Glazing a Worn Door With Sherwood Glaze, How To Refinishing A Stained Front Door.

[@ElCalin]

I like all your videos but this one it's impressive. You are so amazing. Thank you.

[@El.Primero76]

I learn so much from watching these vids. Thank you

[@SurlySteve1]

looks good chris.

[@TexasFlyer]

Nice work!

[@Idahopainter]

Thank you! Cheers!

[@mgt00656]

Sweet finish. That look is nice

[@mackhomie6]

door looks amazing. I'm jealous

[@xr500t]

I like the look, but, how did you get the new stain to adhere to the helsmann urethane? Without sanding?

[@veeknitqueensolo7177]

The door looks like new but this is just a suggestion, I don't always toss out my shower liners because they make good disposable drop cloths for messy spray painting.

[@simonehosey3393]

wow chris your materials dry quick, here in calif were dealing with VOC laws.

[@joelstaley7819]

love your videos! also, i like how you post bible versus on your videos sometimes...i always look them up

[@newbiesparks2]

Nice job

[@tamoose1]

Another thing to know is that even though you are spraying clear, you need drops on the grass. The clear finish seals the grass and kills it leaving you with a brown rectangle your customers will not like.

[@tocolee6127]

Bingo!

[@tamoose1]

@@tocolee6127 right?!?

[@veritas2145]

Truth

[@coryenderby]

Excellent video

[@jamespritchard165]

Tip sunlight can cause it to flash dry uneven .You can actually see uneven product on the door

[@Idahopainter]

Yep

[@cwrowe]

Spent some time on this one...good look to it.

[@phil9483]

I would like to refinish my front door and you make it look very easy. Do you ever have a problem with the first coat of stain on the original polyurethane not sticking. Also the door looks great.

[@alejandrojohnston3200]

Can you share the products you use?

[@doug.ritson]

Looks good. While applying the Helmsman there was a lot of drift. Aren't you concerned about drift getting on the windows?

[@VJG213]

I am completely new to all this and I need to do this to my front entry door also. My question is: what is the difference between a stain and a glaze? Should I clear coat or lacquer? Thank you and that door came out amazing. I'm a big fan of your videos.

[@Idahopainter]

Lacquer is a clear coat. If you put glaze on wood that has no clear coat it will turn the wood almost black. Glaze is meant to go over a clear coat. Stain is meant to go on bear wood

[@MattFreytag]

Great Video! I haven't seen one where someone glazed an exterior door. I actually made a video on my channel of using M.L. Campbell Products to stain, glaze, and finish cherry cabinet doors.

[@MyEyesBled]

Even the chicken came by to take a look at your great job!

[@josephfleming7819]

looking new again b&k

[@eduardobanda1974]

I would suggest Stripping front door. sanding. Apply wipping stain. Vynl sanding sealer. sand, topcoat, sand topcoat again.. All could be done withing 4 hours tops..and finish is perfect everytime.

[@terilachonce280]

these videos are confusing me because the way you said is exactly how I've always known to do it as well.

[@terilachonce280]

well, other than the vynl sanding sealer. never heard of that. Going to look into what that is.

[@TheMrSlyxx]

Looks amazing, Chris...don't spray that chicken in the background! LOL

[@Birdies-Frenchies]

Hi i have a job just like this. What is a ballpark estimate. I thinkbi under bid ouch! Thanks

[@Idahopainter]

625

[@williamkorn5295]

Hi CHRIS, on this video you are using a water based base coat before glazing, yet on another similar video you highly stress the need for a lacquer base coat before glazing. Is either water or lacquer base coat before glazing acceptable.?

[@atl96bacon]

i used a minwax stain and didnt let it dry long enough. When I put the hellmsman clear on it starting blistering when the sun hit it. Had to resand the entire door.

[@Idahopainter]

Dang

[@DavidDJenkins]

What is average price you can charge with this method? I have did complete refinishes on front doors but haven't tried this method yet. Was just curious what other contractors charge for this method.

[@RobertMStFleur]

Voice sound too low, tools loud. Hard to watch at night

[@luckyme1313]

Great videos Chris. I'm a builder by trade and do a lot of painting however I like watching a pro such as yourself. Question for you. Was this door a wood door or fiberglass? Would this technique work with worn (sun bleached) fiberglass? I'd hate to screw up a customers door lol:)!!!

[@eidymeraz6024]

Everything is cool but you don’t show the products that you use

[@snowwny]

I have watched a few videos and still have no idea of what is glaze. Does stain and clear coat achieve the same thing as glaze?

[@Idahopainter]

It is a transparent coating that you add after painting or staining

[@veritas2145]

Working and spraying on the customer's lawn. Lol

[@SS-nq2rn]

what is the "glaze" product?

[@Idahopainter]

An SW product

[@laurencemathewriggs8023]

Do u worry about dirt and dust sorting out side?

[@robertosifuentes8022]

Looking to get this done just so I don’t get ripped off what does something like this cost to get done professionally

[@iseeclouds7]

If the customer likes, all that matters. Just understand what he is doing here. Almost nothing about this is what, or how, you would want for a high-end wooden door. This is just a quick/easy makeover for a worn door. It has its place.

[@ram12e6]

What would the steps be ?

[@josuesolis8003]

When I'm spraying the laquor finish it dries uneven , I was watching the video and noticed you don't get that ? Please help

[@carlosarm1098]

Agregarle laquer retarder

[@carlosarm1098]

Y tambien reducelo con lacquer thinner

[@joelmendoza_8651]

One question why don't shoot the clear with hvlp gun?

[@Idahopainter]

It is harder to set up

[@joelmendoza_8651]

Paint Life TV thanks

[@tocolee6127]

I really hate working with Gel/Glaze finishes!

[@veritas2145]

Me too.

[@Slyguy96]

can i get one of those hats. please.

[@Slyguy96]

***** thanks

[@TexasFlyer]

How much come to San Antonio and do my door lol

[@Idahopainter]

Would love to go there

[@barybowman1914]

Use a dry brush to take your glaze off and work it...

[@bluefieldspaintersplus9210]

Why would someone want to do this rather than just stain the door?

[@Idahopainter]

Because it looks pretty cool

[@daviddobbs1364]

I've always underpromised and overdelivered. If they've let a stained door fade and dry out and their expectations are for a glamorous new look, I'd tell them they need to go buy a $1500 door. It looks great for what it is.

[@gerardoramirez4891]

Thats what you get for cheap.

[@Idahopainter]

Cheap?

[@mikerobb5154]

This guy is a joke. You dont stain on top of urethane and claiming that leaving a lot of stain stuck in the corners gives it an antique look. You dont spray urethane from three feet away. I am guessing he tells customers that he has how-to videos on facebook.

[@chevy35c]

Honestly it looks like trash.

[@josephvogel7234]

I don't get it. The door looks like one of those antiquing finishes they used to sell. Fake looking grain. I don't like it at all.

[@Idahopainter]

As long as the customer likes it is all that really matters🤙

[@tonystark9680]

the door is trash!!!!

[@Idahopainter]

Okay

[@BodyByKymXclusive]

You are trash for bringing negative by to his comment section...YOU DID A VERY GOOD JOB SIR....

[@terilachonce280]

if you have an opinion then you should also follow it with your own suggestions don't you think?