Street Racer Camshaft VS Turbo Killer Camshaft - VY SS LS1 M6, VY Calais LS1 A4 Idle Video

[@spudsmckenzie4123]

It would have been better to hear both start up separately versus one starting up after the other. But still a great comparo video that gives a great indication of the differences.

[@joelrobinson5436]

I would really like to see a 'living with' kinda video regarding the different cams and maybe what suits a manual vs an auto. Keep up the great work, always enjoy the videos!

[@RicksWorld91]

I've lived with ny turbo killer cam for 4 months now behind a t56 ls1. Easy to drive, bit annoying in traffic but great to drive otherwise

[@snrautoworx2840]

Iv got the VCM11 cam and love it! But the sound of the TK Cam is insane, i love the chop chop!

[@GMMotorsport]

Cant beat the sound of the TK!

[@solomonangus2804]

@@GMMotorsport well my cam is very similar vcm 13 238 242@112 but I run 3 cat deletes 3 cat back rear hot dogs instead rear mufflers

[@freddienz68]

@Solomon Angus Would love to hear your car. Put a video mate 👍

[@ls1hinchy546]

Both cars have a awesome set-up but that SS is music to my ears👍

[@BobbyBrown-sl7zp]

Maybe cause it has no rear muffler ,take rear muffler out other car replaced with hotdogs a world of difference

[@cryptolord9826]

Man I miss my big cam ssz

[@grahamerosewarne6656]

Really just a exuast difference. They both sound like a good cam selection.💨🔥👏💯🤟

[@spawnneverland5334]

Thanks for the great vid. Big sound difference, both sound great even on cold start

[@chriskubond6314]

They both sound beautiful

[@hot355clubby]

What were the power outputs from both cars? Love your work guys

[@GMMotorsport]

both cars made over 300rwkw

[@vongdong10]

Sounds identical to me. Everyone wants a big cam chop but most don't realise a big cam is not much fun on the street.

[@VanPelt01]

Like the sound of the TK but realistically the SR is going to be better for a daily.

[@solomonangus2804]

Depends set up tune etc .mines vcm13 fine for daily 4 K stally 411s can hardly tell it's stalled loads torque

[@Commander-24-u5t]

Street racer cam 😍🔥🔥🔥

[@stinkfinger1942]

SR 1:12 TK 2:05

[@azq3ct997]

my dream holden 😍

[@kimboDragon]

wow high lift on both so skimming the head and or decking the block could be an issue with out flycut pistons ? GMM Street Racer II Camshaft Specs The GMM Street Racer II Cam Specs are as follows - Duration 231/243 Lobe Separation @113 Valve Inlet .617" Exhaust .623" GMM Turbo Killer II Camshaft Specs The GMM Street Racer II Cam Specs are as follows: Duration 237/243 Lobe Separation @112 Valve Inlet .620" Exhaust .623"

[@lukedorrington9712]

Tuff idle means very little. It’s no gauge of power. As has a nice fast idle. Both sound good.

[@sirelijahtuhua9622]

Nice and what was the power difference

[@trg3761]

Both sound nice but I'm leaning to the SS. purely for the deep sound.

[@stinkfinger1942]

That's purely the exhaust set up, bro. The TK would sound sweet with the SS system behind it.

[@scottfilshie661]

On the Red SS, what is the location of the hotdog mufflers? Are they front or rear? Old mate says the system is 2&a 1/2 with the hotdog mufflers option from XForce.

[@craigdallimore4396]

Would both having different cams and cat backs mor for alot of difference in power output.

[@clintcameron8962]

Can you guys do the different between tunes next on them

[@MrPezzaaa]

im looking on both web sites and i cant see where the Street Racer Camshaft package is or what the packages include

[@nathanparkin5486]

How do I go about getting the right heads for a cam that the company won't give specs?

[@GMMotorsport]

Cam specs are available here australiaspeed.com.au/engine-parts/camshafts/holden/

[@petebeat1510]

What is the drivability like on these to cams?

[@paytonruss55]

The Turbo killer cam sounds nice and grumpy. Does anyone know if they ship these cams, heads, fronts, cats to NZ? Il check online now.

[@russcole5685]

Did you find out

[@reihanapore2342]

Yes they do, I have the TK cam set up in vy ss

[@Marcusdemakis]

What bootlid spoiler is on the red ss ?

[@reihoro3457]

How much for the turbo killer cam kit sent to 2770 NSW

[@haydenj2931]

Red SS looks better but the Calais sounds better

[@rollajay5301]

Im sorry i tried to listen to what you said, did you say lucky for these old schools we dont have to put the clutch in 😂??

[@Tonyclifton-q4f]

how do i bump up idle ,since mechanic fitted cam its so damm lumpy at lights it surges real bad ,3500 stall and mystery cam,i took it back a few times and in the end he said I need to drill a 8mm hole in the throttle blade and stop complaining to him ,originally went in for worn lifters and it escalated from there ,camshaft ,hi stall ,timing chain oil pump etc etc about 9500 dollars ,i just want the idle up a bit so i dont have to put it in neutral at lights ,any advice appreciated

[@summers346]

You need a new tuner. Drilling a throttle body to rectify idle means they have not done the job correctly. That may be intentional or that may be from insufficient knowledge. Either way id be going elsewhere for a retune. Other tables may be wrong too

[@solomonangus2804]

Try new IAC 1st

[@trixnhoez2964]

I always hear it's not reccomended to drill the throttle body but I took my car to one of the top LS workshops in the country for a cam and some work and it came back with a hole drilled. Cars driven brilliantly for 7-8 years since until I spun a lifter. Considering the fairly wild cam specs the drivability is a lot better than expected so from my personal experience a drilled TB may not be the worst thing in the world. Just my opinion.

[@stinkfinger1942]

Get it tuned elsewhere my dude.

[@solomonangus2804]

Yeah he sounds like a jerk who has no idea ..go see a real tuner who don't drill holes

[@chaparke735]

nice vf in the back tho

[@davydoo81]

What’s the fuel consumption like?

[@Aaron.13]

If fuel consumption is of any concern you would not buy a heavy car running a crammed v8.. it takes fuel to make power

[@davydoo81]

@@Aaron.13 ohhh that’d be why 10 second Barras can get 8L/100km on freeway! Silly me!

[@ogeethunder6768]

How do I get the turbo killer

[@GMMotorsport]

australiaspeed.com.au/camshaft-turbo-killer-ii/

[@bumpngrind1212]

n a soundz meannn

[@streetheat3366]

The red SS sounds better.

[@hoonaticbloggs5402]

Couldn’t hear each one separately 😫

[@johnsonwithat2322]

Barra killers for sure 😂😂

[@boris9331]

Doesn't clear it up at all post some dyno plots back to back of each car or some footage driving each car and commentary as you drive , how it behaves on a auto and manual car hopefully you can educate your customers best as you can as this stuff people only find out once they've had the time and money and owned numerous cars + money spent which I personally think is unfair.

[@DonnyDRacing]

They sound pretty good but i call bullshit on the power level they reckon they are putting out

[@akaitv6606]

None of those would scare a barra

[@trixnhoez2964]

Gtfo barras are hardly some mythical unbeatable engine

[@raybrookevisnorris346]

I thought Barra was a fish.😂😂😂

[@Stolencamaro]

Sellin ve ss 400hp

[@brianross4057]

Steam out the pipes not smoke.

[@pauledwards6446]

I learned nothing from this video , I am now dumber

[@clayjones4105]

lol turbo killa

[@tezzasbigbuz3933]

Sound too tinnie

[@clubsportr82001]

thats the crappy xforce exhaust systems...

[@solomonangus2804]

Pfft I have new xforce nothing tinnie about mine with big cam cat deletes rear hot dogs instead rear mufflers

[@cancan8467]

All that and couldn’t even give HP comparison grrrr

[@robertjeffery4664]

Sound is fucked so a waste of time watching it at all

[@iamasmurf1122]

People waste some serious money on cars

[@Aaron.13]

It’s not a waste to spend money on something you enjoy..

[@makeyourself1984]

People waste some serious comments on videos. If you're not into cars , jog on lad. Go buy some new earrings for yourself.