GLOCK PRE-TRAVEL REDUCTION PT1--****EDUCATIONAL ONLY***

[@kennykluge9912]

It's so commendable how Johnny makes a TON of educational videos and let's us know what seems like all he knows instead of being like a lot of others that want to keep their knowledge to themselves and act like it's classified info or something. Johnny's transparency is refreshing and his triggers unmatched!!! Thanks Johnny!!! 🤙

[@ea8cxv]

Today I made this modification to my 34 G4 and the change has been amazing. Thank you very much Johnny for your wonderful video tutorials.

[@cymanca]

Ordered a drop in trigger on my 43. Made it a gun that I now trust for EDC as my accuracy is much better with crisp break and great reset without compromising safety. Thanks Johnny!!!!

[@Cant_Stop-Wont-Stop0329]

I always come back to refresh my mind with you're knowledge JG and got to let you know you're a hell of a teacher.

[@xenomorph1317]

‘Then my tool won’t hit the ground’ God bless you Johnny 👍🏻😂

[@thelol1759]

Thank you Johnny! It’s very hard to find quality content on these subjects for my classes!

[@TheHeadman]

Awesome… I’m trying to find a way to shorten the take up with my PSA Dagger. Do you have a video showing the before and after of the trigger pull? Thank you 🙏

[@Frankfoot986]

So it’s just a matter of making a cut and adjusting the screw on the trigger shoe? On a gen5 34 w the evo x comp trigger kit. Obv checking the safeties

[@maxmccain8950]

I just got one of your Vex trigger groups for the Glock performance trigger and want MORE pre-travel.

[@mikecunningham3423]

Have you ever considered coming in horizontally instead of vertically to drilling and taping for #3-48 set screw so you can have adjustable pre-travel ?

[@whoknows8678]

How does the pre-travel limiting set screw work on your modified smooth face triggers? With those, you don't have to mess around at the back end at all.

[@brandonmanchester3535]

how do you fix an over adjustment? firing pin wont lock when slide is racked

[@dahwaterboy1]

Bro... wish you lived in Texas man. I would work for free to obtain some of that knowledge man. Been messing around with the settings myself (putting aside all my OEM parts from my 17) and I'm pretty much going down the rabbit's hole myself lol. Love seeing the results at the range too. Then I'll head back and look up another tutorial educational video. Love these vids JohnnyGlock💪Keeep them coming brother! 😁

[@mikeglockbig2150]

hello, where did you buy the 116th roll punches?

[@JPascal61]

Oh man, I got right to “if this is aluminum”, and 💥. Mine is aluminum. I will search for part 2. Thanks Johnny

[@nicobythebeach1]

Did it ever go up?

[@Ultra-Collector]

What causes the tension on the safety bar keeping it in its safety position? is there a spring behind the bar you just cut the angled tip off of? What keeps that bar in place so it doesn’t just flop around? Please answer! Thank you for your time Johnny! Crisis @UCCA

[@tacroom12]

Could’ve sworn I saw my reflection on those beautiful trigger bars.

[@brianleabo6295]

We need to change your name to professor Johnny Glock I've learned so much from watching your videos. They also make a tool like the pen vise that is a push drill . You push it and it comes back and forth and drills you a hole

[@KayoMonei]

Question so is cutting the square of the safety does that position the trigger itself back a little bit or is it just to help with the pre travel or the position of the trigger shoe didn’t change? Thanks for the vid

[@doddgarger6806]

I have 100% engagement now but I took too much off vertical extension I checked the ledge hold and its absolutely not coming off the shelf until you tell it to especially with the 100% engagement I diamond stoned the cruciform and the break is awesome I hate to throw the bar in the trash on a range gun 🙄

[@johnnyglocks]

How do you know you took too much off the vertical extension the only way that would show is with light strikes.

[@NahBrah22]

Will this work on the slimline 43 combat triggers? I did this on the trigger in my 19 and it worked perfectly. Totally resolved the issue. But I don’t see where the Allen key goes on the slimline one. Am I just missing it?

[@ThePatriotParadox]

So do you use the stainless steel guide rod assemblies? And what spring weight you recommend for g19?

[@miguelguzman3597]

Hey brotha what size roll pin would you recommend for educational purposes of course.

[@luckyking4139]

Johnny , What length is your 1/8" roll pins ? Great stuff Thanks

[@johnnyglocks]

3/16

[@bartashby9514]

@@johnnyglocks 1/8x3/16... in the video you said 1/16

[@leoncrouse896]

What's the size of the roll pin that you're inserting

[@rogervasquez7640]

Another Great educational glock video.

[@macnguyen648]

Did you ever make a how to video about that set screw at 13:57?

[@domenicobruno855]

Hi Johnny what size is the plug inserted? a millimeter? is it enougt?

[@benanthony9422]

I’m surprised nobody has come out with an aftermarket trigger housing yet where you can do this without Jerry-rigging it. Especially with all the hype on Glock triggers, would be cool to see come out

[@grngrss265]

What do you do about the lip on the G19.4 trigger housing?

[@goodboyringo9716]

From time 8:31 it was great but I wish you would have showed the technic on the drawing cause the trigger is just to dark to see, but I got it .

[@icabod3374]

Thanks for all your videos Johnny! I've been binge watching and I am interested in trying this modification. Since I don't have your knowledge or experience (who does, lol) I ordered 1) GLOCK Trigger Mechanism HOUSING w/ Ejector Gen 5 G17 G19 9mm SP33854 and 2) GLOCK G17 G19 Gen 5 TRIGGER w/ Bar SP39702. I figured don't mess with the parts that came with the pistol and use the ordered parts to try this mod out. Does this sound like a good idea to you? Both parts together were only $25 off ebay and I still have the original if I mess up.

[@jeffroe295]

Good idea. You always have the OEM stuff to fall back on.

[@jasonschmidt9569]

If I was going to hang that far on the edge I'd use a (NY-1) to keep it safe or I'd just make the adult decision and send you my weapon.

[@MrPostr3]

I didn't quite understand the third upgrade about firing pin safety though. I would appreciate the explanation. Thanks

[@uwanwilliams8436]

Did you ever get an explanation? I'd like to know as well.

[@MrPostr3]

@@uwanwilliams8436 No, but I did get a

[@danielescobar7618]

When you pin the trigger back slightly, the ramp love starts to engage the firing pin plunger. Look down through your magwell and see how the plunger is impinged upon by the tab that sticks up on your trigger bar. You have to reshape the ramp so it's not pushing it up when the trigger is in its new restricted take up position

[@TXLoneStar_]

Welcome back bro.

[@sgtjoe210]

Great to see you back!!!!! Been looking everyday and here you are!!!!!!!!

[@jiveturkey713]

What kind of punches are those?

[@elginmiguel1]

Would u recomend a zev 2lb striker spring i have for the moment a 4lb but i order the zev what can u say about it? And i have a 6lb trigge spring and a OEM what u recomend?

[@johnnyglocks]

A Johnny Glock trigger 😁😁😁

[@lincolnjensen4785]

Johnny, could you please tell me how long the 1/16th roll pins you use are?

[@johnnyglocks]

3/16

[@derickpesina7076]

Was that a set screw on the shelf?!?!🤔

[@johnnyglocks]

Reset dialing

[@johnnyglocks]

To dial in the reset

[@lucasmarianosena5440]

Hi sir!! Greetings from Argentina. Which size of screw do you use? Have a nice day!

[@mixdbyjoshua5621]

Anybody figure out how to fix the over travel on a Glock 19 gen 5?

[@evofab]

Hello,ok for 17 gen4????Tanks

[@troyj7983]

Hi Johnny, I've been laid up with the virus so I've had a lot of spare time. I watched your video at LEAST 7 times before deciding to improve my G34 Gen4 trigger pull. I already had polished everything and made the light trigger buttery smooth. I installed the roll pin(ensuring to leave some pre-travel and ensuring the cruciform was not at risk for falling off the shelf) and adjusted the trigger safety tab. The striker safety plunger is the only thing I cannot tell if it is properly disengaged when the trigger is fully reset. Is there a good way to test this? I tried looking through the mag well with a flashlight but it is difficult to tell whether or not it is disengaging completely. Your opinion is greatly appreciated.

[@johnnyglocks]

I use a grease pen to see if there is any parts touching. And I hope you are weathering the virus and get well soon

[@troyj7983]

@@johnnyglocks Excellent advice, thank you for the rapid response and well wishes. Stay safe 👍

[@DallasJonez]

What size set screws do you use?

[@grantbuchanan2953]

U need more light on the subject and closer to the subject matter!!! Thanks!!!

[@kdworak4754]

It's totally fine if you have eyes.

[@jadon2709]

Unfortunately I can't see where that knife is going :/

[@VicKennardAK]

If I moved it forward only half way then it would remove about half the pre travel ?

[@johnnyglocks]

It really doesn't work out completely that way but you would probably be close

[@blackwateroutdoors7364]

The roll pins are 1/16th by what? How long are they?

[@johnnyglocks]

3/16

[@blackwateroutdoors7364]

@@johnnyglocks thanks for the quick reply. Going to order a box of them from grainger or McMaster carr

[@markallen1413]

Johnny brother, what is the price of your glass breaker for a pf940 v2 that i had a zev in and it just didn’t work consistently??? You’re input will be greatly appreciated 👍👍👍👍👍

[@timothycourtney7220]

What happened to the rest of the video, it just ended?

[@Michael_303]

There's a part 2.

[@danielhutton3211]

Can you heat a pin and push it through instead of drilling through?

[@johnnyglocks]

I have seen it done that way. Just make sure you're spot on and I don't see why not.

[@douglasphillips24]

As far as pretravel of the trigger I don't mind it because I like a defensive trigger too have a predicable pretravel fell too a very hard wall so I can let back out in the event I don't need to pull through the wall.

[@archangel20031]

Yeah, good to know because my trigger takes about FIVE FEET to fire the gun!

[@stevemartin8744]

Awesome video my man !!

[@thelol1759]

Wait, why does the video cut out at the end?

[@johnnyglocks]

There's a part 2

[@JHolewka]

What size drill bit?

[@johnnyglocks]

1/16

[@johncarro5810]

Love the video and I have been wanting to try this. I know you said it was a 1/16 pin, but what length is it? 5/16 or 3/8? Thanks.

[@johncarro5810]

I found it in the comments!

[@codymcgrane561]

Welcome back brother!

[@Munky332]

Could you not just fill the area with JB weld and the file it backwards? Sure, not as fast as just pinning it, but might be slightly more accessible to some.

[@KayoMonei]

Sitting here thinking the same lol 😅

[@ThePatriotParadox]

I've got some gunsmithing, and all around engineering experience, I would love to work for you polishing bars ect. Putting in pins and anything that needs to be done, and I could learn a lot.

[@shadypalmz212]

would be nice huh, sounds really cool as well!

[@Gmar69]

1/16th roll "pins" and not punches. It's ok though.

[@johnnyglocks]

Thanks bro 😁👍

[@johnnyglocks]

3/16

[@mursenary4]

@@johnnyglocks 3/16 roll punches? Any idea on length needed? For educational purposes.

[@cpd969]

What was the length of the pins?

[@cpd969]

Phil Ellison it’s 1/16. 3/16 is too big.

[@cantgetusername]

Why does johnny glock remids me of johnny Knoxville?

[@Raymo2u]

YAY New Video!!!

[@lifestylesofthepoorandangerous]

Sup raymo! (Its 8ohm2 vapes) somehow i knew you'd be in the comments lol Haven't been on ig for a year or 2 but still vaping on that ktx you gave me. Hope you and your fam are doin good ✌

[@TrailingSkies27]

Don't apologize for the hiatus.... apologize for that hair n headband. Lol. Joking.... Kinda.

[@damon323]

LOL!! It cracks me up seeing everyone chasing a 1911 trigger for a Glock😂 Especially the $270 this guy is charging out of his garage. Nothing against Johnny. But Glocks are so insanely simple, it’s not that hard to figure it out on your own without spending half the cost of another brand new pistol

[@nicobythebeach1]

Coming on an educational video to talk nonsense is laughable. You likely have a hi-point 😂

[@damon323]

@@nicobythebeach1 Ouch! You think of that one on your own??😂😂😂 Sorry to disappoint, but no pot metal pistols in my safe. But I’d love to compare collections. Watcha got?

[@benkiker9895]

What is the length of your roll pins?? 1/16” x 1/4”???

[@johnnyglocks]

3/16

[@benkiker9895]

JOHNNY GLOCKS the persona Thank you Sir!

[@elyknavillus777]

skip to 3:00 for him to actually start

[@theunofficialresults231]

This is great, I now feel confident enough to try on mine. Great detail. Should I stick with a stock connector? I now have a Lantac 3.5 in mine. Thanks!

[@elginmiguel1]

I did mine thanks to u and i love the trigger pull and how it feels i spoke about u on my youtube video look at it wen u get a chance Miguel Glock Ortiz

[@johnnyglocks]

I'm going to check it out tomorrow bro

[@elginmiguel1]

@@johnnyglocks thanks i have u in my coments down below thanks for teaching u are amazing master in Glocks

[@elginmiguel1]

@@johnnyglocks did u had the time to see it ? I made a new one about safety and I put a link to your video so ppl can understand more about safety

[@grantbuchanan2953]

Should have left light on and not close enough to see!!!!

[@AntokenAko]

What size is the roll pin?

[@miroslavm2553]

Aluminum? There is NO piece of aluminum in a Glock! Polishing a steel bracket to look shiny do not change steel property to aluminum.

[@johnnyglocks]

What in the sam hell are you referring to?

[@johnnyglocks]

@@miroslavm2553 that was the correct statement I was referring to the trigger shoe. That trigger shoe is aluminum not polymer.

[@chrisscott1547]

Could really benefit from close-ups of the actual parts.

[@johnnyglocks]

I'll keep that in mind