at the time I did this video I was not being paid by anyone. As my channel has grown I get more and more attention from manufactures. I have a rule if the product is LOUSY.. I just sent it back. There is one video I did for a diode laser that was NOT GOOD... I did not mention their name. Seeing how fast I learned how to use a CO2 laser to me was important. If I can inspire someone to get out of their lazy chair and do something I will. If I sounded like and advertisement and you were disappointed in what I shared I am sorry. Utmost Respect, George Kenner