Glock FTE FIXED: you will never guess the issue. G43

[@AZBADBOYz]

Yup, had the same issue when installing my Zaffiri Precision G43 slide. The first problem was the screw was just slightly too long. After fixing that, the screw had pushed a burr inside the hole just like yours did. So little meat on the slide for that screw. PITA problem for sure.

[@2a2day]

It’s your right side optic screw.

[@JARG]

@@2a2day very close I think it pushed a burr into my channel. See pinned comment video

[@brandenapexo604]

Yeah when I got mine for the 19 I basically inspected and lightly sanded down all the ports and chambers works pretty good so far

[@JARG]

@@brandenapexo604 this was inside sir

[@brandenapexo604]

@@JARG I mean nothing a good needle file couldn’t of fixed, either way very informative brother

[@insaneclown158]

0:14 My guess is slide. I find my self not trusting any after market slides, most come striped, Is quality control from the Factory is not best and i always wonder if they do the math right weight removed and springs if they recommended one

[@insaneclown158]

I'll take an 1/2 right on my guess.

[@JARG]

@@insaneclown158 good guess but naw. See pinned comment video for the fix

[@gmoney465]

Where did you get that slide ?

[@JARG]

@@gmoney465 Optics Planet

[@BravoJulietAlpha]

It's from that junk aftermarket slide. Stick with OEM Glock on everything and it will always run perfectly.

[@JARG]

@@BravoJulietAlpha not at all. I have an extra lower and made another gun. Watch the pinned comment video for the fix