Hook Up Your Dash Cam or Radar to Your Mirror!

[@Donslife]

I purchased 2 harnesses from Gen5DIY.com They may ask for your VIN to confirm compatibility www.gen5diy.com/collections/1... linktr.ee/donslife - Links to all of my products and discounts

[@campbellcolt45]

I added these same harnesses in two Silverados, a '19 and a '21. They are great! I kinda wish the wire between the two connectors on thier harnesses was a little shorter. That would have made tucking in those wires a lot easier. Other than that Gen5DIY makes great products. My '19 has had the harnesses for that radar Detector in it since 2019. So I can confirm that they are made to last and I have had zero problems with it since install. Another note for anyone trying this, that small plastic piece in the middle Don took out last, should be the first piece popped loose then the sides pulled out. I used a similar pry tool up by the headliner to pop the middle piece out then the sides come right off. Great Video!

[@Donslife]

Thanks for the tip! I went into the install blind

[@mrjeff2396]

I’ve been using the Dongar DashCam Power Adapter for several years in my vehicles. Highly recommend coming off the Rear View mirror for power to totally avoid the airbags in the A-Pillar.

[@myrtlebeachhomepro]

This video just made my life so much easier!! I just purchased a 2023 AT4X and have been trying to figure out the best way to power my Escort 360C and well..... you answered that question! I've been watching all of your videos and will continue to watch. Thank you for all of the great content! Order for my Gen5DIY harness has been placed!

[@Donslife]

Sweet! Sorry I don’t have a discount code or anything for you. But either way, the product works!

[@zachstenson8307]

@George Smith let me know how you get it mounted. I'm doing the same thing but I'm trying to figure out a solution with the escort smart cord.

[@myrtlebeachhomepro]

@@zachstenson8307 mounted it using a BlendMount and with the plug and play wiring it couldn’t have been any easier. It’s a very clean look. Definitely recommend!

[@zachstenson8307]

@@myrtlebeachhomepro Do you have the mute button? Where my radar is mounted with the blendmount I don't have access to the button on top of the radar.

[@myrtlebeachhomepro]

@@zachstenson8307 I have to use the mute button on the detector.

[@jamesaikens]

I just ordered one of these for my 2017 Escalade. One thing I would like to mention is that if there is a constant 12VDC+ at the plug, it would be nice to have a 3-wire bare lead as some dash cameras work with enhanced features when given Constant, ACC, and Ground. I might get out my power probe when it arrives and fish for it myself.

[@bigdawg901]

Omgoodness thanks Donslife ....I've been looking for a harness for bel radar detector for my 2022 gmc sierra, went to Gen5diy found what I needed also gave them the Vin number shipping was very fast couldn't be happier with a clean install thanks again DONSLIFE 👍 also the cover for the mirror was point on becareful with the little tabs 👀

[@Donslife]

Glad I could help

[@alanstansbery]

I love the install, but I think it woulda been better with a follow up of the video capabilities of the dash cam with the side mirror capbilities !!! still you are great at what you do!!!! love your video's!!!!

[@hdrolling]

I don't think the dash cam interacts with the trucks stock 360 cameras......

[@Donslife]

@@hdrolling correct, the are incompatible systems

[@gregockman7259]

Couldn’t tuck wires in 3hrs , watch video 15 x , you made it look easy, can’t see where you tucked big box in to tie wrap . Appreciate the videos,,done a lot of your mods

[@elkhornpetersen1894]

Nice, I might ro get that for my garmin dash cam

[@MrHelipilot]

I’ve got the same harness, but their Canadian shipping is insane!

[@Donslife]

I asked them about that when I ordered. They gave me some better options

[@DuraMaxDieHard101]

great video I am going to order one

[@ericgeier4525]

Do you know if this harness would work for a 2016 Tahoe that doesn't have the screen mirror? Im looking to add a cam without having to run a full cord around the car.

[@JeffreyKowal-rt4rv]

Do you have a video showing the install of your dash camera on your Sierra AT 4?

[@Donslife]

Here is an oldie. Not sure if it what you’re looking for: Nextbase Dash Cam with Rear Camera Installation and Comparison. What's Best for a Truck? kzbin.info/www/bejne/hHvGiZJqqbFmmcU

[@JeffreyKowal-rt4rv]

Thanks for your reply. I subscribed to your channel and found it about an hour ago. My AT4 is a 2023 and the dash camera is Nextbase. Already installed in my X5. Bought the hardwire kit from Nextbase. The fuse box has a several fuse locations “not used”. I’m assuming I can check to see if they have power to one side and then use one of those. Otherwise I’ll just use F26 which is the UNS charger. Going to hook it up in the morning. Have a great night.

[@jodieclark886]

I have a 2023 GMC Sierra 1500 SLE. With a rear camera, I would like to put a front camera on it. How do I do it? Also with the tailgate you have to have your keys in your pocket. How can you stop that? And just open it up regularly.

[@azizo2324]

Hi there, What kind of dash cam do I need for this wire on my 2023 escalade? Thank you!

[@Donslife]

I would find a Dash cam you like first and then order the right cable option

[@michaelryckman2578]

Love your videos Don! Question for you. Would this work in my 22 Yukon Denali if I dont have the rear view camera mirror? I am wanting ot install a dash cam. Thanks!

[@Donslife]

As long as your mirror receives power, it is likely compatible, but you’d need a different harness. I left a link to their website in the video description

[@dude...are-you-sure]

Stupid question here, the harness allows you dash cam to draw power from the video cam mirror?

[@Donslife]

Yes it does

[@cortezfisher4723]

Hey the dash cam you have do you think the plug in play they have on the website would work instead of taping into the cigarette/lighter port? Like you did in your other video. I have a 2024 GMC Sierra 1500 elevation x31

[@Donslife]

I think so as long as we’re talking about the same dashcam. They have adapters for my Nextbase dashcams but not my Thinkware ones.

[@StevenS-n6p]

Will this work for a dash cam since most are 5V? Doesn't look like there is room for a 12v to 5v adapter in the mirror housing.

[@Donslife]

Usually you just pick the right cable for 12v or 5v, and the right tip. The have a selection for each technology

[@markw9699]

my question would be constant power to the dashcam? I am about to install a Thinkware 1000 and it requires constant power for a parking monitor mode…is this cable ignition powered only?

[@Donslife]

Depends on the vehicle so you may want to test the circuit beforehand for constant un-switched power. I have a thinkware hardwired in with their kit to a fuse panel. This was the best option for parking mode. Some dashcams like Nextbase have capacitors for a small amount of use without access to power.

[@markw9699]

@@Donslife Well this truck is going in Tues for these cams to be installed so I will see how it goes and where they tap power from what fuse box for it. I also have a 2021 Yukon that I will add this camera and I will most likely do that install myself...thanks for the great videos and options

[@Drone025]

@@markw9699 did this work for you? I have a ‘21 Tahoe with auto dimming and I was torn between the thinkware and the blackvue bc both are 12v. I ended up buying the blackvue dr590x but it doesn’t turn on when I hook it up to the gen5 connector. It only works when I hook it up directly to the charging outlet so I know the camera works but something with the mirror/gen5 plug is not…

[@welding2go]

Great videos! What radar detector are you using and your thoughts on it?

[@Donslife]

Radenso Pro M. I plan on reviewing it on the channel when I return from a car rally

[@b-rad-1692]

Does GM make a dashcam that’s built into the mirror?

[@Donslife]

Not that I have seen. The closest so far is the Performance Data Recorders on the Corvettes can do continuous recording from the front camera when the vehicle is on

[@mswaghorn]

Hi, do you happen to know whether this is possible in a 2016 BMW F83?

[@Donslife]

Mirror Tap - Universal Install - No More Messy Wires! kzbin.info/www/bejne/a2OXYmadhMh0nNU I used this on my 2015 F82

[@mswaghorn]

@@Donsliferight on! Thanks. Perfect

[@Papa_Jib]

Would you know how to hook up a camera to the android Box that plugs into android auto Apple Apple car play

[@Donslife]

You’d need to find an Android box that would allow a camera to connect to it. I could see a usb cam being connected but then you’d need software to control it. Might not be worth the effort. Maybe a company will develop a plug and play solution

[@EliteEventAZ]

These are cool but at a premium. $105 plus shipping isnt cheap. These really should be half that cost. for $100+ ill wire it up traditionally.

[@SteveSwedish-wk5qm]

How do you mute the alerts on the detector?

[@Donslife]

It depends on the model but mine has the ability to adjust sensitivity for every band, turn then off completely or silence with a push of the middle button. The owner’s manual should tell you how for yours

[@SteveSwedish-wk5qm]

Thanks!!

[@Raj-sr5jo]

Hey big guy who do i talk to to order one of those harness can u send the link plz

[@Donslife]

Gen5DIY.com

[@Raj-sr5jo]

Thx big guy u rock .

[@rgv_sixspd2543]

Can that same plug connect to the dash cam ?

[@Donslife]

Same installation but you have to order the right one for your specific dash cam connection

[@davidryder5082]

@@Donslifenice work Don. Any idea if this could be added to my 2023 c8. I bought the 1lt and it's not on my rearview mirror. Only option I wanted but didn't want to spend another 5 thousand for the mirror. Great info

[@joedrazic6764]

What kind of radar detector ??

[@Donslife]

I am using a Radenso Pro M. It uses the same size plug as some of the Cobra’s

[@christianmercado5347]

Any for ford

[@Donslife]

You bet - several options : www.gen5diy.com

[@gk9417]

👍✌️🇨🇦

[@jifchosehismother]

misleading title

[@Donslife]

Did the compatible Cadillac or GMC in the thumbnail mislead you? They have universal taps too but the mirror has to be power equipped.