GMC Sierra Dash Mount

Bulletpoint Mounting Solutions dash mount installation in a GMC Sierra. This heavy duty dash mount can handle phones, GoPro cameras, and even iPads. RubiGrid™ GMC Sierra + Chevrolet Silverado Dash Mount

[@itsallaboutshelby]

Thanks for the video. I ordered one of these today for my Sierra 2500HD. It’s a little different but close to the one you have. They call “Rubigrid”. The lower portion fits the entire bottom section so you don’t have to center it. Also, it didn’t include mounting tape. Probably because it fits so well now and it mounts with 6 bolts vs 4. Also, I left the rubber cover on it. I just drilled right through it and it’s SOLID. Thanks again for the video and instruction. Good stuff!

[@mikesidden]

Hey ya'll. I just order this Rubigrid insert for my 2019 RST. I agree that having the top slot open and exposing the mounting hole would look ugly, so I found a couple of inserts on Amazon made by a company called TufSkinz. The product is called TufSkinz Dashboard Top Cubby Foam Inserts. You can use just the top one or you can affix the bottom insert over the grid of the Rubigrid, minus what you're mounting, to avoid dust and debris from getting down inside it. Just my two cents. God bless.

[@katrinagwen]

Well done on this informative video, thank you.

[@canada233]

Put tape on first, then drill holes.

[@jayer-su3hu]

Just a note for anyone with a Silverado. I have a 21 RST and the bolt in mine is in the FRONT of the "tray" and said "tray" IS NOT REMOVABLE on mine. I have no idea why this is. And I have no idea why there's a screw there if the tray doesn't come out. So I don't see this working on my truck

[@hathawaywego]

I want one of these so bad but they don’t have it for our year/model! Must be time for a new truck! 😂

[@Kanjo16]

How much trouble did you have getting the shim in the crack to take out the piece? My 7mm bolt is further down than yours is and that came out ok but I can not get the darn pry thing in there to pull it from the clips.

[@anthonygasparini1734]

The manufacturer should provide a template for their mount. For $86 bucks, come on!

[@CHRISONELUNG]

It’s been a year how’s it holding up?

[@johnrice9121]

How do you clean under it

[@scottrobello]

Looks ok but then after removing the tray you have that ugly screw hole left there without being able to put the cover tray back in