Glock 43 Complete Disassembly

  Рет қаралды 360,439

OreGear

OreGear

Күн бұрын

Glock 43s disassembly is very similar to other Glocks. I do my best to demonstrate the main differences in this video.
Assembly video:
Leatherman Juice: amzn.to/2Isq5UQ
Disassembly Tool: amzn.to/2MEgnnq
Check me out on social media:
Facebook.com/OreGear
OreGear.org

Пікірлер: 167
@justjoeable
@justjoeable Жыл бұрын
That one tip on fiddling and depressing the slide release towards the spring has reduced my stress levels immensely. Thank you dearly for that tidbit.
@royd7984
@royd7984 Жыл бұрын
Until I watched your disassembly video, I had almost given up being able to remove that center pin holding the trigger assembly, slide stop lever, etc. Thank you for sharing your knowledge. VERY MUCH APPRECIATED.
@rogermitchemjr6722
@rogermitchemjr6722 2 жыл бұрын
OreGear I just recently got my first Glock (the 43 obviously) and I want to thank you I've been struggling to say the least on how to get this gun apart I watched 2:04 into the video and now I've took the gun apart 4 consecutive times, before I tried easily a dozen times and maybe got it apart 3-4 times in those 12 tries, but your video made it so much easier for me thank you so much.
@MaxTruman777
@MaxTruman777 Жыл бұрын
This is the best gun disassembly video I've ever seen. There's good contrast against the gray mat & good lighting and you don't talk forever, it's quick and concise.
@OreGear
@OreGear Жыл бұрын
I appreciate it
@c0dyCarnage
@c0dyCarnage 3 жыл бұрын
74 people who disliked this prolly are m&p shield owners
@Mulla4xChannel
@Mulla4xChannel Жыл бұрын
Or sig too lol
@EarlMantis
@EarlMantis Жыл бұрын
No. Probably because of the ads
@patf03
@patf03 Жыл бұрын
​@@EarlMantis whats an ad..ha youtube red ..best 12 bucks a month I can spend
@stevenlandon375
@stevenlandon375 2 жыл бұрын
Thank you so much. I just built my G43 and couldn't find any videos on the trigger assembly. The little spring set up is different than normal. Thank you again for this video. It helped me out. Much appreciated
@dcbrot
@dcbrot 5 жыл бұрын
Pushing down on the slide stop was the trick to get the pin out. Great help! Came out with like zero effort when I did that.
@truetexan6676
@truetexan6676 5 жыл бұрын
Thanks for being concise and to the point. You’re a breath of fresh air compared to most of the long winded,put you to sleep asses that seem like they like to hear themselves ramble. Thanks again.
@MackDaddy8154
@MackDaddy8154 4 жыл бұрын
Thank you brother, very well done and informative. Stupid easy to work on once you've seen this video.. no doubt. Kudos to you sir!
@jackieeastom8758
@jackieeastom8758 Жыл бұрын
You’re very concise and accurate and informative. You’ve earned my subscription. Thank you for putting out good content. It helped make greatly with my Glock 42.
@drnozzel
@drnozzel 7 жыл бұрын
I have watched several of these take down videos. Excellent detailed description on how to do it! Thank you! I am not too intimidated on taking it apart to polish the trigger assembly.
@OreGear
@OreGear 7 жыл бұрын
I really appreciate it! thanks for watching!
@drfuzzybottom
@drfuzzybottom 6 жыл бұрын
Thanks, very helpful... “pivot, like you’re moving a couch upstairs” great reference! Made me Snort laugh.
@Liveharley1
@Liveharley1 4 жыл бұрын
Excellent video, i love to take apart and clean or fix my guns, and its so nice to search you tube videos to help us. Thanks again!
@canik9mm
@canik9mm 2 жыл бұрын
One of the best videos on how to disassemble the Glock. Thanks for sharing.
@jesus2299
@jesus2299 6 жыл бұрын
Thanks bro that’s the part I wanted to see. I’m getting a new trigger housing for my Glock.
@GreenMan-em2jd
@GreenMan-em2jd 3 жыл бұрын
Thank you for the much needed help! Worked perfectly on my G48
@jimhardc1014
@jimhardc1014 2 жыл бұрын
Thank you so much for this video the trigger spring was my biggest foe I just couldn’t figure that out. Looked everywhere and everyone showed a standard Glock 19 trigger.
@nominalvelocity
@nominalvelocity 4 жыл бұрын
I was looking for a video to send to a family member in another state who was asking how to do this. Great video!👍
@soderlund416
@soderlund416 4 жыл бұрын
Thank you for showing how to remove that trigger spring. That's the biggest thing I needed.
@harrycarney7854
@harrycarney7854 2 жыл бұрын
Thanks, great takedown. Have a 17 and just got my g43x mos and was leary about the difference in takedown. Made it simple for me.
@wps6311
@wps6311 5 жыл бұрын
Very helpful in being able to replace my trigger component - THANK YOU!
@neuralfix2403
@neuralfix2403 2 жыл бұрын
So I just had this same problem with my 43. Thank you for posting. The trigger assembly was put back wrong and I needed to re assemble it.
@coreyperez13
@coreyperez13 6 жыл бұрын
For this one video alone (first of yours I've watched), I've subscribed. Thanks for the amazing video! I was a "main pin beater" until this video! Corey
@OreGear
@OreGear 6 жыл бұрын
Glad the video helped! Thanks for watching!
@Rico4801
@Rico4801 4 жыл бұрын
Best detailed video on KZbin!!💯 THANKS!!!!
@rickleonard6055
@rickleonard6055 Жыл бұрын
I don't usually comment on YT but this has got to be one of the best viideo's on this topic on here! Thank you.
@robertthetexan8537
@robertthetexan8537 4 жыл бұрын
Great video bro. I'll be using this for my 43X. Maybe there are some differences I might capture on a video. Parts are sparse for the 43X but there's really nothing that NEEDS replacing besides the slide stop and some +2's maybe for your carry mags. The trigger is el mucho better than my G19 and 26 triggers, with Ghost disconnectors and carry springs. (springs good for a carry gun). thanks again for taking time to do a great vid. It's appreciated!
@jona5517
@jona5517 3 ай бұрын
That tip for the striker assembly was nice. Thanks 🙏
@johngotti3203
@johngotti3203 5 жыл бұрын
Finally was able to fix my Glock 43 trigger reset problem! Thank you!
@petewalker98
@petewalker98 7 жыл бұрын
Thanks for the Glock 43 video. I was able to disassemble my glock 43 and repair a reset problem with the trigger. The top cross shaped piece on the trigger rear arm had slipped out of the spring loaded reset "U" shaped arm under neat. Pete
@OreGear
@OreGear 7 жыл бұрын
+Pete Walker I'm glad my video helped! Thanks for watching
@tweebthelerker3952
@tweebthelerker3952 7 жыл бұрын
I just bought one and was curious as to how to break it all the way down. Thank you for your in depth video.
@OreGear
@OreGear 7 жыл бұрын
+Jeremy Smith I'm glad it helped! Thanks for watching!
@neromaniac
@neromaniac 3 жыл бұрын
Needed this. Thank you. Now I need to do the same to the G29
@idontknow93960
@idontknow93960 7 жыл бұрын
thanks for just getting straight to the point and disassembling the gun
@edthompson4514
@edthompson4514 3 жыл бұрын
Great video man... Helped me with my striker and trigger takedown.
@Robmills1967
@Robmills1967 2 жыл бұрын
Thank you so much. Love all the details given through each step.
@OreGear
@OreGear 2 жыл бұрын
Glad it helped!
@jvt_redbaronspeaks4831
@jvt_redbaronspeaks4831 Жыл бұрын
Thanks. I found like 1,000 "field strip clean" glock 43, but no detail cleaning. Thumbs up 👍.
@Tim_Pollock
@Tim_Pollock 6 жыл бұрын
Thanks for the awesome video. I've had many glocks but just got my first 43 so your video was very helpful.
@mrmrslillo5702
@mrmrslillo5702 4 жыл бұрын
You save me from a headache!!! Now my 80 build run flawlessly! Aloha!🤙🤙
@wiggsan
@wiggsan 8 жыл бұрын
Very clear and concise demo....
@bradNewBuilds
@bradNewBuilds 6 жыл бұрын
Thanks OreGear, great video!!
@EmpyrealView
@EmpyrealView 4 жыл бұрын
Excellent video. Great explanations. Good video work. Would not have figured this out without it.
@OreGear
@OreGear 4 жыл бұрын
Thanks for watching!
@FPSBach
@FPSBach Жыл бұрын
Used this to install G42 trigger with bar. Thanks!
@henrysponsel853
@henrysponsel853 Жыл бұрын
great detail with explanation THANKS
@Peter_M
@Peter_M 2 жыл бұрын
Oooo i love u… your tip how to remove main pin is just awesome
@mikemalone4729
@mikemalone4729 8 жыл бұрын
Thank you for the push down advice on the slide release! I came here because I knew I was missing something. It shouldn't be that hard.
@OreGear
@OreGear 8 жыл бұрын
+Mike Malone You're very welcome. Many videos make it more complicated than it needs to be. Thanks for watching!
@mikemalone4729
@mikemalone4729 8 жыл бұрын
This is my 6th Glock - first 43. I knew there was a trick when the usual levering the stop up and down didn't do it. Going back in was a breeze too. Thank you again.
@OreGear
@OreGear 8 жыл бұрын
No problem. It's definitely a different set up to the rest of the Glock lineup.
@9487jr
@9487jr 6 жыл бұрын
Awesome! Great on explaining!
@BigBlueSwisher
@BigBlueSwisher 4 жыл бұрын
Thanks for uploading, very helpful
@brownmht
@brownmht 5 жыл бұрын
Thank you very much! I have used your video a couple times for my 43X. After I did the tigger polish, I reassembled the trigger incorrectly and the trigger wouldn’t reset....it scared the crap out of me. Your video showed me the error of my ways. THanks again
@jorgenoneya5382
@jorgenoneya5382 7 жыл бұрын
Great Professional video, best one out there. Very detail
@OreGear
@OreGear 7 жыл бұрын
I appreciate it! Thanks for watching
@LucisLOL
@LucisLOL 7 жыл бұрын
Awesome video! Just fully disassembled my glock (or any gun for that matter) for the first time. ^^
@OreGear
@OreGear 7 жыл бұрын
Great! I think it gives users a better understanding of the mechanics behind their firearms, which is always a good thing! Thanks for watching
@nikolaik3541
@nikolaik3541 7 жыл бұрын
Very concise and informative, thanks for putting this together.
@oneforalottamoney
@oneforalottamoney 7 жыл бұрын
very informative thank you. Do you recommend to take down the frame? Im told that isn't a good idea.
@Lister-16912
@Lister-16912 3 жыл бұрын
you saved my day, i disassembled only cz guns
@timothyboland2629
@timothyboland2629 2 жыл бұрын
Awesome video. Thanks.
@earleaccount
@earleaccount 6 жыл бұрын
Thank you for the video sir! I've been fiddling with my 43 trying to get the slide off and now I feel like a friggin' dumb ass for not knowing that the trigger must be pulled before the slide can come off! lol
@cbretz2578
@cbretz2578 5 жыл бұрын
Great video buddy. Thank you for this. I know there are plenty of videos, but I chose this one for my 43. You got the thumbs up.
@am_-pz4dl
@am_-pz4dl 4 жыл бұрын
Are the slide internals interchangeable between the Glock 48 and the 43x/43? Like the striker, safety plunger, extractor etc.. Great video! I'm new to the channel, but a big fan.
@jwherron
@jwherron 4 жыл бұрын
Good stuff! Thank you!
@pnwadventurist
@pnwadventurist 8 жыл бұрын
very good video and clear instructions, thanks :)
@OreGear
@OreGear 8 жыл бұрын
Thanks! I appreciate it!
@JeepsCafe
@JeepsCafe 3 жыл бұрын
Very good instructional video!
@cafeqc3793
@cafeqc3793 5 жыл бұрын
Thaaanks
@ghoztvibez6716
@ghoztvibez6716 4 жыл бұрын
Great video!!👍👍👍
@biguy525
@biguy525 8 жыл бұрын
Nicely done video.
@OreGear
@OreGear 8 жыл бұрын
+biguy525 Thanks for watching!
@masmls02
@masmls02 5 жыл бұрын
Thanks for taking the 43 all the way down really hopefully.
@mikeevans8311993
@mikeevans8311993 6 ай бұрын
Thank you!
@DakTime618
@DakTime618 4 жыл бұрын
Great help
@hernandez4307
@hernandez4307 Ай бұрын
Excelente video ... Gracias
@OreGear
@OreGear Ай бұрын
Con gusto
@superfisto
@superfisto 5 жыл бұрын
thanks dude
@anythingiron69
@anythingiron69 6 жыл бұрын
I have a 40 and was replacing trigger springs. I put the gun back together wrong with a pin not going in the right place. The slide sits at a slight angle with the rear above the rails. I cannot get it back apart to fix the problem,any ideas?
@goldenbanjo197
@goldenbanjo197 4 жыл бұрын
I just got a Glock 43x. What upgrades can or should I do to it besides putting night sights on it? Are there better triggers? The trigger seems pretty good, but can you adjust it? Thanks
@bigsmiler5101
@bigsmiler5101 4 жыл бұрын
Wow, you walked me thru taking it apart. So where's the link for putting it back together??? As of 9-29-20, your "Assembly" text has no link. You have links for "Leatherman Juice" and "Disassembly Tool" but where's the assembly video???
@kwondeville
@kwondeville 2 жыл бұрын
Nice.
@herrbrahms
@herrbrahms Жыл бұрын
Did you find the Ghost trigger to do anything to the pull? A lot of online reviews say to not bother on the 43/43x and just leave it stock. What say you?
@leonbuck9745
@leonbuck9745 4 жыл бұрын
YOU DA BEST
@TheRetiredVeteran
@TheRetiredVeteran 2 жыл бұрын
I've never broken down a Glock that far. I use brush, pipe cleaners, and Q-Tips to get in the crevices.
@JLD5500
@JLD5500 3 жыл бұрын
Do i have to oil any of the inner parts on the lower part
@aviator1243
@aviator1243 5 жыл бұрын
I needed to see how you could take out the take down bar but it was not shown
@michaeldingle9791
@michaeldingle9791 4 жыл бұрын
What’s the husky tool you are using in the video
@lorenaseitz8467
@lorenaseitz8467 4 жыл бұрын
Ty
@Loammi30
@Loammi30 Жыл бұрын
Brutal
@V22D
@V22D Жыл бұрын
What about pulling down the bars and pulling the trigger?
@emmadrozen3075
@emmadrozen3075 7 жыл бұрын
This video was very helpful, especially due to this being the first weapon that I own. However, I was unable to get the trigger assembly to come out of the frame. I don't want to break it! Do you have any advice? (Also, I liked the FRIENDS joke in there!)
@emmadrozen3075
@emmadrozen3075 7 жыл бұрын
Never mind, I missed the tiny pin.
@OreGear
@OreGear 7 жыл бұрын
I'm glad the video was able to help! Thanks for watching!
@m.j.cullen5732
@m.j.cullen5732 2 жыл бұрын
Thanks
@OreGear
@OreGear 2 жыл бұрын
Thanks for watching!
@jorgepablolopezmola4684
@jorgepablolopezmola4684 5 ай бұрын
Does glock 43 lower kit fits in glock 42 lower frame?
@brandonjohn24
@brandonjohn24 7 жыл бұрын
I have a G22 and the actions is smooth as ever but I just bought the G43 series 2 and when I go to load the gun, a bullet will sometimes get stuck halfway into the chamber from magazine to chamber and it never sets properly. Do I have to worry about this firing if it all of a sudden snaps back into place? This just doesn't feel right and action is choppy. Brand new gun. Any ideas?
@OreGear
@OreGear 7 жыл бұрын
It shouldn't slam fire, the only way for the action to fire is for the trigger to be pulled. Multiple internal safety mechanisms would have to fail and break in order for it to slam fire. I would try contacting Glock and, if you can, include pictures or video of the failures happening. You can also try taking your gun into a certified Glock Armorer to see if they can diagnose any issues.
@brandonjohn24
@brandonjohn24 7 жыл бұрын
OreGear thank you brother ! I will take it back to original store where i bought it and
@brandonjohn24
@brandonjohn24 7 жыл бұрын
OreGear have them take a look
@OreGear
@OreGear 7 жыл бұрын
Sounds good. Let me know how it goes!
@brandonjohn24
@brandonjohn24 7 жыл бұрын
OreGear is there anyway I can email you the video of what it's doing in case it takes glock a while to get back to me
@dingleberry9341
@dingleberry9341 3 жыл бұрын
Where's the assembly video?
@keziakekel582
@keziakekel582 2 жыл бұрын
@cal30m1
@cal30m1 2 жыл бұрын
Very good, “almost complete”, complete disassembly…
@JK20239
@JK20239 5 жыл бұрын
Do you have to do a complete disassembly to clean the gun?
@OreGear
@OreGear 5 жыл бұрын
Typically for cleaning I simply remove the slide, barrel, and guide rod and clean the exterior of those parts.
@phillips8113
@phillips8113 5 жыл бұрын
Does 43 and 48 have a channel liner?
@OreGear
@OreGear 5 жыл бұрын
I believe all Glocks do
@jps1
@jps1 4 жыл бұрын
1:45 - You're welcome
@dannontodd390
@dannontodd390 2 жыл бұрын
I wanted to see the removal of the take down lock…that’s ALL I was looking for
@mikewalters8361
@mikewalters8361 2 жыл бұрын
I hated trigger shoe i got new trigger shoe for glock 17 it fit on 43 trigger bar easy
@gazpacho4810
@gazpacho4810 2 жыл бұрын
i tried to take the slide off my 43x i just bought it an HOUR AGO. the slide wont come off the slide comes forward like an inch, anybody know whats going on?? am i a dummy😂😂
@micahjaso2613
@micahjaso2613 8 жыл бұрын
Yeeeee
@OreGear
@OreGear 8 жыл бұрын
+Micah Jaso Yahoo
@RageQuit003
@RageQuit003 8 жыл бұрын
I just watched u shilling a muzzle brake for a SCAR-16s.
@OreGear
@OreGear 8 жыл бұрын
If it's the Kreig Machining one, I must say that I wasn't overly impressed
@RageQuit003
@RageQuit003 8 жыл бұрын
OreGear No. The Lantac Dragon. Cuz that's what an expensive gun with a good stock brake needs. Something else that's expensive.
@OreGear
@OreGear 8 жыл бұрын
+RageQuit003 oh that one. They're nice brakes, but they come with frog lube so that sucks.
@RageQuit003
@RageQuit003 8 жыл бұрын
OreGear I'm pretty sure the Frog Lube is to make them easier to remove. For the inevitable buyer's remorse.
@OreGear
@OreGear 8 жыл бұрын
+RageQuit003 I'm sure it is, but when you spend that much on something you typically invest your pride into it too much to sell it.
@duniavizikri5674
@duniavizikri5674 3 жыл бұрын
Haloo
@Iamking330
@Iamking330 2 жыл бұрын
Where reassembly
@xDrGeek
@xDrGeek 5 жыл бұрын
pivot, pivot, PPPIIIVVVOOOOTT!
@Ben28782
@Ben28782 4 жыл бұрын
Steve Sheehan i just caught that on the third viewing. i literally lol’d
@charleshooper1465
@charleshooper1465 Жыл бұрын
totally break a Glock down?? that's above my pay grade. a rule that one of the best cops that ever served with the San Fransisco Police Department always followed....."a mans got to know his limitations!!"
@OreGear
@OreGear Жыл бұрын
A San Francisco Police Officer has certainly got a lot of limitations
@evekim970
@evekim970 4 жыл бұрын
*mrmasterglock on Wick* got Pistol: Custom Glock 17L (with stainless slide), Rifle: 9mm Ruger PC9 Carbine or Custom 9mm AR-9 Carbine or Custom 9mm KPOS Scout pin on pubg,2mm kolibri,beretta,bul,colt,grand power,mac-11,)?Glock19Carbine,Shotgun:Custom Saiga 12 or Custom Vepr 12.kindly check on him
Glock Gen5 - Upper Disassembly & Reassembly
44:31
GlockStore
Рет қаралды 790 М.
Glock 43
37:20
hickok45
Рет қаралды 4,7 МЛН
Как бесплатно замутить iphone 15 pro max
00:59
ЖЕЛЕЗНЫЙ КОРОЛЬ
Рет қаралды 8 МЛН
Mom's Unique Approach to Teaching Kids Hygiene #shorts
00:16
Fabiosa Stories
Рет қаралды 35 МЛН
Опасность фирменной зарядки Apple
00:57
SuperCrastan
Рет қаралды 11 МЛН
When A Gang Leader Confronted Muhammad Ali
11:43
Boxing After Dark
Рет қаралды 4,9 МЛН
How Deadly Is A 22 Pistol? 22 Pistol vs Human
17:04
Garand Thumb
Рет қаралды 7 МЛН
How A Glock 43 Works - 3D Animation
6:46
45Snipers
Рет қаралды 2 МЛН
Chinese sniper vs. American sniper during the Korean War (1952)
50:39
5 Common Concealed Carry Mistakes New Gun Owners Make
8:33
Tenicor
Рет қаралды 1,4 МЛН
FUNCTIONAL FRIDAY "POLISHING GLOCK PARTS"
46:36
JOHNNY GLOCKS the persona
Рет қаралды 284 М.
Glock G43/G43X/G48 budget trigger improvement, part 1
12:56
Regular Dude Gun Gear Reviews
Рет қаралды 9 М.
How To Grip Your Glock 26 & 43 Better!
9:37
GlockStore
Рет қаралды 134 М.