#611

  Рет қаралды 17,470

Glitz N' Glitter By Michelle

Glitz N' Glitter By Michelle

Күн бұрын

Пікірлер: 166
@dawnr714
@dawnr714 2 ай бұрын
U don't even have to trace around them. Daniel Cooper has shown that u can put a dollop of uv resin on top of the film then press the cabachon on top of it, pressing down hard to ensure it spreads beneath the whole cabachon and no bubbles under it then shine a uv light on top then u can cut around. The uv bonds the cabachon to the film when u do it that way!! Much easier than tracing! 😃👍💙
@budgetmerch
@budgetmerch 2 ай бұрын
She did exactly that in this video! I think Michelle was just showing some ways it can be done. She does show both, though.
@B.L.Creations
@B.L.Creations 2 ай бұрын
I was going to say the same thing . His way takes less time, and turns out beautiful . Plus much easier .
@riannonwhitford5883
@riannonwhitford5883 2 ай бұрын
I was going to say this is how I do it instead of tracing
@elaineprovan4500
@elaineprovan4500 2 ай бұрын
That's what I do with paint skins. So much easier.
@riannonwhitford5883
@riannonwhitford5883 2 ай бұрын
I’ve done it with scrapbooking paper and nail foils makes it so much easier ☺️
@BBare.
@BBare. 2 ай бұрын
I looked through the comments and didn't see anyone else suggesting this if you take a piece of cardboard or something flat after you crinkle and fuse your plastic pieces then you smash the cardboard down on top of it while it's still hot and it flattens it out very well.
@gerripeter484
@gerripeter484 2 ай бұрын
These turned out so pretty I also do paint pouring and have lots of skins for jewelry. Best way to do it and to make your life easier is to take your clear pendant and find the spot where you want it and put little dollop of UV resin put your clear pendant on it and I with a handheld light and cure it once I have enough that are stuck to the paint skin. I go around and cut them that way saves you from having to trace and sometimes you get that black line.
@AuroraDragonDesigns
@AuroraDragonDesigns 2 ай бұрын
This is absolutely the best way.
@atomicredhead
@atomicredhead 2 ай бұрын
I love little windows. The films are amazing. These are really pretty. You can also set little like a coin on the film and make different designs when you heat it.
@donnagaston6616
@donnagaston6616 2 ай бұрын
I love watching you do resin. You always say we, like we are there with you. They are all beautiful.
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
You mean your not??? LOL
@donnagaston6616
@donnagaston6616 2 ай бұрын
@@glitznglitterbymichelle1 Thanks for making us feel like it.
@ReadingWithGreatGrandma-yc2wx
@ReadingWithGreatGrandma-yc2wx 2 ай бұрын
Debbie, I love those pink skins that you developed for Michelle. What a great idea and beautiful jewelry to boot.
@trudywoessner9251
@trudywoessner9251 22 күн бұрын
I'm new to UV resin, but I found you can crinkle the thicker sheets of film, if they won't crinkle with heat gun, by crumpling the film up with your hand. I enjoy your channel.
@cindybrienze8723
@cindybrienze8723 2 ай бұрын
The films are dichroic, once you heat them if you put something heavy on it they flatten out. I started my crafting journey with paint pouring and have a bunch of skins! So fun and easy to make jewelry
@cindybrienze8723
@cindybrienze8723 2 ай бұрын
Also, love the new time, I sometimes don’t make it until 9:00!
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
New time!!! 6:00 EST
@debranewbigging641
@debranewbigging641 2 ай бұрын
Stunning! Love the fallish one and the one paint skin that looks like a butterfly wing. Love them all.😊❤
@MadHatterArt-Tiffany
@MadHatterArt-Tiffany 2 ай бұрын
Omg😮! They're all gorgeous but I have to say the ones with the acrylic skins are hands down my favorite ❤. Debbie is so nice to give you those skins! Just proves to never throw things away. Even the little clippings from the films. Some companies send out those clippings as little thank you gifts. Thank you for a great video and music
@marybeth17
@marybeth17 2 ай бұрын
Hi Michelle, they all came out great. You too, have a blessed day.🙏🤗💗
@marshacave5286
@marshacave5286 2 ай бұрын
These are beautiful!!!
@tammytoth5874
@tammytoth5874 2 ай бұрын
BEAUTIFUL ❤❤❤❤❤ The teardrop with the Cooper/Gold looks like a Monarch butterfly wing. 😊
@corinachacon4987
@corinachacon4987 2 ай бұрын
Beautiful jewelry!!! The TV does not do them justice.
@ari123240
@ari123240 2 ай бұрын
comes out beautiful
@kimberlyjohnson7139
@kimberlyjohnson7139 2 ай бұрын
They are all beautiful but. Those paint skins...omgoodness, gorgeous!!!
@rosanneducharme5486
@rosanneducharme5486 2 ай бұрын
They all are really beautiful pendants Michelle. You did a great job!
@sonflowergems
@sonflowergems 2 ай бұрын
I’ve been making gemstone jewelry for the past 20 years. I wanted to expand my skills with resin. So many of those look like real stones, opal, malachite, sodalite or blown glass! Gorgeous! Shout out to Debbie for those lovely skins. Also want to try that. Do you think you could just top coat the film to avoid bubbles before attaching the cab? Love this episode!
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
Possibly! Give it a try!
@RenaLarson61
@RenaLarson61 2 ай бұрын
They're all stunning, I think my favorite one is the gold film teardrop pendant, Awesome jewelry Michelle.
@budgetmerch
@budgetmerch 2 ай бұрын
The dichroic film is interesting but I am really hooked on acrylic paint pour when it's mixed with Floetrol - the resulting sheets make wonderful pendants and earrings.
@Mamas-Madhouse-Creations
@Mamas-Madhouse-Creations 2 ай бұрын
These jewelry pieces came out so BEAUTIFUL Michelle 😍 ❤Gail
@neecey_arts
@neecey_arts 2 ай бұрын
I do paint pours also. I’ve done bracelets, rings, necklaces and earrings. They come out amazing! These skins are beautiful. 🙂♥️
@gailbrown8710
@gailbrown8710 2 ай бұрын
Very pretty!❤
@melissaphillis7247
@melissaphillis7247 2 ай бұрын
❤🎉 love Debbie's paint skins! All absolutely beautiful Michelle, thank you for teaching us 🎉❤
@jeaniebrown8119
@jeaniebrown8119 2 ай бұрын
I love watching all of your projects! UV or not! My favorites are always the resin molds, though. Very pretty!❤❤❤
@roseosullivanfromIreland
@roseosullivanfromIreland 2 ай бұрын
Hi, they are beautiful. Have a great day too.
@mariverhagen8082
@mariverhagen8082 2 ай бұрын
They all turned out beautifully ❤ 😮😮! Thanks for sharing this tutorial 😊
@tmgetts
@tmgetts 2 ай бұрын
Thank you for showing how to do the films in jewelry. They turned out beautifully and I can’t wait to try it. Love the jewelry but I love to watch you bling out the hippo, others, and your extras.
@slvihelenevorrenaasand7835
@slvihelenevorrenaasand7835 2 ай бұрын
Ok, so beautiful jewelrys ❣️I love seeing you make them 👀😍
@angelortega7708
@angelortega7708 2 ай бұрын
Absolutely stunning Michelle so the first time I saw this technique I really wanted to try it, but I didn’t have any films so I started playing around with my cricket vinyl. It didn’t crinkle so well but if you put it on top of bubble wrap and heat it it makes an awesome effect. I use the color changing vinyl. They turned out really pretty. Thank you for sharing. Have a blessed and wonderful night.❤❤❤❤
@robloxislandsbyfeathersong
@robloxislandsbyfeathersong 2 ай бұрын
Those all came out GORGEOUS! 😍 I like the ones made with the dichroic films the best! 🧡🧡🧡 I make similar jewelry, but I use a few short cuts that make it go so much faster and easier! Instead of making the cabochons myself out of resin, I buy ones made out of jeweler's glass, & then I dab a bit of clear-drying glue (I use either Glossy Accents or Fantastic Glaze & Glue) onto whatever I am attaching the cabochon to, & then place the cabochon on it , press it down, & let it dry. Once it's dry, THEN I cut it out, rather than tracing the shape & cutting it out first. That way, there's no tracing & you only have to cut once. I usually put the finished pieces into metal trays, like you did for some of them, or, if I'm making 1 inch circle ones, I will put them into a bottle cap & glue a magnet onto the back. Now, I know what I just said doesn't involve using any resin & I realize you have to because that's what your channel is about, but I thought you might want to know about attaching the cabochon first & cutting it out after. 😉
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
Thanks! Yes, I will use resin but next time I will just cut after it's cured! That will save me loads of time! Love the tips and tricks!
@michellesimpson2851
@michellesimpson2851 2 ай бұрын
All of them are absolutely beautiful. You did a great job with them 😻💜😻💜😻
@joburrows9210
@joburrows9210 2 ай бұрын
Beautiful!❤
@lindahale9876
@lindahale9876 2 ай бұрын
Oh thank you so much!
@JrBurriss
@JrBurriss Ай бұрын
Those are so nice. Love them all. The paint skins were my favorite. Just my 1 cent
@debrasmith3764
@debrasmith3764 2 ай бұрын
I love the jewelry videos & saved this one for future use !! The paint skins Debbie gave you are gorgeous. I believe I heard you can make them yourself without doing acrylic pours-don’t know that for a fact thou. Thank you Thank you Michelle !! I love the blues & purple ones. Have a great day
@mollythorpe3545
@mollythorpe3545 2 ай бұрын
❤best one yet
@monicagrocuantmonasterio7736
@monicagrocuantmonasterio7736 2 ай бұрын
They are beautiful, Michelle ❤😊
@janicehetrick3
@janicehetrick3 2 ай бұрын
These are really very luxurious, I just love them. ❤❤❤❤❤❤❤❤
@DebbieRicciuti
@DebbieRicciuti 2 ай бұрын
Love them!
@ruthiemiller2168
@ruthiemiller2168 2 ай бұрын
Everything turned out Gorgeous Michelle
@suewarnes9469
@suewarnes9469 2 ай бұрын
Absolutely stunning! 🤩 love love love them! ❤
@susannasalonpaa2173
@susannasalonpaa2173 2 ай бұрын
These are allways amazing ❤ When I start my resin working few years ago, this was one of my first techniques and i don't never boring it ❤
@LisaBale62
@LisaBale62 2 ай бұрын
My favorite one is the teardrop one with the paint skin 🥰
@annettehaley3338
@annettehaley3338 2 ай бұрын
Beautiful ❤️
@chloeainsworth4334
@chloeainsworth4334 2 ай бұрын
When you said jewelry, I bet you could hear me yelling Yeah all the way to Florida! You know I love your jewelry videos! Thanks for another excellent one!
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
Love it!!
@josetteforde6817
@josetteforde6817 2 ай бұрын
Viewing from the caribbean your uv pendants came out beautiful your the best michelle god bless
@elaineprovan4500
@elaineprovan4500 2 ай бұрын
Gorgeous! Now I want to do some more, too, but I have to finish other projects first. 😁
@lw3370
@lw3370 2 ай бұрын
A nail polish brush is wonderful
@tommie5967
@tommie5967 2 ай бұрын
Wow. So pretty.and it don't cost that much to make. I bet these would be great for fund raisers.nice
@laurajohnson7165
@laurajohnson7165 2 ай бұрын
They are beautiful 😍 such rich colors
@krissisav
@krissisav 2 ай бұрын
I have been wanting to try the fusable sheets to do pendants. Now I REALLY want to try them! All are absolutely gorgeous. ❤
@Sunshine-n1n
@Sunshine-n1n Ай бұрын
Exceptional
@janicepage2257
@janicepage2257 2 ай бұрын
ABSOLUTELY GORGEOUS AMAZING
@miniscenesgb
@miniscenesgb 2 ай бұрын
Wonderful! Amazing work Michelle
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
Thanks Tracey!
@GrimmFusion
@GrimmFusion 2 ай бұрын
I’m so excited that you did this video today. This was my plan for my after work resin project tonight. I have those exact Angelina fusible films and I had yet to try them. So now I know they’ll work and I can not wait to get home now! Also the ones you made are beautiful 🤩
@PLHcrafts
@PLHcrafts 2 ай бұрын
Gorgeous! Those one films are expensive when I looked them up once. It's too bad too because they have awesome colors. I'll look into the little windows ones. ✌️❤️🤣 peace, love and happiness
@carolynpitts2053
@carolynpitts2053 2 ай бұрын
Love the paint chips...great idea..have to try...thank you
@kdscraftcorner
@kdscraftcorner 2 ай бұрын
Very beautiful. I'm pretty sure that really thick film is window film from Temu. I have some of in.
@genevafraser5859
@genevafraser5859 2 ай бұрын
Gorgeous jewelry Michelle ❤❤❤
@toniahughes6818
@toniahughes6818 2 ай бұрын
All really pretty.
@genajones2823
@genajones2823 2 ай бұрын
They turned out amazing
@maddieadams75
@maddieadams75 2 ай бұрын
Beautiful ❤ thanks for sharing 🧡🍁🍂💛
@marthaalvarez214
@marthaalvarez214 Ай бұрын
Beautiful jewelry. I made some paint skins just waiting for them to dry.
@glitznglitterbymichelle1
@glitznglitterbymichelle1 Ай бұрын
Cool!!! Use them for sure!
@georgianacairns145
@georgianacairns145 2 ай бұрын
Love these , thank you for the great ideas !
@DF-so3mz
@DF-so3mz Ай бұрын
I have nerve damage in one hand so when I handle something small, I use double sided tape to hold my thingies in place.
@RoxanaBurr
@RoxanaBurr 2 ай бұрын
Love all of them
@angiekepford6
@angiekepford6 2 ай бұрын
Love the films! Beautiful pieces❤
@kateivester3122
@kateivester3122 2 ай бұрын
❤❤❤❤ gorgeous
@tanyasnyder9033
@tanyasnyder9033 2 ай бұрын
I love the new time. Love the pendants. 😊
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
New time!!! 6:00 EST
@jenniferr8195
@jenniferr8195 2 ай бұрын
Fun! I thought you were going to back the film heart in white though. It sure was pretty with the white behind it! Lovely jewelry!
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
I was but I just ended up doing it all in black 😑
@kaitlyn888
@kaitlyn888 2 ай бұрын
I used black nail polish on the back of my paint skins and I didn’t have to use any resin or paint at all one or two coats to black nail polish and it’s all done You could use silver you could use gold. You could use any colour you like could use complementing colour of the pendant or the paint skin.
@laurajohnson7165
@laurajohnson7165 2 ай бұрын
I’m partial to the blues but the brown black one is gorgeous
@cwv-artistry
@cwv-artistry 2 ай бұрын
Omgosh Michelle you outdid yourself these are stunning although I'm a 2 part epoxy girl I still enjoy the process of uv resin and the beauty it gives as a top coat! I had no idea Debbie was into fluid art! I teach fluid art 😂 and run a fluid art help group 😂 the skins are usually made on a silicone mat or plastic wrap 🌯 just for future knowledge 😉 I have something I need to send you now!!!! Ill write you a note with it and explain how to use it but the effects are insane!! Oh quick tip with fusing, use a pallet knife add heat to the pallet knife as you move it across the films it will help keep it flat and bond at the same time. Hope that made sense if not I can do a short clip to show you what I'm trying to say 😂 much love sweet girl 💖💞 🤗
@cwv-artistry
@cwv-artistry 2 ай бұрын
You know what would be great fun?!! I day where you are the student and Debbie is teaching you fluid art!! That would be amazing to watch!!! ❤❤
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
We’ve talked about it!!
@cwv-artistry
@cwv-artistry 2 ай бұрын
@@glitznglitterbymichelle1 oh I hope you do! At least let her teach you to make skins so you can use them in your resin work! I love when Debbie is on she's so great!!! I want her to paint my husbands Chihuahua for me as a gift for him on Christmas!! Idk how to contact her so maybe you can pass this along to her and ask for me?
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
@@cwv-artistry email me and I will pass it on to her (glitznglittermichelle@gmail.com)
@MsSnailspace
@MsSnailspace 2 ай бұрын
Love them all!! Would love to find a source for paint skins...they are beautiful!!! xo
@dawnr714
@dawnr714 2 ай бұрын
And just like paint skins, U can use leftover resin and just spread it thin on a clean piece of silicone mat! 😃
@kimdulaney7599
@kimdulaney7599 2 ай бұрын
If u do both sides while fusion together & push down with piece of cardboard Hope I’m not being a nasty person, love your videos
@nataliemallozzi6482
@nataliemallozzi6482 2 ай бұрын
I was going to say the something.
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
I love tips!!! Thanks!
@joannedwy7100
@joannedwy7100 2 ай бұрын
If you look back at this video, check out the 4 pendants you have grouped to the left. From a distance, the bottom one looks like a person holding a baby! So cool!
@diangallo
@diangallo 2 ай бұрын
When I got your notification, I thought to myself …is it nine o’clock already? I like the early time, that way I’m not in bed. Will you do it always at this time? I hope so! The jewelry that you made is beautiful ! Thank you for sharing! 💕
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
New time!!! 6:00 EST
@sowhat7472
@sowhat7472 Ай бұрын
Looks like some of those strips are nail foils that you would use size, tack it, or up resin to adhere it
@deebeckham4754
@deebeckham4754 2 ай бұрын
The strips look like what I got from Temu.
@barbaraberkman8439
@barbaraberkman8439 2 ай бұрын
I just love watching you work. You are so creative. I’m a newbie to resin, and your videos are so helpful. Do you have a Facebook group?
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
Welcome!! Yes I do! It’s linked in all my description boxes! Make sure to answer the questions so you will be approved!!
@angelfromhellshawna
@angelfromhellshawna 2 ай бұрын
I think ya forgot to backcoat the heart with UV resin. 😅 You had it sitting up with ones with paint skins. These all turned out beyond GORGEOUS, Michelle!! BEAUTIFUL JOB!!!! 💜🥰💜🤯💜😍💜
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
You made me go find it and check it LOL Yep, it's back coated LOL
@robloxislandsbyfeathersong
@robloxislandsbyfeathersong 2 ай бұрын
No, she did. Stop the video at around 41:23 & you'll see that the backs of both of the hearts are shiny.
@Ali-H3444
@Ali-H3444 2 ай бұрын
I was wondering why you popped the clear out. An easier way is to do every layer in the mold. Even the back coat. That's how I do mine, anyway😊
@hollylowery26
@hollylowery26 2 ай бұрын
The Angelina film is the only film that was made to bubble up and create a good texture when heated. It also will stick to itself if it touches when hot. However it isn't a permanent bond so I wouldn't trust it to stay on a necklace ect. If you really want lots of texture on the film get Don to help you and some one hold the film with 2 pairs of tongs or tweezers and heat the film from the bottom in mid air. I have used a candle and done it on my own, but you must keep it moving so you don't melt holes into it.
@gorgettemotyka6666
@gorgettemotyka6666 2 ай бұрын
Hi Michelle I love everything you make, and these these are stunning 😍😍😍😍😍, m , what resin brand did you use to make the cabochons?
@glitznglitterbymichelle1
@glitznglitterbymichelle1 Ай бұрын
Let’s Resin UV resin
@lorimorin5753
@lorimorin5753 2 ай бұрын
Can you show how to use nail foil ? For the pendants. Thank you! Love all your videos!
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
I’m not sure exactly what you mean.
@lorimorin5753
@lorimorin5753 2 ай бұрын
@@glitznglitterbymichelle1 The nail foils with UV resin I can not figure it out.
@Jfletcherart3642
@Jfletcherart3642 2 ай бұрын
Love these! My problem is how to decide what to charge for different items. How do you decide?
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
Time and materials is how I do it.
@mirandabellamy9336
@mirandabellamy9336 4 күн бұрын
These are beautiful! Do you have a link for the sanding block?
@glitznglitterbymichelle1
@glitznglitterbymichelle1 4 күн бұрын
amzn.to/4hM8lDv
@SherryStanhope
@SherryStanhope 2 ай бұрын
Silicone mat and they peel right off! It's the run off from her paint pours
@ari123240
@ari123240 2 ай бұрын
shell there another way to do this,fill the mold halfway put the film in and cover with another layer of resin
@ntyler71
@ntyler71 2 ай бұрын
You're early!! Lol
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
New time!!! 6:00 EST
@mywifetheartist
@mywifetheartist 2 ай бұрын
When you put the acrylic paint to back coat them did you put U-V resin on top of acrylic paint and put under the light?
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
Yes
@deebeckham4754
@deebeckham4754 2 ай бұрын
Mischelle, I have been having a problem getting my cheap UV resin to set up. I put it on a clear tray with a clear cover and let Mother Nature shine her pure sun light and the get hard. The lamps are frustrating.😊 bought 2 UV lamps and the lights are white?? What ever God provides. Your neighbor from across the state.😊
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
The word that stood out to me is "cheap", I'm thinking that's your problem. I've never ever had a problem with not curing with Let's Resin brand.
@bethswearengen9504
@bethswearengen9504 2 ай бұрын
Love watching all your videos. Thank you for all you do. My question is, i bought the same lets resin uv lamp, my plastic tray seems too small. I can't slide it in and out. It always falls down on one side. I have a really hard time getting it to even stay. It's very frustrating 😑 Am I doing something wrong?
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
Did you flip it? It's not a square tray it's kind of almost rectangular. If it doesn't fit get ahold of Let's Resin and they will make it right with you.
@bethswearengen9504
@bethswearengen9504 2 ай бұрын
Yeah I've tried it every way. I'll try and contact them. Thanks
@lindapauline6393
@lindapauline6393 2 ай бұрын
I am wondering when I watch on some utube they talk about washing your skins if you have used silicone in the paint , need to know why ,not sure if it crack in the jewellery ,I watch daily videos from Glitz
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
I have no idea about that??
@tamianderson94
@tamianderson94 2 ай бұрын
Beautiful! My favorite one, is the yellow brown teardrop one. I am a more fall color kinda girl😊 Do you put them on chais to sell them, or just pendants?
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
I just sell them as pendants
@NiekeDesigns
@NiekeDesigns 2 ай бұрын
These are so pretty! 😍 would regular jewelry glue work instead of the e6000?
@glitznglitterbymichelle1
@glitznglitterbymichelle1 2 ай бұрын
I’ve never used that so I’m not entirely certain
@NiekeDesigns
@NiekeDesigns 2 ай бұрын
@@glitznglitterbymichelle1Okay, thank you!
@DreamLoveBeautyandMayhem
@DreamLoveBeautyandMayhem 2 ай бұрын
After heating press with card stock to make it flat
@cometobedeyes
@cometobedeyes 2 ай бұрын
💙💜
The results from this *NEW* resin technique BLEW ME AWAY !!
23:33
Claire’s Crafty Corner
Рет қаралды 44 М.
#673 Custom Resin Geode Coaster Order Fulfillment! Stunning!
31:04
Glitz N' Glitter By Michelle
Рет қаралды 2,9 М.
When Cucumbers Meet PVC Pipe The Results Are Wild! 🤭
00:44
Crafty Buddy
Рет қаралды 50 МЛН
Amazing remote control#devil  #lilith #funny #shorts
00:30
Devil Lilith
Рет қаралды 16 МЛН
風船をキャッチしろ!🎈 Balloon catch Challenges
00:57
はじめしゃちょー(hajime)
Рет қаралды 85 МЛН
Walking on LEGO Be Like... #shorts #mingweirocks
00:41
mingweirocks
Рет қаралды 7 МЛН
#514 "Into Resin" Gorgeous Molds! Very Embarrassing Ending!!
46:18
Glitz N' Glitter By Michelle
Рет қаралды 9 М.
#263. Taking RESIN ART Into A New Dimension! These ARE INSANE!
15:26
#513 Tons Of Inspiration For UV Resin Closed Bezel Jewelry
50:35
Glitz N' Glitter By Michelle
Рет қаралды 23 М.
295. Resin Paper IS GOING VIRAL! And HERE'S WHY!
14:50
Daniel Cooper
Рет қаралды 66 М.
Washi Tape in Epoxy Resin - Three Pretty Projects
20:59
Louise Singleton Creations
Рет қаралды 8 М.
#480 Testing Istoyo UV Light Making Phone Grips & Pendants!
55:48
Glitz N' Glitter By Michelle
Рет қаралды 7 М.
#505 10 Different UV Resin Pendant Ideas
46:28
Glitz N' Glitter By Michelle
Рет қаралды 10 М.
#452 Major Differences Between Good Resin And Bad Resin + Lots Of Extras!
42:58
Glitz N' Glitter By Michelle
Рет қаралды 8 М.
When Cucumbers Meet PVC Pipe The Results Are Wild! 🤭
00:44
Crafty Buddy
Рет қаралды 50 МЛН