Just want to say nice video, refreshing to find someone who makes a quick simple to the point video with proper visuals of bolt locations and sizes and tools needed for each bolt well done thank you for the good help!!
@nightbrando1115 жыл бұрын
ok pointers for whoever is watching this your going too need 1/4 inch (wobble)extensions of all different sizes especially long extensions 10mm 1/4 socket 15mm 3/8 socket for alternator a flex head ratchet is highly recommended a bend needle nose pliers with a slightly angled degree (not required but greatly helps with taking the electronics off via molex connectors) flat head screwdriver or prybar to (very carefully pry the valve cover) you cannot use a 3/8s extension to unloosen the bolts in the middle of the intake it must be 1/4s
@em0p0ny4 жыл бұрын
Along with torque wrench for manifold no?
@emanuelmanriquez957 Жыл бұрын
Very helpful I actually got stuck and I couldn't find anything until I came across this video thanks bro..
@jimmyr49602 жыл бұрын
Absolutely great video, the dry comedy just made it a perfect 10 out of 10. Very good job, thank you for posting this. 👍 just liked, commented & and subscribed. (With the bell 🔔 hit)
@tarizer44 Жыл бұрын
I love this video! 😂 when you say "what the f@#k!" When you have to take off the alternator . That made my day. Awesome job.
@nahnah67653 жыл бұрын
If you add a PVC valve with a new vac line on it you will never have to redo nor worry about oil again. I done this and it stop the factory EPA PVC from letting oil into the intake
@israelsilguero78043 жыл бұрын
I may have to do this job, I’ve exhausted all my other options and nothing has worked out. Swap plugs, ignition coil and fuel filter.
@theycallmekt5 жыл бұрын
Oh my god, so helpful. Thank you so much!
@masonkinard40653 жыл бұрын
Are bolts the only thing holding it in place? I have loosened every single one and it won’t move
@RG-wy1ol2 жыл бұрын
Very helpful 👍🏽 thanks for making this video 👍🏽.
@faustogarcia761 Жыл бұрын
Thanks for the video am doing it tomorrow
@alexanderthegrape537010 ай бұрын
GREAT VIDEO 😂😂😅
@josecavada38302 жыл бұрын
Very Good.
@danielraymadden5 жыл бұрын
Very good video, you think the harness should be replaced. 10 years 150k miles, I'm going to test my alternator to see if it is in good condition.
@MrEAG Жыл бұрын
You sound like a guy that is a mobile mechanic in Phenix city al
@angeldiaz17145 жыл бұрын
Thanks for video very helpful👍
@kylegreer23852 жыл бұрын
You the damn man
@nightbrando1115 жыл бұрын
also thank you for the video big thumbs up 😄👍🏻
@joseesparzamoreno11 ай бұрын
Como qitar la marcha sin qitar el modulo de admisión
@masonkinard40653 жыл бұрын
Which gasket did you guys go with? I’m looking but see so many different one!
@arielcastro3411 ай бұрын
Is it the Same on the 2016 Colorado?
@alejandrovelazquez23784 жыл бұрын
Thank u sooo much
@josecavada38302 жыл бұрын
Good.
@DavidRice5412 жыл бұрын
Thank you im hoping after watching this ill be able to get this sumbitch off I've been having a hell of a time
@THETRUTHb4u5 ай бұрын
Man your not the only one. I have been trying to get this mofo for 4 days now. I'm so fukn sick of taking off more and more things. And moving more things and loosing more things. Just to find out it's not that easy to do these things on the video. Matter of fact if it weren't for the tool arsenal I had this job would have been next to impossible .
@davidvenstra50562 жыл бұрын
ha ha, bank 2. Funny
@danielraymadden5 жыл бұрын
When should coils be replaced
@michaelroberts79174 жыл бұрын
Man u sound super annoyed lol ive done it about 300 times and i still hate when they come in to do anything try a starter
@adamdport3 жыл бұрын
I'm thinking of taking on the starter. How much is left to remove the intake manifold?
@THETRUTHb4u5 ай бұрын
I need help please. I think I'm missing a bolt or 2 on intake manifold. Wherr the oil limes are freed up. Then what plate where? I SEEN YOURZ. but where did it come from..don't just point at it tell me where. OK EDIT: Finally got the plate moved over and then used a 1/4 deep socket to access the two wayyyy up there. You know the more I do this the more I think they did not need half this crap. And they did not need to put half this crap where they did.
@THETRUTHb4u5 ай бұрын
God I wish you were here to walk me through couple parts of this stupid ass thing. I'm getting so freaking sick of messing with this damn 07 colorado.
@30guarino4 ай бұрын
@@THETRUTHb4u How did you end up making out on this project?
@lopezautotechtips5685 жыл бұрын
How much did U charged customer?
@chrissport163011 ай бұрын
Pos engineers they make the simplest things that can take 20/30 mins a 3 hour job just so you can take it to the dealership or shop and not do it yourself
@tylermartin2631 Жыл бұрын
Easy money🤣
@averagemyke2843 Жыл бұрын
You didn't show how to open the hood....im stuck. Son of a...
@ptown503jb Жыл бұрын
😂😂😂
@anarky43214 ай бұрын
one of the worst designs ive ever seen... what a joke...not doing it