GlowShift | How To Install A 7 Color Series Oil Temperature Gauge

[@adityadharni5027]

How would i install 3 gauges into the car if I only have one source for each of those, theoretical question: Would I be able to crimp the orange wire of 3 different gauges into one fuse expansion?

[@Vazzilizsthlm]

Yes you can

[@GlowShift]

Yes, we actually recommend doing that.

[@adityadharni5027]

@@GlowShift perfect thanks for the reply

[@Petethebuilder]

Why does a wire go to headlights?

[@djsi38t]

@@Petethebuilder so the gauge lights up when turning on your headlights..

[@divoarioo]

Are the sensor for oil temperature and oil pressure in the same location at the engine? What if I want to install both temperature and oil pressure?

[@xlayfps2721]

The wire for constant power, is that the wire to save the colour setting?

[@GlowShift]

Yes, that is correct.

[@xlayfps2721]

@@GlowShift thanks heaps mate 🤙

[@dthangdre]

Lets say thats i already have oil temp gauge installed, how would i install my other 2 gauges if i already used 3 expandable fuse for my first gauge alone?

[@GlowShift]

Clip off those current expandable circuits and use 3 new ones. Twist all of the red wires from the gauges together and place them into one expandable circuit. Then do the same with the yellow, black, and orange wires.

[@dthangdre]

@@GlowShift appreciate you fam

[@tjcleave2646]

I thought you couldn't use teflon tape on anything to do with oil...

[@Petethebuilder]

Why does the orange wire go the the headlight fuse

[@GlowShift]

To enable the dimming feature when the headlights are turned on.

[@timothyluta5433]

I cant find any oil ports on my 2014 vw passat tdi, looked at forms and found nothing I bought the gauge just can't install it please help

[@catalintrandafir9736]

your vehicle must have a stock oil pressure sensor or oil temp sensor, try finding a Y adaptor that will fit instead of the oem sensor, and on one "arm" of the Y adaptor reinstall the oem sensor and on the other arm your aftermarket sensor.

[@THALORD503]

Do I have to have the sensor installed in order to have power working on the gauge? I have my ground and my test light shows it’s solid. I have the 12v ignition linked to my fuse box with rest light showing that I am solid there. But before I go through the trouble of taking my filter off and installing my sandwich plate for the sensor, I wanted to atleast see if I have power to the gauge. But when I turn my key on, I get nothing from the gauge. So I am wondering if the gauge has to be wired to the sensor to work. Otherwise I’m lost. Unless the I am using the wrong amp fuse. I’m using a 3 amp to add to my 7.5 ignition with an adapter.

[@boosted_miata4775]

Im having the same issue, did you ever figure out the issue?

[@Petethebuilder]

No you do not need to have the sensor connected to get power to the gauge

[@philspaghet]

2:57 please just solder it together properly

[@ScuffedDonut]

Do you really need an oil sandwich plate for this?

[@GlowShift]

No, it all depends on how you plan on installing the sensor.

[@surslaughter3524]

Do I have to have the sensor installed in order to have power working on the gauge? I have my ground and my test light shows it’s solid. I have the 12v ignition linked to my fuse box with rest light showing that I am solid there. But before I go through the trouble of taking my filter off and installing my sandwich plate for the sensor, I wanted to atleast see if I have power to the gauge. But when I turn my key on, I get nothing from the gauge. So I am wondering if the gauge has to be wired to the sensor to work. Otherwise I’m lost. Unless the I am using the wrong amp fuse. I’m using a 3 amp to add to my 7.5 ignition with an adapter.

[@GlowShift]

Without the sensor, the gauge will still power on but will not show a reading until the sensor is connected. The gauge will only work with a GlowShift sensor.

[@surslaughter3524]

@@GlowShift well I’ve got no power to the gauge

[@GlowShift]

Double check all of the wiring to make sure none if it crimped or not fully connected. If you you are still having issues, reach out to customer support directly using the live chat feature on our website.

[@surslaughter3524]

@@GlowShift it’s been solved but thanks you. My next issue is am I okay with Keeping my oem oil pressure sensor in the block and only. Applying your gauge sensor to my sandwich plate? Or do they both need to be next to eachother

[@GlowShift]

They do not need to be next to each other.