GM / CHEVY TRUCK Pass lock vats Bypass security system

[@marvinrussell7763]

Thank you very much I do appreciate it. There has been 12 people look at this truck and ant got it going yet. But with your help I got it going in in 35 minutes.

[@jerryburnett1803]

Nice video! Just fixed my ‘99 Tahoe that would not start for anything. Now it starts right up! Thank you!

[@jamesbulldogg1950]

Thank you so much This was very helpful and very well explained . Thank you

[@IvanRamos-ok1id]

Thanks for taking the time in posting this

[@kamilfratczak3133]

Thank you. Everything you said I did and it started up. The only thing my SECURITY LIGHT was constantly only even after 10 min. It didn’t want to program. With ignition on I disconnect one plug from ecu and try to strut up then plugged it back in and disconnect second one and finally the light started to flash. Then I did the programming procedure and it started up. Thanks again

[@Strawberry-o9y]

Yes I am having the same problems with my Chevy trailblazer I am going to fix this tomorrow thank you you are now subscribed!

[@jimmiechurch6421]

Thank you for this video it starts every time now

[@joelmendoza953]

So it does work it does bypass the theft light?

[@greddmyles3677]

Don't fuc don't mess with that lol

[@Diamond4ava21]

I caught that too. lol

[@gustavodejesus4727]

😂😂😂😂 vídeo comes with warnings…

[@chief9161]

Good info thanks

[@DanielAranda-ct1jj]

Do yellow wire that's cut you tie into striped black wire where does other yellow go ,does it go to nothing

[@elmexicanbutcher9399]

I just bought a 1999 yukon with this problem hopefully it works tomorrow

[@northcarolinabluesman]

I have a Chevy HHR that is locked. I hope that trick will work on it.

[@JnRskaters]

Did it work

[@ushtemanushteunchaga]

Many thanks, good sir!

[@nestorroman2694]

Will this operation work if my Security light is solid On?

[@zaidsalah2659]

Will it work with a hummer h3?

[@williamwatson5822]

What Value of Resistor Did You Use....?? ( What #. / What #### K). Where did You buy it..? Or order it from...? We Need To Know....!! Thanks, Bill, in Los Angeles...,Calif. 10/15/23. Thieves Destroyed My 2000 Yukon xl Ignition & Ignition Housing...This is a Very Stressful, and Diffucult Problem...only Tried to Start,Then Dies....Please Respond...Thanks.

[@justinpigg1970]

No resister is needed

[@nestorroman2694]

2000 -4000 is recommended

[@JuanPerez-tf7lp]

You save my life

[@zacharyschools5399]

I dnt have a black wire I have a brown one tho

[@bigdaddy_TV]

Thank u

[@richardjimenez5346]

Question for 2008 chevrolet espress 2500 is different because I have this problem. Please you can help me Thanks

[@garyluckett4510]

😅 Good stuff...TY

[@onecastro3636]

Podra funcionar en una Suburban 99,

[@MoeOptions]

Ty

[@viralcloud2231]

I DID THE SAME THING G AND IT WAS PROGRAMMED AT LEAST I THINK SO, I CUT HER ON THEN 10SEC LATER IT SHUT OFF AGAIN, SOMEONE PLEASE HELP, IF YOU CAN FIX THIS ISSUE, PLEASE LET ME KNOW. PLUSE I HAD ALMOST USED ALL THE LITTLE WIRES THAT CAME IN A PACK OF 15 GM VATZ SECURITY BYPASS KIT, I REALLY DNT KNOW WHAT THE HELL IS GOING ON, I NEED THIS TO WRK FOR MY FAMILY, THIS IS THE ONLY SUV I HAVE FOR THEM, AGAIN IS SOMEONE CAN POINT ME IN TO THE RIGHT DIRECTION 🙏🙏🙏🙏

[@juanmartinez-hf4wg]

De qué valor es la resistencia ??

[@angeljosueromeroku6481]

Varia en todos los vehículos tienes que medir la resistencia que va desde 1.27 oms hasta 2000oms suerte amigo

[@montecummings946]

"Promosm"

[@OscarHernandez-rj1dl]

This guy don't know how to demonstrate nothing