Glock Upgrade: Micro RONI SBR/Carbine Conversion Kit - Desktop Review

[@XxInfinityxXTimer]

*imagine that one lucky bastard found this badass looking upgrade for his glock in a zombie apocalypse*

[@jerrygutierrez5514]

Imagine u growing the fuck up and stop watching fantasy u fucking child.Zomboes don't exist moron if they did your bitch was would b dead first stupid so please stfu and come back to the real world child.

[@sheepocalypse3898]

@@jerrygutierrez5514 Imagine being that one fucking loser like Jerry Gutierrez. Now thats the real tragedy!

[@EldenXord]

Glock is truly an OP pistol

[@blake102989]

So technically you could open carry your glock without a ccl in Indiana since it's considered a sbr because you're allowed to open carry a rifle without a license in Indiana lol

[@kimisdaman]

Since the Glock is such a "small part" of the complete unit, it could/should have been made for the G34, or even G17L, for better ballistics.

[@PacificTacWest]

Thanks for watching. I know CAA keeps adding this for other models.

[@turdfurg47]

According to the atf now if thats not a perminant modification its no longwr considered a short barrel rifle

[@xDATD9UDEx]

This tactical accessory will turn your pistol into a carbine-style firearm! This non-NFA accessory does not require a tax stamp, no ATF paperwork, no wait, and it doesn't require an FFL.

[@LeadAlchemist2133]

If it has a stock then yes it does, don't spread false info

[@xDATD9UDEx]

You are wrong, sir go to there website

[@LeadAlchemist2133]

@@xDATD9UDEx sir the ATF has been "making laws" that have undone what you stated above, and now consider anything with a pistol brace and no tax stamp to be a illegal short barreled rifle. CAA may have forgotten to update their website. Abolish the ATF is what I say...

[@xDATD9UDEx]

​@LeadAlchemist2133 I haven't figured how the ATF makes laws anyway. But the new law you are talking about that the ATF tried to implement got reversed a while ago

[@Angel_V-915]

Will a glock with a threaded barrel fit? And do they run a fed. background check for these?

[@PacificTacWest]

Thanks for watching. These won't run with an extended TB. You would need to file a Form 1 and get your tax stamp approved before putting Glock in device and that process goes thru NFA branch of ATF.

[@2ezoutdoors348]

no sbr restrictions in Michigan anymore! definitely gotta get me one. these look legit

[@PacificTacWest]

+Kyle Vallance that's awesome. Love the Micro RONI. I don't think you'll be disappointed. Thanks for watching.

[@2ezoutdoors348]

Pacific TacWest no problem buddy, just subscribed. didn't necessarily mean this exact set up but somthing like it! pretty cool how ya can take a normal every day handgun an turn it into some halo looking shi*!!

[@PacificTacWest]

+Kyle Vallance thanks for subscribing. There are a lot of carbine options out there. Folding stock an simple design of this is what drew me to it.

[@JettBlast]

Congratulations that is awesome!

[@billythompson8443]

Should have been two guns 17 in the back/top 19 in the front/bottom

[@ricecooker7037]

Kek double the bullets, double the fun

[@ArkansanPartisan]

Adds what 3 inches to the barrel, and you have like 5 inches of clip just hanging out of your gun

[@2TimeGarage]

Why’d you have to fill out paperwork for a conversation kit. I didnt

[@elmercardenas809]

PRETTY ONE.. LOVE GLOCK THAT WILL BE MY NEXT AIM TO BUY FOR MY GLOCK 19 GEN 5 USA MADE

[@PacificTacWest]

Thanks for watching. Love this setup and glad I filed a Form 1 on my Glock 17.

[@hectorluiscandelario8038]

My question is does it has to be mandatory a 9mm cannot be a , 40 or a 45 caliber

[@Good_Hamster5674]

Me: Mom can we get an smg? Mom: We have an smg at home. The smg at home:

[@jaimemartinez3866]

Need to make one for the big boy glock 21. A real bullet .45 ACP.

[@PacificTacWest]

Thanks for watching. Future form 1 filing.

[@JettBlast]

The new model are back order for the 10mm and. 45 acp pistol kit which is a non-NFA item, visit CAA website the White color one is $225 free shipping. The new version MAC is a huge leap forward from the design take a look you will really like it. caagearup.com/product/mck-micro-conversion-kit-stabilizer/

[@jaimemartinez3866]

@@JettBlast Roger that. Thanks

[@JettBlast]

@@jaimemartinez3866 No problem, I am anxiously awaiting mine to arrive next week!

[@m3rri3n36]

What size (how many rounds) are each of those mags?

[@ritchiekenney2686]

make it full auto then that would give the casing a real purpose to steady the aim while it's spraying

[@gelozyg1732]

I dont like the friction lock/hold on the spare because any tactical expert may just pull the extra mag and use it against you which is not safe in a closed environment or any close quarters combat

[@PacificTacWest]

Thanks for watching. You might prefer the KPOS Scout.

[@PanelVanStan]

They should make a roni for Springfield hellcats

[@farrukhshaikh3952]

Glock wear a tuxedo for dinner....😂😂😂

[@andrewpajak8058]

Please don't misunderstand, I'm trying to learn more: why do this? What's the benefit of an sbr over a pistol (other than improved stability via having a stock to brace against your shoulder)? It LOOKS like a bunch plastic, like fairings or body kits for a car...they don't do much for performance. Educate me please?

[@mattlewandowski73]

The ONLY real benefit of an SBR over a pistol is that a SBR has a stock which gives you a more stable shooting platform as your body absorbs more recoil than your arms can. Secondary benefits include ease of mounting and using optics, and ability to use the foregrip to have a more stable platform for shooting. On the other hand, a carbine conversion or a carbine with the same mag type as your pistol gives you the advantages of more power from the round (due to more powder being burnt before the bullet exits the barrel), also gains improved range and potentially improved accuracy from a longer barrel. SOME carbine conversion kits include ATF statement that while the frame is attached to the conversion kit it is a rifle, but when detached it is a pistol with no need for registration changes. Thus so long as the barrel of the conversion kit is not cut shorter than 16".

[@robertcollins2905]

So is the mag in the front just a holder or does it fire all the rounds from both magazines??

[@PacificTacWest]

Thanks for watching. It's a magazine holder.

[@phoboskittym8500]

Is there a reason one would mod their Glock over getting an actual SBR? is it some kind of ATF rule? Or is it like just cheaper than getting an actual rifle? Or is it a continuation of like Mauser C-96 pistol carbines?

[@PacificTacWest]

User preference. I dig this setup but ATF rule is you have to SBR your pistol.

[@marsjupiter4007]

What an idea!

[@christopherdean9684]

I feel like this would benefit most with 10mm and .45ACP glocks, because you get extra power without much more recoil.

[@PacificTacWest]

+christopher dean thanks for watching. Yes, this would be great on a 10mm or a .45ACP.

[@benmoody5269]

Once the handgun is put into the Roni conversion kit, and I have my SBR tax stamp, am I able to remove the handgun from the kit and carry it as a CCW or does it have to forever remain in the kit as an SBR?

[@PacificTacWest]

Thanks for watching. My understanding is once you register the pistol as a Class III firearm it will forever be a Class III firearm and not something you'd want to carry. Looks like a normal Glock but registered as something completely differnet.

[@dutchschultz3076]

It looks like the shells can't eject with the stock folded?

[@PacificTacWest]

It can. Shoots pretty well when collapsed. Thanks for watching

[@dutchschultz3076]

@@PacificTacWest thanks for the reply 👌

[@PacificTacWest]

You're welcome

[@robdeskrd]

Ive seen their flashlight it is slick

[@imchris5000]

miss out the chance to do two dual drum mags

[@PacificTacWest]

Next time. Thanks for watching.

[@noumanahmad8093]

this is super cool...got to get my hands on it...

[@PacificTacWest]

www.yrsinc.com

[@Act_Of_Vengeance]

I don't understand, the front clip just hold the clip or shoot bullets...?

[@PacificTacWest]

Just holds bullets. Verticle grip doubles as mag holder.

[@StJohn724]

What makes it a SBR? You haven’t changed the barrel length. You haven’t changed the frame. You haven’t modified the Glock in any way. What you have done is added an accessory to your Glock. Is it because this Micro Roni uses a shoulder brace verses an arm brace? Very curious because I’m looking a purchasing one shortly.

[@PacificTacWest]

Thanks for watching. Yes, because this has a buttstock and not a brace ATF categorizes this as SBR and requires the Glock pistol to be registered as a SBR so it can be used in Micro RONI.

[@HemiLife713]

Will this fit my smith and wesson 9mm springfield

[@PacificTacWest]

Thanks for watching. This version is designed for Glock 17. I believe they made other versions for different pistols but you'd need to check website.

[@MrSENTINELOFFREEDOM]

I got to fire my 3D printer up

[@jswallet]

Todd Hart Got STL files?

[@4581103992010]

John Wallet search roni on thingiverse

[@jswallet]

Jack Jones I’ve got 2 micro Ronis

[@allmotordc5rallmotorfa575]

@@jswallet would you sell 1? Lol

[@precision_Air]

With that glock being registered as a "rifle", are you still able to conceal carry the glock without the roni? What about driving with it loaded? Are there now restrictions?

[@PacificTacWest]

Thanks for watching. Pistol is now registered as a Class 3 and I've been advised not to conceal carry this pistol. Since pistol now under NFA as a Class 3 there are restrictions that go with it. If something you are considering I would recommend getting a separate pistol.

[@precision_Air]

Pacific TacWest Thanks for the reply.

[@PacificTacWest]

You're welcome

[@mattlewandowski73]

It depends entirely on your state as each state has different laws. In many cases a carry permit is limited to pistols, and while the Glock started life as a pistol, once licensed as a SBR, it is a rifle and likely no longer qualifies.

[@Saadi_Lyfe]

Fire with the buttstock folded? Where would the shells go?

[@PacificTacWest]

Design of stock allows for shells to eject. CAA designed this well.

[@jamzchannel7807]

Is this the link to buy the kit??I need this. . . .

[@PacificTacWest]

Thanks for watching. You can check out yrsinc.com. Solid company and where I go for my CAA products.

[@RRAMJET82]

I thought I wasn’t interested in it. But A buddy has one and I shot his. I AM SO SOLD. His sin the .40 cal. Version and loves it. Can you get one to be able to use the Glock G20.

[@PacificTacWest]

Thanks for watching. Currently only available for 17, 22 31, 19, 23, and 32. Wish they had this for the Glock 20.

[@swatman1337]

the best carbine ive seen

[@PacificTacWest]

Thanks...and thanks for watching. ATF makes this one a bit more of a hassle to own.

[@johnsmith4630]

I wonder what the barrel length limitation is, I mean in terms of getting it in at that angle? What do you think?

[@PacificTacWest]

+John Smith thanks for watching. Are you referring to getting pistol into RONI? If so there is a different model for each type of Glock Pistol (full size or compact). This one is for the Glock 17, 22 or 31 and there is another for Glock 19, 23, and 32. It's a tight fit and I am not sure of would accommodate a threaded barrel or not. Hope this answered your question.

[@humbertomorales9644]

Me gustó mucho el vídeo, dos armás en una buena idea, gracias y cuentas con un suscriptor más.

[@Shep01]

but where? There is no room really, also no point in the slide because you can swap slides all day as long as barrel length isn't changing. I got a Fab stock fits the gen 3. Cool if you can ignore a slide snapping like 2 inches from your eyeballs.

[@PacificTacWest]

Slide was done on top by front sight (Did this since slide has SN as does frame). Frame was done under trigger guard. One option is to find a place that does laser engraving and do this on the frame.

[@Shep01]

Bottom of trigger guard crossed my mind, as did the Glock Co spot on top sides. Glad to know it can be done. Thanks again for info.

[@gregedwards1087]

I have to ask, apart from being a more stable platform for better aim, what is the point of this device? It makes the weapon bulkier, less managable and slower to bring to bear without any significant increase in hitting power or range than the original weapon, seems superfluous and unecessary.

[@PacificTacWest]

If you are looking for a SBR 9mm carbine this is a very efficient way to accomplish this. You have a reliable Glock base and end result an inexpensive 9mm carbine. Sure you can go the path of a Sig MPX or other like design but this might not be something that is affordable to all...this one could be.

[@gregedwards1087]

PTW, thanks for the response but you really didn't answer the question. The device makes the weapon more complex and bulkier without any increase in range or hitting power, in what situation would this setup be of any use? There is another version that actually has a longer barrel that is fitted to the pistol, the Civilian Pistol Carbine Conversion by the same company that would be a better option as it would increse accuracy, range and hitting power, the Micro Roni seems to be a useless setup.

[@PacificTacWest]

First, thanks again for watching. The design of the Micro Roni was to have a device that could be used in a CQB situation or protective detail. End of the day you have a Glock 17 with a shell creating a 4.5" 9mm Carbine. While the Micro Roni would make any pistol bulkier than without, this device does improve accuracy as I have had groupings on this at 25-50 yards that the pistol by itself did not. Yes, a 16" barrel will provide additional value but the aim of the Micro Roni was to create a CQB style weapon that would fall in same class (in regards to size) of the Scorpion EVO, Sig MPX or a KRISS Vector. Hope this answers your questions.

[@gregedwards1087]

PTW, thanks for the answer but I think I will stick with my Browning 9mm Hi-Power and F90M as they are, or if I am required to do House clearing I will swap out the 508mm (20") barrel group of my F90M for the 360mm (14") CQB barrel group. Cheers.

[@stonewolf6853]

Longer range accuracy, less felt recoil, three full rails for assesories and bc it's effing fun and cheaper than a separate dedicated carbine.

[@sethbibby6291]

Could u fit ur glock in one of these if u hada killswitch onit

[@PacificTacWest]

Thanks for watching. Are you referring autosear switch near rear of slide? Not enough space for that. It does appear to allow for a glock 18 fire selector but tight space nevertheless.

[@raziel33581]

looks like halo's smg

[@lilbigdaddy5042]

Beautiful beautiful gun

[@PacificTacWest]

Thanks and thanks for watching.

[@katahajimeudegarame2397]

i have this one, the new MCKs not looking the part for me, too toyish, Ronis are better

[@shanes7703]

You register this as an SBR, yet you have the pistol brace rear end on it? Seems like you're selling yourself short if you don't get the actual stock. And technically it is not an SBR with that on there.

[@PacificTacWest]

Thanks for watching. While it might look like a brace, this is classified as a stock by ATF. Narrow but stock nonetheless.

[@ErnestJay88]

i can't believe macaroni ended become a gun.

[@thesoupman2604]

BROOO ITS OBVIOUSLY A JOKE

[@thesoupman2604]

Aka pun

[@danew637]

does it make sense this is categorized as SBR...?

[@PacificTacWest]

According to the ATF it does.

[@Shep01]

Hey I did this to mine as well did you mark the receiver(handle)? and if so how?

[@PacificTacWest]

Went to local place for engraving and did it on frame as well as slide (CYA).

[@hasjfa]

i cant get the extra mag off the extra mag sppot

[@joedirt8653]

Does anyone know the reason why the hand gun has to be registered as a rifle just because it being put in carbine enclosure? Why can't the gun just be treated as a hand gun when it's removed from enclosure and a rifle when it's in it? And WY do you need permission to remove it from state? It wouldn't be much of a difference if a person purchased a carbine rifle . Is there a reason for this ?

[@PacificTacWest]

NFA. Once pistol is in carbine and barrel length is less than 16" the firearm (Glock in this case) must have a Form 1 submitted for a SBR tax stamp.

[@jonathanparker9908]

Looks nice

[@PacificTacWest]

Thanks for watching.

[@Miso_Hornie]

Yankee Doodle stuck one of these in his hat and called it Macro Roni.

[@PacificTacWest]

+Dave Biddle haha. Thanks for watching.

[@steffensamlal1854]

Dave Biddle ole school I love that rhyme, great comment

[@timblanks5184]

Dave Biddle lmao

[@robdeskrd]

OMG! You are friking awesome Mr. Biddle!

[@jeffreybryant4243]

Perfect. So I trade in my Kris Vector? Naw 😂. But it looks interesting

[@ibonitlog]

this is just badass.

[@PacificTacWest]

Thanks...and thanks for watching.

[@Bowzee303]

They need a version of the folding stock exactly like this without the butt of the stock. Would love to have one with a GHW tailhook on the end. That would eliminate the Nfa bullshit right?

[@PacificTacWest]

+Scotty Phipps thanks for watching. They make a RECON model of this. That has the hinged end cap and with a bit of fabrication you could make up a brace and not have to deal with NFA since would still be a pistol. Same principle of something like the Sig MPX pistol with Sig Brace.

[@rrplanb4030]

Folding arm brace would be a sensible move.

[@radeexpitheta]

do you know if this will work with a 6 in barrel or will the shroud prevent the g17 from using an extended barrel?

[@PacificTacWest]

+radeexpitheta thanks for watching. This will actually work with a 16" barrel. I will be uploading a video in next week or so showing what needs to be done to install with linger barrel. Video shows 16" since this would make it so no Tax Stamp is needed. Hope this answers your question.

[@ronindebeatrice]

Pacific TacWest Fairly certain it would still need a stamp if you're going from a pistol to carbine, regardless of overall length. By all means, if you *know* otherwise, feel free; take care.

[@rdudley9699]

What is the since in this?? And doesn't fire any better faster more accurate why why why because you can rest it on your shoulder??

[@mayoguy13]

R Dudley It actually allows your to fire more accurately. You have more area to grab and also by testing it in your shoulder, you’re able to deal with the recoil much better.

[@ernestcortezjr.6905]

That's kickass

[@PacificTacWest]

Thanks and thanks for watching

[@tmaddrummer]

I can’t see this as a SBR?

[@PacificTacWest]

ATF does...3 points of contact and rifle stock + vertical grip all with a barrel under 16"...NFA rules for you. Wish they would just repeal that bit.

[@tmaddrummer]

Pacific TacWest I do understand, I just don’t agree with their assessment.... stay safe and shoot straight!

[@levisloan8823]

Not a legitimate question more of a smart ass comment but if you have an sbr and the barrel is not rifled is it still an sbr

[@palmtack2164]

Will Trijicon tall suppressor sights work with the micro roni

[@MrAnthony992]

Can you put a suppressor in the micro roni?

[@PacificTacWest]

Not on this design. There is another Micro Roni where the flash hider is wider and can accommodate (dependent on size/brand of suppressor)

[@f.e.r.t]

Here in Savoy there is no tax and my glock is still registered as a pistol.

[@PacificTacWest]

Thanks for watching. In the USA we have to comply with the NFA branch of the ATF for things like this.

[@f.e.r.t]

@@PacificTacWest It's dumb, but i's better to keep it legal. I love your videos keep it up 💪

[@davidemigh446]

Anyone know how to contact the company for questions

[@PacificTacWest]

Thanks for watching. Contact page from YRSInc website is where I'd start.

[@dallascallaway5485]

When you pack a punch twice😂

[@c-jam6392]

Dallas Callaway lol 😆

[@krazykozey2259]

😂

[@micharris1761]

so since this is now a rifle , dose it come off your ccp i bet not, lol. nice video

[@PacificTacWest]

Thanks for watching. I can say that since Glock 17 is now SBR per ATF I no longer have this one as an EDC pistol.

[@alfredoclealiii3974]

Do they have one for the glock 21?

[@PacificTacWest]

I haven't seen this available for Glock 21.

[@davidsingleton3945]

Im taking that back part off

[@PacificTacWest]

You can get one without. Thanks for watching.

[@silashof]

Is that legal in swizerland?

[@PacificTacWest]

Thanks for watching. I'm not sure about Swiss gun laws.

[@erictanis1979]

Hey man Nice n simple table top review! I installed my G17 with adjustable Dawson precision rear site so i m curious if that is going to fit in the Micro Roni??? thankyou!

[@PacificTacWest]

+Usmc0321 thanks for watching. Good question. In looking at this online it looks like it will fit the cut-away section of the charging handle that goes on the slide. Let me take a look at this later today and see if I can confirm with a bit more certainty.

[@PacificTacWest]

+Usmc0321 sorry for delay. So I took a look at the piece that goes on top of the slide. There is a cut away for factory Glock sights but depending on how high the Dawson Precision ones are, it could be an issue.

[@erictanis1979]

Pacific TacWest hey bud thanks for looking into it! Much appreciated! I took a quick measurement on my dawson sight and it looks like they sit a good 3-4mm up above the slide as i had to adjust them up to properly zero my pistol. Is that gonna interfere with the piece that sits ontop of the gun?

[@PacificTacWest]

+Usmc0321 let me take some measurements later this evening and I'll get back to you with what I find. My initial thought is that 3-4 mm should be fine but with something like this, measure twice, cut once right?

[@erictanis1979]

Absolutely dude! It would really schucck big time if i got it without doing all the necessary research and it didnt fit or work. Looking forward to hear your findings! Oh now you got me thinking i have Fiber optic front sights as well on my G17....i wonder if there is enough room inside the Roni for it to run properly.....

[@Fubuwil]

Would this work with a Glock 34?

[@PacificTacWest]

Thanks for watching. I do not believe this is compatible with G34 but if you check out yrsinc.com you can confirm if they have a model that will.

[@MississippiWopGenius396]

does the roni require a tax stamp?

[@PacificTacWest]

In this configuration yes. Thanks for watching.

[@MississippiWopGenius396]

@@PacificTacWest what if the stock is kept folded

[@MississippiWopGenius396]

@@PacificTacWest ok-I remember you just cant shoulder it- I got big chubby wop cheeks:)

[@PacificTacWest]

Because this one has a buttstock and not a brace it requires the pistol be registered as an SBR. There is a version that has a brace which doesn't require the tax stamp.

[@MississippiWopGenius396]

@@PacificTacWest i ordered the wrong version-but they sell the brace as well I'm guessing they are interchangeable

[@MrSurdico]

Y la prueba de tiro ???

[@deathtopeta]

if the pistol is now registered as an sbr does it mean that it's a transferable item that can only be sold to shop and private individuals with the necessary stamp and atf and sheriff approval and waiting period?

[@PacificTacWest]

+Dagz_lyfe a thanks for watching. Short answer is yes. This is now a registered NFA weapon and any transfers would occur as with any other NFA weapon. Hop this answers your question.

[@stevedodge7025]

Once an SBR Always An SBR. You cannot take it out of State without Prior Permission. And all the other SBR Requierments.

[@lilchiphoprnb3912]

Do they make one for the 31 Gen 4, .357?

[@PacificTacWest]

Thanks for watching. Yes and it looks like you can preorder this one. www.yrsinc.com/en/micro-roni

[@marceloA1313]

REALLY GOOD UPGRADE ,MAKE THE SIMPLE GUN IN THE MACHINE GUN .

[@PacificTacWest]

+marceloA1313 thanks for watching.

[@domkepa5122]

marceloA1313 machine gun? How??? Do you even know what you are talking about. Obviously you do not.

[@marceloA1313]

Dom Kepa WTF DO YOU SAY SIMPLE GUN YES Í DO

[@henrysantos121]

Nice.👌.

[@LOWIMPALAonZs]

Is there a follow up where it's really converted to carbine? #AskingForAfriend

[@PacificTacWest]

Here's a link to this running an IGB 16" barrel. Thanks for watching. kzbin.info/www/bejne/g2fLgIetnb2Sm5o

[@ApaPapaLah]

With the added weight, the recoil would be almost nothing.

[@PacificTacWest]

That's about right. KPOS redesigned their carbine...KPOS Scout. This one is incredible slim and low profile kzbin.info/www/bejne/aZvbqqx_gqqZiKc

[@cholito1989]

Verry impressive. Although, im still confused about how to purchase this SBR Micro Roni Kit. I live in Tx. Are you saying I need the tax stamp to buy the Roni kit Itself? Or only to register the glock as an SBR? Thanks for any information you can give. Thumbs up on your video.

[@PacificTacWest]

+cholito1989 thanks for watching. I am not an attorney but you can purchase the kit when ever you want. However you cannot put your glock pistol into the kit until you have your approved Form 1 from that ATF. Here is a link to where I got the conversion kit goo.gl/i5NBdv.

[@PacificTacWest]

+cholito1989 tax stamp is only for registering the glock as an SBR. But you don't want to get caught with this without a stamp. Hope this helped. Let me know if you have any other questions.

[@robertwest4299]

Pacific TacWest no. Be careful. You can be arrested for "constructive intent" be safe and buy the stamp first.

[@devashishmandavi3866]

Amazing guns

[@paulleepoy8039]

I have to get this in pellet gun form

[@huyouxun4567]

Can a glock 18 fits?

[@PacificTacWest]

In this model yes.

[@x3383-k7z]

the size after assemble almost same with assault rifle ~

[@PacificTacWest]

Thanks for watching. Overall size is comparable to a SBR but still a pretty compact design as a whole.

[@jasonallmon2384]

im curious if you still plan to carry your glock like a handgun as that would not be allowed now that its an SBR and not a pistol correct?

[@PacificTacWest]

+Jason Allmon thanks for watching. I intended this pistol to be used only for this project. Also, I am not a lawyer but I would imagine if I carried a gun that is now registered as a NFA firearm it would not go over well in any situation.

[@jasonallmon2384]

Figured as much. good ole ATF...Keep up the cool content!

[@PacificTacWest]

Will do. Thanks for watching and the conversation.

[@FFEES]

Where can I get this?

[@PacificTacWest]

YRSInc.com

[@tarikhalifa4785]

Cool af

[@PacificTacWest]

Thanks and thanks for watching.

[@krazykozey2259]

Yeah my ass that's the first time you put it together 😆🤣😂

[@dungmai7213]

Hi Team i like the gun. i like the gun style Here is my question Why not make Glock 19 Micro Roni SBR/Carbine with out any conversion Kit. Team it just my input. i am sure it will work and people will buy it.Good luck

[@PacificTacWest]

+dung mai thanks for watching. Could you clarify your question as the Micro RONI kit is what converts Glock to SBR. They do make this for Glock 19. I just used my 17 in this case.

[@powerdrinker69]

Because everyone wants a heavy slower to use handgun. Every 9mm or 45mm rifle I've shot was complete shit. theirs a reason he did add a clip of him shooting it.

[@trainingsingh5216]

Pacific TacWest i

[@faridbaba_akani9120]

Afrique a incraable talents

[@njo9966]

Good review. What are your thoughts on adding a sound suppressor? Ive read that it won’t fir because of the Roni’s barrel shroud. Could you put a slightly longer barrel on it? Maybe 6” or so to give clearance for the suppressor? Also, what is the overall length of the Micro Roni?

[@PacificTacWest]

Thanks for watching. With this design I would be difficult to fit a suppressor. Away at the moment but I will double check if an easy modification can be done to accommodate so stay tuned for that. As for over all length...about 22” for the Glock 17 version.

[@njo9966]

Thanks. Appreciate the info.

[@PacificTacWest]

Hey. Sorry for delay. Took a look and this version does not appear to accommodate a suppressor without any major modifications. There is one that comes with enhanced barrel shroud that looks like it would be more accommodating.

[@njo9966]

Pacific TacWest, thanks for getting back! Appreciate the info.

[@PacificTacWest]

+NJO you're welcome.

[@jaderamos46]

Is this Legal in pa

[@PacificTacWest]

Thanks for watching. Can't speak for PA specifically. Even if legal in PA, you still need to file for SBR stamp with ATF.

[@omarparra4593]

FOR CARACAL f ?

[@PacificTacWest]

+OMAR PARRA haven't seen this for that. Thanks for watching though. You can check YRSinc.com or CAA website. I know they make for other pistols.

[@JaredHighlands]

Ahh you would need to register it and get a tax stamp guess I ain't getting one

[@PacificTacWest]

Thanks for watching. Yeah...NFA stamp needed for this. There is a brace version and last I checked. Might be worth looking in to.

[@vincentpina]

WTF would you register your gun?

[@PacificTacWest]

Thanks to NFA if you want to do this you have to get your tax stamp (to be legal and all). Thanks for watching.

[@budisantoso4904]

Can i think, easy to operation, but hard.

[@JP-nu2mu]

Yo what state are you in?

[@PacificTacWest]

I was in OR. Now in TX

[@JP-nu2mu]

@@PacificTacWest lol good choice

[@amitaimedan]

It's just a glock in a plastic suit, what's the point?

[@stonewolf6853]

Three contact points vs one, i.e. the grip, the forward grip and shoulder stock vs just the grip. More stability, more comfortable to shoot, longer range accuracy AND the ability to mount optics.

[@stevedodge7025]

It improves accuracy a lot. And Range too.

[@domingogonzalez2784]

Amitai Medan this is for airsoft players

[@mattstephens6137]

@@stevedodge7025 what are your sources for that claim? Because I've watched nothing but the opposite results in accuracy and range.

[@stevedodge7025]

Are You Saying A Shoulder Stock Does Nothing for Accuracy?