GMC Sierra 1500 Loud Noise Coming From The Starter and Flywheel ( Fixed)

This is a 1999 GMC Sierra 1500 with a loud noise coming between the starter and the flywheel. Easy fixed by just unbend the plate between the fly wheel and the starter.
Como arreglar el ruido que viene de entre la marcha and el aro de la transmision era solo la lamina o plano que estaba chueco y estab topando con los dientes del aro.

[@mitchellmccall377]

I love the part where you say, " maybe we don't put the plate back on, we not gonna worry about these minor details " lmao

[@futureleader5000]

Thanks man ! I changed a starter....truck ran fine when everything was warm in the day, I left the truck over night and the metal cooled down (-10 canada) and when I started my truck it sounded like the crank was knocking...lol..found out after all it was just the fly wheel cover / flex plate hitting my fly wheel

[@forsheepsakes]

Thank you my friend for making this video. I have a 1993 Chevy S 10 pick up truck that did the same exact thing. I change the starter and got a horrible knocking noise out of the engine. I will take this cover off right away. Thanks again.

[@isidrogarcia9839]

Exelente video cambie mi starter y quedo ruidoso thanks me suscribo

[@miguelhorta5694]

Gracias maestro chingon

[@campokid1pr]

Gracias por el video. Mi papá tiene una chevy pickup cheyenne k1500 Motor Vortec 4.3 litros V6 con un sonido fuerte que proviene de la volanta. Ya tengo una idea de como trabajar el problema

[@bigdog8748]

Great video 👍👍

[@dominicmaxwell2225]

Awesome video amigo, dope , keep it up

[@michaelmagyar5734]

Nice smooth engagement after you fixed the bent plate! All starters should sound like that!

[@RescueMoversDFW]

yep thanks

[@Bernabe_gaming]

About to try straight out the plate see if it works

[@kylenunnelley1482]

Did the starter being missed position did it cause lag of power in the truck

[@carlitosse.5606]

Muchas gracias por tu video camarada!!!

[@prosurferwaves6195]

Great video !

[@RescueMoversDFW]

Paul Fahey thanks

[@Person-mx7ld]

What size are the cover bolts ? Mines missing them

[@salvadorperez6031]

gracias por compartir tu video voy a ver si es lo mismo en mi camioneta.

[@RescueMoversDFW]

Salvador Perez claro que si , saludos

[@Pedro-cq4yo]

Eres un chingon

[@RescueMoversDFW]

👍

[@sab9667]

Thank you thank you thank you!!!!!!!

[@andymartinez482]

Good shit my boi

[@Livemusic1800]

Help. My 1990 truck makes a similar cracking noise then shuts right off. ??? Help !!!

[@blackobs2535]

Could you show us how to remove that

[@dannyboy7761]

Thanks this really helped! On my 2013 gmc

[@dross99]

having the same problem on my 2013 silverado, did it end up being the starter? bought my truck from a dealership and it happened the next day, family mech said starter?

[@NORCALPYRO_]

​@@dross99ever figure it out

[@Bonkbowow5]

same procedure for a 1994 gmc extended cab?

[@andrewjames2569]

"Can you hear that noise"? I can't even here the faintest idling of the motor over that racket lol.

[@moroccocerrito2758]

Yuup it was also my shield I took the 2 bottom bolts out bent it back and put the bolts back and no more loud rubbing noise

[@jesusramirez2275]

Carnal ese ingles se oye palado de la verga!! Jajaja pero pinche parote ke me iso compa mirando su video aregle mi troka 👍👍 gracias!!

[@drwombat]

El ingles es passable... No nos importa nada

[@princevegeta8901]

Is this truck still running good today with no issues? Just replaced my starter on the same vehicle and it makes this exact noise.

[@rocconevercappin9933]

Is it runnin good now ? What did u do my mustang is doing same noise sounds like rod knock but moms bf said it’s flywheel

[@cjmjourney]

Just remove dust cover on transmission and inspect the flywheel from there

[@JiggyShotz]

My truck has that same noise but it comes and goes makes no since? Its a 92 k1500

[@LuisGonzalez-nn2cf]

rapid shot17 ever figure it out ?

[@manuscus6289]

Sounds like the starter gear isn’t pulling back stuck???

[@mylifethaidiy7045]

My starter failed on my 2003 Chevy 2500HD 6.0L today in -18 degree weather. I just replaced the starter and started up the engine and I have the exact same noise. I thought the bendix is permanently stuck in the flywheel, so I shut it off right away. I will pull that shield and check tomorrow.

[@mylifethaidiy7045]

I ended pulling the new starter and installed the old one and then it worked fine. Put the new starter back on and works good now. Something must not have been lined up or 2 wires maybe touching.

[@swampdonkeyofficial7417]

had the same noise in my truck, 93 k1500, but it didnt move when put in drive. did this truck move in drive?

[@RescueMoversDFW]

Swamp Donkey Official yep

[@erikramirez3576]

Have you found your problem my truck made the exact same noise but it didnt move either

[@cjmjourney]

You need to inspect your flywheel and torque convertor for the bolts being broken or cracked

[@bigboyinthe5016]

.....having noice in that area a bit......no where NEAR that bad.....but when I put this engine in my 98 I forgot some thing.....forgot the damn threadlocker blue on flexplate bolts.... Torqued them to spec and forgot the damn threadlocker blue. Smh. About to look into it but I figure bolts are backing out and thats my issue... Hope they didn't get loose enough to crack the flex plate....have an extra but shit man...... I don't wanna change that crap....... DEFINITELY not running it till I get it right though thats for sure....this engine is fresh and I don't exactly want to rebuild it again.

[@EarlGuyton425]

I know what that is.Earl here with 50 years experience.. Remove the starter because your bendix starter gear is not releasing after you start your truck. Problem is your starter BENDIX

[@mototoad1242]

Earl, you wearing lipstick my guy?

[@youngsick6091]

My 99 tahoe is making the same exact noise im goin to see if its that metal plate 🤞🤞

[@plugger4945]

Does this plate have a name? Flywheel dust cover,maybe. Please give a name,thanks.

[@cjmjourney]

That is your transmission bellhousing dust cover

[@A.Wild.Yamster]

@@cjmjourney thank you

[@cjmjourney]

THIS IS NOT THE ONLY SOLUTION! Also ensure that your flywheel bolts are tight and ensure your flywheel has no visible cracks in it. The ticking could be a precursor to more serious issues.

[@wickedlokz1849]

Mines was a bent plate between the motor and fly wheel

[@Dollarblk11]

My truck is doing the same thing as we look at this video

[@elissabradbury5375]

Esa lamina se la puedo quitar permanentemente oh la necesita ? Gracias

[@RescueMoversDFW]

Puedes quitarla

[@elissabradbury5375]

@@RescueMoversDFW Gracias

[@tx.q.b.k.5124]

Known problem for these trucks an suburbans so it's not the lifters or starter it's the flywheel save your money an replace it first but like me I do both just because...ac delco parts all day

[@RescueMoversDFW]

Tx. Q. B. k. 512 yep

[@mosthighchosen614]

So, on average, is it usually that the flywheel itself should be replaced... or just the cover? My 96 Tahoe is doing the same thing, but not nearly as loud... Only when I accelerate. Two mechanics I went to, both said that they know the sound is definitely coming from that area, but couldn't pinpoint the location. They both told that there would need to remove my exhaust in order to get drop the pan and get to the sound. The problem is, the bolts are rusted on and they say that can't remove them without possibly breaking the manifold, which would cost me more money for them to repair that if it happens. I just wanna be sure of whether I should get a flywheel or just a new cover?

[@RescueMoversDFW]

@@mosthighchosen614 just the cover

[@mosthighchosen614]

@@RescueMoversDFW Ok. Thank you. Well, I know that it surely seems like that's the problem... I just don't know why it didn't cross either mechanic's mind to look at it. One of them even specifically told me that when they start it up without the cover on, it doesn't make a sound, but once they put it on the sound returns. It even seems a little louder now, since they removed it and replaced it.

[@mosthighchosen614]

@@RescueMoversDFW Is this warped cover due to excessive heat, like normal wear and tear? I'm in Florida, by the way... so it definitely has its hot days. My rotors and wheel hubs always end up warped somehow.

[@antoniocl75]

Ami me pasa algo similar pero es como 2 segundos en cuanto la prendo pero luego luego se quita el ruido algúna idea sobre eso amigo?

[@RescueMoversDFW]

hay que checar de donde viene el ruido y quitar partes pa checar

[@antoniocl75]

Daniel Rescue Movers muy buena idea muchas gracias por contestar ✌️

[@valentinsanchez6854]

si le hayo el ruido a su troka @antonio castaneda

[@alexjones5133]

😎

[@Boatdog357]

Give it a few red line revs it may quit. 😆 🤣 😂 lol

[@louislongee9472]

Yup

[@giloli5862]

How’s it running now? No noise free?

[@RescueMoversDFW]

Like a champ

[@99gmcsierralm74]

Replaced the starter n flywheel and it completely went away.

[@kylenunnelley1482]

And burning smell and shuttering

[@chewybrand238]

My wife made a noise like that, so I divorced her!

[@jkash56]

Chewybrand lmao

[@USMC-Sniper-0137]

LOL!!!!!!!!

[@brianb7556]

I second this but we dont divorce the trucks lol

[@clearwater9118]

That cover didn't bend by itself. It may have been done on purpose to make you go back to the mechanic and pay more money. Or it got bent accidentally while installing the new starter. But i don't see how its possible to bend that by accident. 🤔🤨😏

[@BIGMAN8435]

Some of those truck use a shim for the starters..

[@FNunez-ec5ug]

orale' Vato, tu si saves'..... good job, the job is tracking the shit down, then get it done....👍

[@FNunez-ec5ug]

btw, im working on a 83 c10 scottdale square body, just swapped the rochester quad to edelbrock 1406, now i just got to tune it in better running ritch, i think i figured out wich vacuum connections can go. later bro....

[@pnutbuttajelly1049]

oh god turn it of its killing the flywheel and bendix there not inline

[@user-vi4qx6md1p]

Why are so many of you still diagnosing this problem ??? This video is SHOWING YOU THE SOLUTION FOR A LOUD NOISE CAUSED BY A BENT FLYWHEEL DUST COVER !!!

[@danielbeckstead9985]

Your flywheel is chewed ur or your bolts from the torche converter are loose

[@clearwater9118]

That was not the case in this video. Did you watch until the end?

[@bigpoppardz4663]

My truck did the same but now the engine don’t even go anymore

[@RescueMoversDFW]

check if the srarte r still good first, and then check the conexion to the starter

[@bigpoppardz4663]

Daniel Rescue Movers I did I took the starter off and tried it on and it did but I put it back and engine won’t go my truck made the same noise but now it won’t go at all

[@takuame7]

@@bigpoppardz4663 I know this is a year ago but I hope this helps. Mine has the same issue recently, damn thing wouldn't even start anymore until I had the idea that it was the flywheel/flexplate what ever the big flat gear is called that the starter engages with. I put my truck in drive w/out cranking the engine then rolled it a little bit by pushing to rotate the flywheel. Turned my truck on and it cranked with some ugly noise but turned on and was able to drive it. Look into that flywheel I know ima bout to have to.

[@garthkey]

Oh, well mine stops after the starter is done

[@nikolageorgiev637]

7min of video just to show us the noise of the car. Mostly of us probably watch it the first min.

[@cjmjourney]

I think he was attempting to locate the noise as well, and just because you may not have needed to see it, doesnt mean others didnt.

[@user-vi4qx6md1p]

You were obviously on here looking for help, right ? Of course, you were so be respectful to the people who take the time to post videos like this to help us all.

[@Unknown-dc3wm]

VIVA MEXICANS

[@lilmalino13]

My truck is doing the exact same thing they told me it’s the fly wheel