Gluwphy 20w 8-in-1 Laser

Gluwphy is a startup laser company that wants to bring enclosed Diode lasers to DIY enthusiasts everywhere. This 20w class 1 laser marks their first entry to the laser market and has quite a bit to offer.
The laser is able to engrave and cut a wide variety of materials along with the capability to use a rotary engraver without needing a separate riser base.
*************************************************************
Get the Laser here: amzn.to/3xOyAH2
Checkout www.Gluwphy.com for more information
************************************************************
**Ask questions, I would be happy to talk about and answer any questions you have about this laser
---------------------------------------------------------------------------------------------
***Please consider subscribing and supporting the channel on / geekbuilders
Custom designed shirts available from TeeSpring:
geekbuilders-shop.myteespring...
More info - Go to:www.geekbuilders.net
----------------------------------------------------------------------------------------------
-Follow and Subscribe
/ geekbuilders
/ geekbuilders
/ geekbuilders
***Check out the Making Geeks Podcast
**www.makinggeeks.com
-------------------------------------------------------------------------------------------
Music was purchased from:
EpidemicSound.com

[@GeekBuildersNet]

Quick Note: The Flame Sensor Issue Was resolved with a quick adjustment on the physical machine

[@TheLouisianaHobbyGuy]

If you take the cover off the flame sensor, there's a variable resistor inside you can turn to adjust it. And you can engrave clear acrylic. Just leave the paper on it and mirror the image.

[@GeekBuildersNet]

I figured out the flame sensor after I released the video, I just never posted an update. As far as the clear acrylic, I have not tried it with diodes, but I have been able to engrave clear glass. I will try the acrylic with your recommendation. Thanks for watching.

[@allenxu5146]

The fan is a vortex fan, which is commonly used in air purifiers, it has a rectangular air outlet, so the holes according to the shape of the air outlet.

[@GeekBuildersNet]

Noted. Thanks for Watching

[@gilaraujo]

Those fire sensors are just UV light sensors. so if you open the lid, puff! If you get a little flame up on cutting (Which happens) puff! No camera i assume? not even as addon?

[@GeekBuildersNet]

They are planning on adding a camera for their 2.0 version. The laser does have a projected "x" on the piece that helps with placement though.

[@purejade4298]

very interesting

[@GeekBuildersNet]

Thanks for watching