Glasurit 923-447 problem. 2 hours after polishing it’s still soft!! Same as ppg 8122

[@themechanicman3865]

Depending on how many coach that you put on and what kind of hardeners you used and the environment you sprayed in all plays a big factor remember chemicals have reactions I have had some paint jobs come out good and I've had others they give me a lot of problems when you stick with using the same methods tried-and-true you should get the same results but when you're indifferent working environments different temperatures that makes a big problem to I have a shot glass or rats I think the 923 6 something I have to look again but I believe it is you have to reduce it yourself and I barely reduce that I shot it straight out of the can I got a few runs but man when I cut and rub that stuff it shine like glass an easy to get the runs out two I think I was paying close to three or four hundred for the kit now it's like five or six this was back couple years ago already I'm going to be getting the same clear the hundred-dollar a bottle stuff is okay too but when you want something to look right when you want something hold out with no diaper bag go with the glass ornaments I don't know what-all ones are good I know the 9 series 620 something is good good luck

[@timdeakin2524]

I’ve always been a stickler for following the tds etc. this is an old video now. We noticed that the scratch resistant clears tend to loose some of their hardness once polished, it’s almost like the top layer is the hard bit and you run the risk of it being polished off. But, eventually is goes as hard as nails

[@aljazeeraautocaregaragebod347]

This is not a problem, the product is smooth because it absorbs scratches and then self-processes the scratches

[@aljazeeraautocaregaragebod347]

When exposing this product to hot air or the heat of sunlight, the product will self-treat the scratches

[@Carbodon69]

I used same number model of clear to paint my mclaren. I leave all parts dried in sunlight for 3 weeks i ready sanding and polished and clear coat steel soft i leave in sun again for 1 week and steel soft how long take to cured this clear i worry about this problem I touch hard with my nails and printed easy is not hard. Eny info ?? Thanks

[@timdeakin2524]

What basecoat did you use?

[@Carbodon69]

We used glasurit paint for base but we sprayed some carbon fiber parts with this clear coat at same time we paint the car and douse parts same problem the nail printed on if I pressed i just want to know if this clear 1 day is going to dried completely or is going soft for ever 😅

[@timdeakin2524]

@@Carbodon69 it will go hard eventually. It just seems to to take a very long time. And I guess it depends on what hardeners and thinner you’ve used too?

[@rameestk7463]

Sir, Glasruit or ppg which clear coat is better?

[@timdeakin2524]

They’re both as good as each other 👍

[@alexchoquenina3032]

Hi, did you found what was the problem? Would you recomend that glasurit clearcoat?

[@timdeakin2524]

Glasurit clearcoat is the best in the world. Sorry, I’ve no idea why this happens?

[@dujakovichdanijel]

@@timdeakin2524 was it any better after some days?

[@timdeakin2524]

@@dujakovichdanijel it did harden off, but I will say. It now scratches very easily! I think the anti scratch paint is better if you don’t polish it

[@dujakovichdanijel]

@@timdeakin2524 Thank you! It makes sense as guy from ppg told me once that particles which give anti-scratch properties are concentrated on the surface as clear coat dries and settles in.

[@youdie10]

Curing in oven for the optimal