Custom G34 Competition Pistol

Lenny always says, "If you can dream it, we can create it!" And here's a prime example!
When you're ready for the custom Glock of your dreams, give us a call at [phone].

[@tuxiepapa84]

This is like QVC....but for Glocks.

[@alessandromatteo8365]

Yeah but this stuff is way more better...lol

[@FreddieFingerz]

I know I’m 5 years late but this comment deserves more praise lol

[@johnharding6986]

Lenny, you are the most awesome gun guy who tells it like it is a share the worst and the best in Glock Community, and you're how to are the best showing the how-to I can relate to when someone who hands you a weapon right. I have served 31 years in the us army and seen most of these things and appreciate on seeing someone who cares about others as you do . Contacted your service by phone they were professional and honest bought various items they worked flawlessly. Love seeing your custom work and other items . If I am ever out and California or Nashville will stop in and see you.

[@jasonantonation4395]

Lenny does such a good job in these videos.

[@tonyromano6220]

Yes he is absolutely the best bench guy on the WWW!

[@Rushshooting67913]

I've been watching your videos for awhile now. I just want to say your company does some amazing things with Glocks and keep it up.

[@KTS73100]

Wow, gorgeous Glock!! Ya'll do excellent work!

[@scottparker3323]

love the table setting joke. I enjoy your video. learn alot from Lenny. thank you sir.

[@trangia12]

Love this gun. Normally I do like changing glocks but wow this is nice.

[@frankword9889]

I love watching Lenny, his voice takes me back to my childhood years listening to the "Casey Kasem Top 40"

[@JR-ld1et]

OMG I like that trigger job and the finish on the frame and the grip !!!!!!! Glock should take some notes from this !!!!!!!!!!

[@1971TheDon]

this guy never fails to amaze me! dynamite voice too!

[@mikegallagher3916]

Just came across your site. Agree with the comments below. Such a breath of fresh air with all these other goofball yahoos. You sir, are a professional.

[@kidgokuxl]

What a beauty. I feel like I'm looking at my next Glock. I hope Santa is working this summer on special orders.

[@808G8GT]

This is My all time favorite gun that GS has modded!!

[@sidneyisais8862]

Great video, makes me want to buy a custom G34. Also I work in the aerospace industry, I don't know if the NP3 has a different name or what, but I don't think I've heard of NP3 coatings on any parts of an airplane.

[@rogersiples3335]

Just bought a new g34 gen 5. I want to take it to the Nashville store to be fully customized. If I understood correctly, the shop can mill the sides of the stock slide - that's awesome. The rest is just drop in parts.

[@MrNiceKnife]

Sweet piece 👍

[@JeremyTheWaver]

Dude your voice is awesome

[@gavinlantry1227]

would great for the radio...

[@williamsmith1651]

Sound like Mike Rowe from dirty jobs

[@gordon9768]

This is the first video I saw on this channel, and I'm convinced you are gun bob ross

[@TylerLabbe]

Amazing craftsmanship

[@kentuckyjustice1408]

Lenny, you need to get the heck out of California and move to a firearm friendly state like KENTUCKY. You can do it *ALL* here.

[@MrHav1k]

How does somebody even run a gun channel in California? Jesus Christ. There's a reason all the other channels are based in the Southeast.

[@manuelgonzalez-rey2138]

Beautiful Gun!!

[@kevinlamarr1424]

Larry, you're joking but that place mat knife set deal is truly awesome!

[@WitsawaSripetkla]

You got a golden voice.

[@archangel4316]

GLOCKSTORE needs to open a Retail Store/Shooting Range in Ft.Worth, Texas!!!!!!

[@1320Exotic]

Beautiful Gun

[@casper5075]

Clearing the gun always makes me think of gun newbies. I always teach newbies to cycle the slide three times when clearing the gun. The third time a bullet flies out should clue them they forgot to remove magazine first. ;-) Those cuts look like they really make slide move easy.

[@knndyskful]

Lol I never considered using a Glock mat for a place mat :D I think I might buy some for that now

[@GunCollector007]

What a masterpiece!

[@tonyromano6220]

I need a Glock matt. I can store it with my 1911 mat I just remembered is buried in the closet! 😂😂😂

[@AlfredoJimenez-tm4sl]

Lenny Miguel, you're my hero

[@glock343rdgen.4]

lovely, but does those cut can cause the slide to be compromised. weakening it in a sense?

[@MiguelMartinez1980]

I'm going to try buying those as place mats

[@sever427]

Me too. For my garage desk and office desk

[@mrrustygray]

Lenny needs to open a shop in Florida. Tampa. Satellite store. PLEASE.

[@retroshawty2303]

That is beautiful....

[@chriscosby2459]

That G34 is sweet 😋

[@nelsonenaccion4x424]

That is an SEXY glock 34 my freind outstanding JOB and coat color very very Niiiiiiiiiiiiiiiiiiiiiiiiiiice good video too THANKS

[@stevenbentley3491]

Sir,,,,,you are the Man 🤘🏼🤘🏼🤘🏼

[@caseytodd7632]

"...and I'm Casey Casem, and on with the countdown." Say it.. please, say it.

[@Sal_Gunz]

We cut the Viper red dot into the slide… but it's really a MOS. You can tell by the adapter plate it's sitting on. How do you make these videos without the right information of what you're trying to sell?

[@SuperBubba360]

New to the channel, new to guns, gen 4 not California legal? And are all the modifications legal in CA?

[@tonyromano6220]

That is one sexy gun.

[@pedrof5406]

I have to say I am extremely disappointed I had my glock 43 sent off to have the NP3 finish done to the slide. The finish looks nothing like the one on the video it's more of a matte look to it and doesn't even look right. And to find out that they don't even do the work at the glockstore they have the slide shipped off to robar.

[@onofriozappa2801]

How do I order that exact build?

[@mattxon7423]

Is the gap between the slide and frame too big? Does it even matter on a firearm like this?

[@paulfrantzis1]

is it IDPA accepted

[@paulcrans804]

Take a Glock, change everything, and still call it a Glock? Too funny.

[@88kouk]

Lenny what is the weight of the recoil spring you use at this competition glock ? 11 lbs?

[@gillegaspino]

Sir how may i avail your accessories to customize my glock34 gen5?.. Im here in the philipines sir

[@darthlament2708]

Could you add the extended guide rod on a g22?

[@paulcrans804]

When you replace everything, is it really still a Glock?

[@FirstLetterK]

How many lbs guide rod did you install?

[@MP3427]

What division would you shoot this in IDPA? Would it be CO or ESP?

[@Lenmorey]

Beautiful gun can't have in calif that sucks

[@tim7325]

"Glock Perfection" immediately replaces every part. - Every Glock owner ever

[@robertsouth5710]

Do you ship to Massachusetts?

[@shamuslockey]

Can I use a gen 3 g34 slide on my gen 4 17 frame?

[@louisrichards2587]

What are the cost for slide cut

[@djrandol3841]

How much, just like that?

[@bigblock-wz4bb]

John wick style!

[@crockett616]

Here's something I've never understood. Everyone says that more reciprocating mass equals more (felt) recoil. But isn't the energy and therefore the recoil going to be the same anyway, if the lighter slide is moving faster?

[@thealchemist013]

crockett616 , correct, Lenny is wrong. Momentum (recoil) =mass x velocity, lighter slide, faster it goes=same recoil. Adding weight under the barrel axis however, or in-line with the palm, reduces flip (i.e. rifles).

[@crypt0cracy748]

The lighter the mass the easier for your hands to control the recoil and faster target re-acquisition.

[@joestockton7016]

Great voice, great video, great G34 build. In my subjective opinion the slide cuts don't look good; they should be of equal size or increase in size by the same value/increment as the smallest one. The frame needs to be pained/coated. The mag well is just a bit too big. Liked/subscribed.

[@bens2603]

What does MOS stand for?

[@frankcruz1751]

Where can I order it? Or what’s your website?

[@RJ-wo8fd]

About how much is this upgrade

[@Mumbowjumbow]

How much does a job like this cost?

[@hou26guy]

What size recoil spring

[@mccoy-15]

Why you don't test fire them in the video for people to see

[@user-qs2mr1bu4w]

Is Gen 4 legal in California?

[@nigelnido8070]

How much is this set up??

[@MrZola1234]

Huh, I thought the gen4 and 5 were illegal in Ca

[@sornkeadsiri6486]

Looks like a knock off dragonfly slide

[@Suerte_Pepe]

I need a 34 gen 4 in my life

[@doaburnout1205]

Gen 3 more options js

[@HamSandwitchClips]

I want the exact same gun just mine will be coated with titanium nitride

[@ronaldc8973]

Omg screw 1911 this is a beauty

[@haringusbaw6132]

You take that back, mister..

[@thealchemist013]

Once again Lenny is wrong, NP3 by Roburn IS a polytetraflouroethelene (or Teflon)solid finish not "like Teflon", and is NOT self lubricating (meaning the finish would actually be breaking down) . Slight lubrication is beneficial (as oil cooking on a Teflon skillet)

[@danielcruz9986]

y can buy the same gun

[@tonyromano6220]

PSA Dagger is poor man’s custom Glock!

[@rmoore4yris]

Just curious: All this aftermarket work for this Glock probably adds up over $2k. With that being said, is it better than let's say a oem CZ shadow 2? Considering they're roughly about the same price?

[@GlockGuy10mm]

your question is self serving type question, He wasn't comparing this gun to any other. It was showing a video of the custom work done. If you like Glocks then you understand why a person would want this. If your comparing guns and prices then you are price shopping not going after the gun you want. I drive a Ford pick up, GMC and dodge have pick ups also at similar prices but I like my ford. Same with my guns. we invest in what we want and like. have a good day buddy

[@rmoore4yris]

@@GlockGuy10mm Maybe YOU misunderstood my question. At the time, I was shopping for a CZ Shadow. Have seen plenty of modded Glocks before. But really haven't asked anyone, "is it comparable with the mods to a Shadow2". That was it! Not trying to downplay the Glock. Which I'm a fan of the G17 & G34. Just was figuring out where to spend my money. Currently I have a modded CZp10f and use it competitively and a S&W M&P ez performance for concealed carry. Satisfied with my choices. This question was over 1yr ago. SMH

[@herosupport1606]

so when is Glock leaving California?

[@jozenirperes7891]

Can you guys send a gun like that to Brazil?

[@JeepCherokeeful]

Awesome jokes !

[@Sm0nkyB0i]

Noice

[@raymundposadas6574]

can you custom a G34 Gen 3? I have no choice from California

[@royroyv.7551]

That trigger is good?? Hmmm

[@paulsemerau1474]

I think the magwell is too small 😆

[@tonyromano6220]

Hummm, recoil is caused by the power of the discharge….lighter in my mind is more about speed…and I guess less mass is less impact from force…. The physics is way beyond me. I guess heavier guild rod and lighter slide….❤❤❤ makes one think!

[@TotallyBilled]

good luck selling those now days in 2020 😭

[@saifrehman218]

that gun so cool .

[@saifrehman218]

that gun is so cool.

[@EvendimataE]

why dont they do those slide cuts at the factory?

[@knndyskful]

EvendimataE would make it more expensive, not everyone would want em

[@thealchemist013]

EvendimataE , only makes it "cooler, and harder to clean"

[@10xshooters]

how much does a custom slide job cost?

[@sunshineninety9]

$325 on their site: www.glockstore.com/Custom-Speedrail-Slide-Cut

[@OriginalEric]

Far more than it's worth. AFAICT they often can't even get the machine work centered on the slide. It happened on my order, and check out Lenny's video about the lord of the rings guy's custom Glock.

[@aaronswank6739]

You lost me at the trigger!

[@vaughnburrows]

what's the price for that package?

[@kurtjensen7264]

vaughnburrows you know the old saying -if you have to ask you can't afford it.

[@vaughnburrows]

Kurt Jensen No, like Robert Kiyosaki says it's not I can't afford but how can I afford.

[@doaburnout1205]

Red dot 300+. Slide you can pick up a zp for around 300 at gun show. Drop in trigger is around 150-200 depending on brand you want. Magwell is about 30-50 depending where you get it and how fast you want it. And a barrel is around 200 I bought my gen 3 34 for around 600 new with case and 2 mags. So for around 1000 you can make your Glock worth about 2grand . But you can find Glock 19s dressed up really pretty like this 34 in the video with all the work done and red dot for around 2100 at any gun show or store altho you might have to ask for a catelog at some shops as some don't carry such things but are willing to order it for you

[@kurtjensen7264]

That gun is so sexy I think I need a cold shower

[@gblan]

I woulda Cerakoted the entire thing matte black.

[@patrickibrahim971]

Bojack gunman

[@TWDxKILL3R]

I’m surprised California didn’t say that mag well bottom made it an “assault pistol”

[@ottobauch2179]

TWDxKILL3R that gun is more than likely being shipped out of CA

[@brianstone3651]

Looked like the trigger sucked to me.

[@thealchemist013]

Ya. "Slight break"...or take up. THEN a 1/16 or so of ... shall I say "second slight break" ... THEN the actual break. Junk $200 trigger to me too, or not installed/tuned correctly.

[@user-ps9bq1nu6l]

The cuts don't reduce re coil ..ur just making more room for dirt to get in .. actually a heaver slide is better .. thats why Glock beefed up the g 35 ..

[@jwo62192]

It's not USPSA legal either but that geek has never read a rule book.

[@knndyskful]

Jeff Oakes I’m curious, what makes it illegal for uspsa? I don’t know the rules and stuff but I’ve always wanted to get into competition

[@Frankfoot986]

It’d be legal for open, no? Be at a disadvantage scoring minor tho

[@knoxxylove8560]

So how is it a California resident can have a Gen 4? None of the Gen 4 Glocks are approved by the DOJ....

[@goofypanda2259]

There are many ways a California resident can have a Gen 4. One of the ways is being a licensed firearm dealer, which I'm pretty sure he is and famous for.