GM Chevy GMC Passlock Vats disable made super easy and quick. No special tools. Short video no bs.

Basic of disabling the Passlock security system. Is your security light on and truck starts and dies?
Please give a like if it helps. Helps me a lot !!
Also posted a video of my freinds 6.0 ls 5 speed swapped S10 Blazer. • Firing up Chevy S10 Bl...
Factory 2 door 5 speed S10 Chevy Blazer in the junk yard.
• Chevy Blazer S10 2 doo...
It was a 1998 or 1999 V-6 S-10 pickup.
I can not tell if this will work on another other years or models. I did this one time ever and years ago. If it does please share your stories.
Just cut one of the two yellow wires. If that one didnt work put that back together but cut the next yellow wire a few inches farther as you don't want them cut in the same spot. Then that one whould work.
I hope this helps. Took me a ton of research to figure this out. So many other video's don't show or explain it easily then extra loud music which over powers the speaker. Much less shows it works. I was able to drive the car around to its final destination with no problems.
Also did a P0420 / P0430 O2 by pass fix. Video link
/ giv7auiki7
P0420 430 low catalyst system efficiency
If this was usefull please like it. It helps me with KZbin.
Too many keyboard cowboys on this site with no video's of thier own love to hate.
Here was the link that worked for me but seems now dead. So seach also for bull26 or GM service bulletin 26. www.gmupfitter.com/publicat/b...
www.yumpu.com/en/document/rea...

[@wendylynnt427]

Thank you sooo much! I’m about to lose my mind over this! I’ll definitely be trying this tomorrow!!! I appreciate you 😊

[@jordancritser7479]

Good one says the same for 2000 impala like how you got straight to the point.

[@J27M]

Thanks. Saving us all the aggravation which is from the misinformed going on the Internet and repeating wrong info.

[@mobilemowers]

Oh yes I got tired of that crap. After much research I figure it out. I hate videos that don't show you the trick worked. It last a month or two without fail till we parted it out. Was a nom payment storage yard truck with holes in the floors and wasn't worth trying to title. So I had nothing to loose. Sorry for late responce I just do this as a hobby and for the past few years of this never made one dime from you tube. They did that 1,000 plus member bs.

[@jilllawson7000]

Great!!! Finally someone who gets right to the point and shows me how to solve my ongoing problem with starting van. I had van running in less than 5 minutes. I had listened to tons of videos on this subject without getting info to permanently fix it. We are talking a couple months. Even garage couldnt fix it this easy.👍👍👍 I am a gal on a tight budget...Thank you

[@mobilemowers]

Yea I had the same issue so thats why I made the video. Took some reasearch. Even though have to deal with the keyboard cowboy's who can't post any videos tell me how to do it.

[@vacantlott7244]

had tried two other methods and wasted a ton of time.this method worked out great.thanks

[@mobilemowers]

Glad it help i have some on bilding a 4.3 engine too. If you could at least like it. Helps get my videos out thier with youtube.

[@chillychilly7122]

FINALLY!!!! I just got finished with a 1998 Chevy 1500. Someone had changed the ignition switch and cut all the wires, I can't understand what they were thinking. It took me 5 days (a hour here and there) after Work to figure it out. If I didn't pay attention to this video I don't know if I would have figured it out. Thank you so much for posting this, it really made my day. The dealership is completely useless when I wanted to buy a printout

[@GOrdonGREENleaf]

Did this disable any other systems, like air cond, power windows, gauges, etc?

[@mobilemowers]

Nope.

[@JamieGarcia-ir6mj]

I'm more stupid watch you thats is just lazy why bother ther 19 yellow wires

[@SamsTowing]

Tried it on a 2000 blazer and it worked. Thanks.

[@mobilemowers]

Beats turn the key on for 10 miutes like 3 times and not working, then guessing resistors. :)

[@heroknaderi]

This video is very helpful. I drive a 2002 pontiac Grand prix and i will keep this in mind if i ever encounter this issue hopfully it should work it is also a Pk3 system.

[@jaystanley2827]

Before you cut any wires - Make sure you shut the door before attempting to reset - none of the resources I looked at included that essential tip. It was in the lead in to the video, second paragraph. Van fired right up - I only spent hours because I didn’t shut the door😱

[@Jeff-gs7uh]

Oh my God.... Freaking thank you!!!! I've spent 4 days working on my truck and had no idea I had to close the door! It worked 🥹🥹🥹🥹

[@williamjohnson5056]

Well hell I got a 99 Sierra Z71 so I don't know it sounds good . Cuz yeah I thought about getting another switch out of another vehicle, yeah, seen the program videos I don't know but, I've I've got mine to work into the start and ignition area so 😂 can take it out and get key code & make a key, I'll see if it'll program or not & if it won't my do that, good information there thank you & you have a good rapport give it up brother have a good one.💪🕊🍀🙏😏

[@Mr6duncan]

Thanks, it's been driving me F@#king crazy.

[@mobilemowers]

Thanks. All my research paid off for a ton of people. Simple as can be. None of that figuring out a resistor bs. Have a few other Chevy video's too like 4.3 stuff. Please like and maybe subscibe. Helps promote the channel.

[@rgrg3683]

💯correct, it relearns 0 resistance, 👍

[@benvenegas8708]

I'm gonna try it on my 99 suburban..thank you in struggling to get it to turn on

[@mobilemowers]

Some just mentioned try the thinest wire first. Been so long since i did that video which one of my most viewed.

[@THECDG999]

On my chevy colorado I replaced the sensor part ( the black plastic part ) on the ignition lock housing. Part # D1462G and worked. Not cutting wires.

[@jamesking3538]

THECDG999 that means your ignition switch was bad. This video is geared towards the actual security system malfunctioning.

[@THECDG999]

@@jamesking3538 it was the secutity pass lock. It wont start , it will take 10 min. After I changed the sensor, all ok.

[@jamesking3538]

THECDG999 my mistake, I read your initial post wrong.

[@CALB2009]

THECDG999 ~ Just curious, how much did your replacement sensor cost? Did you buy Part #D1462G "Ignition Lock Housing" then remove the sensor portion from the new housing, and swap out only that portion on your original parts? I can't find anyplace that sells the sensor piece on its own. Frustrating.

[@THECDG999]

@@CALB2009 $38.65 free shipping @Amazon. After you replace the sensor part, (black plastic), have to turn the ignition , won't start.. wait 15 min, turn it again , won't start.. wait 15min. And it will work. Truck need to recognize new sensor.

[@kareemhill1318]

98k miles is crazy for a junk car

[@leonelsanchez1154]

One question do you have to wait the ten minutes every time, or just the first time? Our problem is that we lost the ignition key and are using another key. Do you recommend paying for a locksmith to make another key or cut the wires like your video suggest?

[@mobilemowers]

Sorry I don't check comments to often. I'd did the wires like you saw so that's my only answer.

[@Makebuildmodify]

The bulletin says to start the vehicle with the switch contacts closed and wait for the security light to be on for at least 5 seconds. then the switch contact can be opened. In other words, you have to start the vehicle, wait 5 seconds, then cut the wire. But what if you can't get it started to do the process?

[@mobilemowers]

Did you even try and cut wires yet ? Don't recallthe bulletin mentioned cutting wires. If I recall when I did it years ago I just cut the wires without starting it as didn't have the orginal key t start it. Best of luck.

[@Makebuildmodify]

@@mobilemowers I did try cutting the wires first. No, luck with that approach. I ended up doing the full relearn process instead. You have to do the ten minute cycle three times in a row and that will reset the computer. Hopefully I'll not have to do it often. Thanks.

[@gabrielgopa9918]

Good video, thanks, but someone know similar steps for a chevy cavalier 99?

[@joelhernandez6278]

good x chevy✌

[@darenmiller2218]

Holy shit I have this exact same problem, exact same truck. You are so fucking awesome dude, thank you! This is my Bible for now. Lol

[@mobilemowers]

Glad I could help. Took lots of research to find it was that simple. Please like and subscribe. Helps with the channel.

[@dgc940]

Dang all the dumb questions asked in comments! will it work for this will it work for that! Good grief you answered and exsplained everything you knew and in easy to understand detail. One even asked if will work on a diesel truck OMG. If they cant understand what you said they sure dont need to be working on their ride.

[@mobilemowers]

Exactly. So many other video's say turn the key on 3 times but never work bs. Yea showed how to do it, exact truck it was done on, showed it working and with diagrams. Omg thier security light is on but now the truck works. Big deal. Remove bulb or tape over it. Thier welcome.

[@MissionaryForMexico]

Thank you, this appears to be a major screw up with gm engineers, among other stupid designs they have come with!

[@scoremxcom]

My shop say's it's illegal.

[@cantbsausedcardealer2697]

I worked at GM for 32 years. We constantly were asking if the engineers were just a bunch of drunk monkeys in a room full of parts and what came out was then mass produced...

[@zordonthevoyagesof577]

@@scoremxcom if illegal means my truck starts, then write the damn ticket.

[@ExploringCabinsandMines]

@@scoremxcom what's illegal please explain.

[@scoremxcom]

@@ExploringCabinsandMines That's what my shitty 'shop' said - the shops lie and steal, that why Dave Ramsey calls them the "Stealership".

[@rodrigosancho2940]

So im having this problem with my 04 malibu theft light is flashing no crank no start replaced every part but the passkey mod now the thing is your connector only has 3 wires yellow red black mine has 5, two green, black with white stripe a little space then red white stripe and brown should i go with the green ones?

[@mobilemowers]

As I replied to everyone and posted in the video I only know about 1998 or 1999 Chevy S-10 passlock removal. Also I did this one time and about 5 years ago. Yours sounds way different setup, car and year. Can always try that 15 minute key cycle. Maybe try some Googling, Facebook groups or forums ?? Else maybe someone else will chime in. Was some comments a year ago about another car if you read below.

[@dutchdon1512]

Please tell me that this will work on 1996 Chevy Caprice Classic!!! The car was running perfect. Some idiot broke into the car and stole the stereo system causing it to go into theft mode. I’ve tried everything. Willing to pay any reasonable price to get it fixed!!

[@mobilemowers]

Haven't a clue as you saw me do this for an S10 and I had the print out for that truck.

[@garyoldham4449]

look into Newrockies pro module permanent bypass. I just started researching it so I'm not sure yet It costs $260 so I'm going to look at it very closely. but it seems to be a permanent (good riddance) bypass for all of the different types of GM Chevy Isuzu anti theft passkey, VATS, and passlock systems. Then you don't have an anti-theft system anymore, but you also don't have an expensive horrible "I will act up on a regular basis" security system giving you wedgies when you least expect it. They claim a one hour installation. I think I'm going to say yes because I need to move my RV motorhome when check out time. The month is up. I've been trying to get this thing started for 3 days. The RV park owner was pretty awesome to give me a few extra days. They're not full up at this point. He knows I don't have much cash left. Damn I don't know what to do. I've got about $500. So do I repair the anti-theft system, get some towing quotes or order this thing bypass for $260? I was supposed to have this RV back in Georgia. I guess I should order this thing overnight shipping and spend an hour installing it and hope it starts. Unless there is something else going on too.

[@PsychoSiKS]

If you can get it to start, you can run the vehicle without the security CPU installed. Mine ran that way then I took it to a mechanic to get a gasket fixed....somehow they fucked up my security system again and I am back to square one.... I think I may be botching the relearn process.

[@MrMarcust25]

Will the remote start still work?

[@mobilemowers]

Only can tell you about the truck I did. I have no other info. Let us know what your found out. Sorry I don't check comments to often. I just do this for free to help people. Cheap KZbin

[@novakane510]

Any other solutions besides risking cutting wires. Seems like all videos say the same thing and doesn’t work

[@mobilemowers]

Some say a resistor. Think you order them by an assortment pack on eBay. Sure you saw those video's. But this idea worked great for me. If you got a 98 or 99 S-10 easiest way to go. I also showed you the diagrams. Cutting one of two wires at time is about easy it as it comes. Then butt splice the wrong one together if you didn't get the right yellow wire first.

[@nicholasschonerstedt2830]

So just cut that wire in half and no problems after?

[@mobilemowers]

Only issue I had was a security light on. You can even take that bulb out or tape over it. I had tried that security reset with the key on a few minutes then off then on three times for 20-30 times with no luck.

[@Goodsxp]

GM made a mistake with this security crap !

[@andyrivers9423]

it bought me a few minutes to grab the goof out of my drivers seat from hot wiring it. he did exactly this, yellow wire cut at the column nothing else, ignition forced. i had an aftermwarket alarm that stopped the fuel pump. saved my truck.

[@RockymountainRobert]

You still didn't explain how to wire it to get it to start? So do I just cut one of the yellow wires and leave them undone?

[@mobilemowers]

Hi, Yes cut one of two yellow wires on Chevy S10. Only one will disable the security system. Thought it explained it pretty clear as many people over the past 5 years have used it and never complained. Included copy of the wiring diagrams also. Enjoy

[@MarTheFella]

Will this work for a 2000 Camaro z28?

[@naymachavez4108]

Can you be more specific in wich yellow wire to cut please ?

[@mobilemowers]

I cut both as stated. I cut them at different lengths so I knew which one went where. So just cut one at time and see if that makes it work. If not patch it back up and try the other one. Only two yellow wires. I did link the service bulletin with diagrams and held the diagram I went off on the video. Pretty simple. All I can remember as did this a year ago.

[@raskull_]

I have an orange yellow and red. I know not to cut the red but which one should I cut the orange or yellow

[@hernandeza291]

@@raskull_ did u ever fix it??

[@russmarion9237]

Does this work for diesel?

[@mobilemowers]

A stated "It was a 1998 or 1999 V-6 S-10 pickup. I can not tell if this will work on another other years or models. I did this one time ever and years ago"

[@gradyhernandez4699]

There's a way to turn that security lite out there's a video out

[@mobilemowers]

Or just take the bulb out.

[@roltyd22]

@@mobilemowers black tape lol

[@donvalich49]

What's the title of or the link to the video to turn the security light out?

[@brucetiller2360]

2012 hd 3500 having problem now changed battery and nothing

[@mobilemowers]

Can't help you on this. I was covering later 1990's early 2000 Chevy S10 GM passlock systems as mentioned and I tell everyone that asks for other cars ect. Covered when it will turn over but not start and by cutting wires on these older beaters. Your 2012 is totally different beast and different issues. Following is a list by model year of the General Motors vehicles that have been and are equipped with the PASSLock Anti-Theft System. ... Chevrolet S-10 pickup 1997-2004 Chevrolet Silverado 1997-2004 ...

[@brucetiller2360]

Red and white,dark green, black and white brown got book on this model last night looking through it,red and white and dark green go to ecm under dash its company truck but one I drive did get it to turn over on fuse box but fuel switch don't think is activated.

[@kevint7994]

Lets pray it works on my 2002 express, relearn ???...

[@mobilemowers]

Relearn ? My video is called bypass. No clue about 2002 Express van.

[@TheSlashSlingingSlasher]

Will this work on a 2005 buick century

[@mobilemowers]

As stated I did this on a 1998 or 1998 S-10. All I can tell you as only did this one time and maybe 5 years ago. Sorry I don't check comments to often.

[@Robert-sh1ns]

My 03 security light stays on but truck runs n starts w no problem

[@mobilemowers]

Black electrical tape will fix that. :)

[@michaelknight9983]

@@mobilemowers ha . Black electrical tape

[@smokenbudesq]

BUT THE SECURITY LIGHT IS STILL ON

[@mobilemowers]

And yet your car / truck now runs. Your welcome.

[@gordonmurray5962]

Without a doubt the Passlock system is the absolute DUMBEST feature ever put on a vehicle.

[@jeremywhittington7605]

You’re excluding certain drivers… because, I’ve seen drivers that are far dumber!

[@mobilemowers]

Well you never heard them being stolen like Kia's with just a $ $ store usb cable.