Glock 19 P80 Build test fire

[@bruceeP]

3 things to do all at once oil, slightly polish/sand guide rails, and recoil spring

[@str4tegyy506]

sand recoil spring? even if its oem?

[@bossplaysit8483]

@@str4tegyy506 if it’s own it wouldn’t do this unless he built it wrong

[@30Cal-Cam]

No need to touch recoil spring but your other choices are on point

[@ickyiceful]

Bro no not at all glocks should be able to run zero gun oil they don’t even come with any on them they come with copper anti seize witch is like and oil but not and mainly for the break in period after the guns been fired the copper oxides that’s what gives you the green the first time you clean a factory Glock now a properly clearanced frame just the frame when you make these p80s should be all that’s needed don’t sand your barrel or slide you may make it worst if your having locking issues in the barrel slide well sorry to tell you this you might be fucked should have built it with factory oem Glock parts kit and make sure it’s real factory parts kit top and bottom their is clones advertised as real ones also only use factory Glock mags if you do this you should be able to stay alive in 2023 America lol

[@osk_yvng7025]

@@ickyicefulu dumb fr it’s a p80 not a glock😂 it’s a glock replica🤦🏾‍♂️

[@dankystank8769]

Hey look, a P80 video without the user magdumping in a city. Good job

[@happyman5.798]

👨🏻‍🦳👴🏻👱🏻‍♂️: you’re darn right sonny

[@rudywitdatooli]

Looks like a Ranger to me

[@rudywitdatooli]

Range

[@Midwatches]

Smh

[@ZhairJhonson-kj5fs]

Nobody's shooting in no fuccin city stop hyping it ppl shoot in the woods.

[@R1CARD0C0RT3S]

A couple things could be happening 1. The guide rod spring could be catching the sides of the channel - you may need to grind down the channel some more 2. The recoil spring maybe too weak, I had to buy a 22lb spring to get that slide to reset 3. The safety plunger could be getting caught with in the slide not letting the slide reset- I purchased a polished plunger

[@onetap3048]

Oil it up my man

[@muddyysantanaa]

exactly lmao they act like they’re complete garbage when they can js put a lil juice to em😂

[@donth8me4ever77]

The trigger pack, particularly the silver insert for the rear, often has manufacturers blems on the parts that are bent and the areas around as well. Take the trigger assembly out and give it a bit of attention with sandpaper or a dremel if you can be careful.

[@tacticalbarberpewlife2127]

If you took it apart it could be the guiderod/spring that maybe wasnt put in place

[@bryansanchez5236]

Yup check the spring

[@b.i.ginternational3572]

20p recoil spring will fix

[@Zae_214]

Mine did the same thing, put oil, adjust recoil spring an it should fire good, if not you gon have to get a 20 pound tension recoil spring. That malfunction is called failing to lock into battery

[@TGP-vq4vi]

he prolly shooting 115gr with a strong spring he gonna need 124gr to wear it in and some oil

[@billmoore7007]

The problem is that your shooting a glock get a real gun

[@Zae_214]

@@billmoore7007 my Glock 26 Gen 5 jammed more than my g26 p80 did

[@Zae_214]

@@billmoore7007 I bet your a sig fan huh?

[@brysoncartmell8536]

@@billmoore7007 I can shoot you in the left foot with a sig and the right foot with a Glock and you can tell me which one hurts more

[@eindride1268]

Make sure that recoil guide rod doesn't disassemble on you

[@tbnnicrofinipaxkk]

3 things to check on sand the rail part by your trigger housing an the sides. Oil it a lil bit more and check ur recoil spring

[@snuffleupaguses2881]

Had this same problem. “If” you purchased a new guild rod from the Glockstore, try replacing it with the factory glock guild rod. The Glockstore rod with a 16lbs spring, was more like a 12lbs spring. It didn’t have enough tension to hold in place when firing it would slightly slip off and wouldn’t go back into battery without pushing the slide forward. Trying to return anything to the Glockstore is a nightmare. Their customer service is absolutely garbage. 95% of their products are crap. Check their reviews before purchasing anything from the Glockstore. You have been warned!

[@savag33nt24]

It’s your safety plunger it might needs to be rounded out to allow the trigger fin to glide smoothly with the safety plunger

[@bannedpoet6148]

Oil it and try to adjust your springs they might be rubbing

[@shockgun123friend9]

Right where the barrel connects with the slide there’s too much coating or finish from whatever aftermarket company that is and it needs to be filed down slightly near the firing pin breach

[@gunsandfreedom5601]

Your guide rod channel needs to be sanded

[@jasonbowen5017]

Happened to mine too right out the box, Remington oil and running a couple mags through it did the trick

[@1partygovernment]

You just need to break it in. My first p80 got that issue too but after i put 200rd thru it. It run flawless now

[@cristopperhamilton-gl6jb]

Possibly need a stronger recoil soring. If its truly a build, theres a large break in period. The rails likely need oild and to be smoothed. Shooting it a lot will help mitigate these hiccups. Nice build.

[@DMontezWilliams]

You need to lube It, Mines was doin the same thing Till I Cleaned it, Never had a problem since

[@Big_LosF]

Check an make sure u have a oem recoil spring and make sure you're trigger housing spring is good. Next check you're striker plunger make sure the spring is good. After tht make sure you have a clear passage for the recoil spring. Check these an not exactly in these steps. Just trouble shoot it, I got mine to shoot flawless the first time an never jammed.

[@xt0net0nex66]

Lol that has nothing to do with the feeding , it’s just the feed ramp that needs polished

[@Bigd843]

The housing is probably rubbing against the left side of the striker plate.

[@Badgallbribri]

Its fine just Polish the rails and feed ramp and a drop of oil, if not change guide rod but I doubt that's the problem- G Money

[@Badgallbribri]

Me personally would just keep shooting until it breaks in. It's fine just needs more rounds thru it.

[@412.collin]

Stronger recoil spring, or your extractor is broken

[@djhood6704]

Gun lubricator or file frame more

[@lilbro9772]

Not just oil p80. Need to sand or grind down right.

[@lo5csm]

It’s either need oil or wasn’t build correctly

[@nnm7761]

You got a grind out the guide rod channel a little bit more

[@9X1919]

It’s your recoil spring. Get a replacement Glock OEM recoil spring and you’ll be set. Same thing has happened to me.

[@jasonkidd1716]

Use rounds with higher grain, 125 and up. 115 grain will jam

[@glxckluver6959]

🧢

[@jasonkidd1716]

@@glxckluver6959 say what you want it worked for me

[@CapitalArmory]

Any professionally factory ammo will do just fine , seems like ah user error to me🤷‍♂️

[@448lilg]

@@CapitalArmory prolly dry asl

[@ClapDemNalgas773]

Hold it like a man and it won't jam

[@michaeljoeseph8900]

Go over all bearing surfaces. Sandpaper and or file

[@robertshop391]

It's not milled right an spring in cheap

[@prophetbaby5569]

The lubricant helps a lot but don’t put to much you might mess yu blick up

[@tyronbailey1733]

That’s Called a Gang Glock

[@EagleRun23]

rack that slide 500x before you go to the range, save some ammo and make sure everything is g2g.

[@josephcondon6803]

Sand in your slide where everything rubs together and low lb recoil spring

[@liljean457]

Where you get that slide from

[@NoahHenry-l1k]

When mine did it, it ended up being the safety plunger spring.

[@paulmoss7940]

wait , aint that one dim ne'er stop space lasers ?

[@GNP3WP3W]

I had that on my P80 at first. Just a break in period. After a few hundred shots it’ll go away

[@chrisd5758]

Yea because your tolerances are way off, either didn't remove enough material or drilled holes wrong and after a few hundred rounds the internal parts wore that excess materal down causing premature wear on other parts. Not a good thing my friend.

[@prophetbaby5569]

@@chrisd5758honestly as long as he used the jig the holes are drilled correctly he just has to break it In especially if it’s his first time shooting it

[@chrisd5758]

@@prophetbaby5569 The thing is if you build it right, you don't need a "break in" period. When you have to "break it in" because it keeps having malfunctions, it's because you either didn't drill your holes right, didn't file your rails down properly or you didn't remove enough material from the guide rod channel. Also cheap crappy parts make a big difference too.

[@prophetbaby5569]

@@chrisd5758 exactly it can be multiple problems like for example if he didn’t lube the barrel or anything

[@prophetbaby5569]

@@chrisd5758 and with the rails if the pins aren’t going in all it takes is to use the electric drill tool and keep drilling the holes while the rails and locking block is in

[@yungcocoabutter76]

If you changed to trigger the little metal piece you connect to the trigger is the problem

[@_HoodStYungeen]

Take it apart drip the frame in hot water the take sandpaper and rub it across the top of the frame the put it back together

[@_HoodStYungeen]

Then oil it

[@gotawar2757]

Heavier spring and/or stronger grip to slow the force to go into the slide and not your hand?

[@jonbond6953]

Guide rod issue, rails aren't straight aligned, lubrication, magazine issue try OEM Glock,

[@chriswillis7315]

Happened on my p80 g20 build. Likely recoil spring

[@Stunna83]

Shave the trigger bar that goes over your safety plunger

[@Airsoft_forever777]

That also happens in the Airsoft version is not only yours bro don’t worry is from factory by time it will get right

[@knightcustombuilds6988]

Get it straightened out?

[@xevzity9195]

Did You Ever Figure It Out?

[@GroundZeroTactical]

That break in period tho.😅

[@TENAJDEES1]

Take down spring too high need to be hammered down to slot 100% fix

[@Lilrosefrmeg]

It’s yo recoil spring

[@Big_LosF]

That could be part of the problem.

[@Fckkclayco]

File down the guide rails nd the shark fin if yk what that means

[@claytonsbuilds3083]

Just keep running it an oiling it should stop after a couple mags

[@u_b_so_jellyplayz2735]

Oil , recoil spring , sand it

[@jaquhn]

U didn't put the slide on correct or wrong size

[@midwestspeed7889]

The first problem is it’s a P80, to fix that just spend the same amount on a genuine Glock 19 😂 jk

[@BigJoshB]

Probably not flowing correctly. Pinching on the trigger kit

[@steviepere1822]

oil it up or weak spring guide

[@kaponemafia_340]

Your spring for the kickback need change or buy a whole new gun

[@williamluong2771]

Need a heavier recoil spring to get back into battery😊

[@Ktorome]

The problem is the trigger is the part that hits the safety plunger gotta sand it

[@johnapples4817]

could be the safety plunger needsto be sanded down a bit

[@kyleisdialed3937]

Oil/break in

[@ShawnWicc]

You need higher pressure spring rod. Steel and slide scape 🪒 😅

[@chinosaki8067]

Mag might be the issue

[@therealjumpman]

I got a 357 Glock I love it but my sd9ve with a compensator and new trigger. With a 32 round mag goes crazy plus it's hard to find ammo for the 357 so I'm falling in love with my s&w plus I got the slide sent off to get a top window a side window and to cerakote it matte black and gold trim in the windows. I got the mags sent as well for gold trim detail with my trigger too 😫 can't wait into my b*tch show so I can do some things to her behind close doors 🤫 ps always keep a couple hand guns just n case one mess up 😭 and if you want to customize ur gun please learn about your gun 1st (mic drop). 🎤

[@jerrellparchman5583]

Man rack mf back as hard as u can with no mag a for like 30 minutes straight u gone be good 💯

[@SandsArmory]

Get a Oem guide rod also all my aftermarket guide rods didn’t run well factory runs perfect

[@xfactor445]

What is the hype behind that extended mag? Pros the don’t use that garbage

[@xt0net0nex66]

I had the same problem, everyone saying oil it is wrong , just polish the feed ramp with some flitz had the same problem on my p80 g23 after I polished it , nvr happened again

[@chrisd5758]

Dsmn wouldn't that just be the barrel? In my case it was I needed to remove more material from the channel liner or drilled my holes wrong.

[@xt0net0nex66]

@@chrisd5758 idk bro 🤷🏽‍♂️ I just polished my feed ramp …

[@xt0net0nex66]

@@chrisd5758 actually after looking at the video it looks like you need to remove more material where the recoil spring lays

[@chrisd5758]

@@xt0net0nex66 yes thats what I was referring to brotha

[@PyroThaDon]

its the third hole on the p80 thats doing that

[@Ghostlane_3000]

Dam jammer twin 🤣🤣🤣

[@trilltayy8602]

Shave down channel and get metal recoil spring for gen 3 glock 19

[@Slick4749]

U need a stronger recoil spring

[@2ndAmmendmentAmerican]

Get a tighter recoil spring

[@ashera58]

Bro u need a heavy guide rod

[@TAPATIOPLEASE]

Factory glocks are the best.

[@spoolsociety_nv1159]

You didn't drill your 3rd slide hole.

[@toddkniffin189]

Use a 20lbs recoil spring 😊

[@wooziebandit1411]

Most likely your safety plunger

[@LavisshTv]

Guide rod

[@chrisd5758]

Looks like guide rod channel needs to be shaved down more or its not in properly. Or you drilled your holes way off, you'll know if you have to hammer the shit out the pins to go in.

[@isaacshively5976]

Needs a different spring

[@kjknight7282]

I need help I’m trying get a g17 build but don’t know what all I need can anybody help ???

[@janine1969]

Let it cool. Clean it. Oil it.

[@Dropshot_420]

Oil and polish

[@dabean2268]

if oil doesnt work try new parts

[@Mia.Malliep]

Need a stronger spring

[@deadpurp]

get a heavier recoil spring same shit use to happen to me

[@zaidflowers1828]

I think your grip might be causing the malfunction .

[@kingfuture3953]

Your mag

[@glichonum1697]

Stronger spring

[@10mmTact]

Gotta fix the grip homie

[@SrtBoydVkilla]

Put a Glock oem mag

[@trapjack7184]

Its the back plate

[@gunsandfreedom5601]

That’s a oem it’s just the fde

[@roots3280]

Top of your barrel needs oil

[@gulf-foxtrot-yankee5600]

That was my guess at least till it breaks in

[@ChristianParry-g4p]

Deaf need to oil it but not to much and maybe your frame needs to be sanded down in a few spots

[@viciousvarrow5171]

the mag

[@MoneyMan3443.]

Oil it and keep shooting it till it stops jamming 😂 ^ what i did

[@TheGeneral1391]

You're limp wristing go watch vid on proper grip. Other than that polish internals. Nice build for sure though!

[@YungDooda9]

Sand the lower a lil more

[@victorortiz7848]

Oil the hoe down my boi 💯