Godox KNOWLED M600D EVERYTHING! + Fresnel + Barn Door (Indexed chapters)

The Godox Knowled M600D review and workshop is straight to the point, have a wealth of information, beyond the item itself, also sometimes a mix of tutorials regarding lighting, audio etc, EVEN some workshops mixed with the reviews themselves.
Disclaimer: This review and its content was not reviewed, subject to any approvals or paid for by outside persons or manufacturers. I wasn't paid to say anything, nothing scripted, or controlled. [I received this product in exchange for my honest review].
I'm a participant in the BH Affiliate Program and Amazon Affiliate Program. Links here below are affiliate links and won't cost you anything extra, but I will receive a small commission if you use them to make a purchase.
Links:
Godox Knowled M600D Daylight LED Light bhpho.to/3N5Uwk0
Godox FLS10 Fresnel Lens bhpho.to/3udYyhD
Godox Barndoors for FLS10 Fresnel Lens bhpho.to/3JvnLdN
Godox Knowled M600D Daylight LED Light amzn.to/3Jmmwh3
Godox Barndoors for FLS10 Fresnel amzn.to/36icpLP
CASE for the barn doors! Fits PRECISELY amzn.to/3L3BVU6
00:00 Intro
1:44 M600D in action samples
9:59 The CASE and contents
13:26 FLS 10 Fresnel CASE and contents
14:17 Found a CASE for the barndoors! Almost custom made!
14:49 The BALLAST and CAUTIONS you should KNOW!
18:48 V-Mount installation and limitations
20:01 FLS 10 Fresnel (continued)
23:41 The LB-02 Barn Door
26:07 The FAN
28:41 The construction of the light
30:23 The biggest modifiers on the M600D? No problem!
32:50 How bright? (in F stops) Bare bulb, reflector and fresnel
34:14 Godox Light App
35:34 Outro
This video demonstrates every possible thing you want to know about this product along with tutorials, the entire manual and tips.. It's so full of information that you don't need to go watch anything else elsewhere.
🔔Be sure to SUBSCRIBE!
YOUR help by subscribing to this channel helping it grow is highly appreciated. Please like, comment and subscribe. We LOVE comments!!!

[@luisa9628]

Fantastic review. The outdoor tests was some great stuff, good to know it can keep up with the sun. Hope the movie goes great! The barndoor case was a good call too.

[@ArtVideoProductions]

Thank you very much! I’m happy that you enjoyed my content

[@abdulmalikqasim]

WAW very great reviews 👏👏👏👏👏👏👏

[@ArtVideoProductions]

Thanks bro! I also just reviewed the M600Bi! Check it out!

[@Bo_Hazem]

Sweet! Can't wait for the GVM 600w bi-color review next!

[@ArtVideoProductions]

Here it is. kzbin.info/www/bejne/a2KzaYOeq8abm5o

awesome review as always!! :)

[@ArtVideoProductions]

Hey man! Long time no see. Thanks for watching!

[@chazpozzi]

This 36 minute video actually feels like it was only 15. Maybe because it's not just a review if this light, but also combined as a workshop. It's like if I had this light in front of me. The whole thing was extremely engaging with the stuff I needed to see to decide on my purchase. There's nothing else like this on KZbin. At least not at this level of detail plus the filmmaking tips along the video. You covered absolutely everything!

[@ArtVideoProductions]

THIS MADE MY DAY 😀

[@akpevbe]

Great review dude. I just found out from another youtuber (and page 28 of the manual) that the controller actually allows for charging of one battery (side with the YELLOW battery romoval does support CHARGING). So thats really good news

[@ArtVideoProductions]

Hey, thanks for the info. I already know about that feature but I can’t tell if it actually charges the battery. I left it there for 1 hour on the yellow side but made no difference.

[@akpevbe]

@@ArtVideoProductions Mine is quit new and haven't even unboxed it yet but might have to go test out for my self

[@ArtVideoProductions]

@@akpevbe please let me know how it worked out for you. Thanks!

[@akpevbe]

@@ArtVideoProductions I tried it also and it didn't work. I sent Godox a message already and just waiting on a reply

[@TMIDD]

great video love using godox on my channel as well. keep creating!

[@ArtVideoProductions]

Thank you very much!

[@manchester8117]

Another great review. I just have a basic question... If you group this light with maybe some Tubes and a SZ150R, and you use the lighting app, will they fire at the same time?

[@ArtVideoProductions]

Thanks man. You have to assign them as a group. I don’t use Apps on set often. My crew is my “App”. But as far as I remember, you can. I’m in NY right now but I’ll be happy to make that test that for you when I have a chance.

[@GatesRick]

One of the best reviews I've seen. Thank you. I would probably hang this light from wall spreaders and menace arms. How long is the head cable?

[@ArtVideoProductions]

Thanks man. I don’t have access to the light at this time, but the head cable is decently long. Now… this light is heavy. If you plan to install this light on a wall spreader, I also assume there will be more lights loaded, at least on my set I do. I don’t know what kind you have but again, it has to be a good one. Here’s an example kzbin.info/www/bejne/b6jFcnh6qMmor7M

[@AlexLog314]

I am seriously considering buying this roller case for my photography stuff. It looks so much better in terms of construction than anything else Godox offers. Maybe the roller of the ad1200 pro.

[@ArtVideoProductions]

You can buy the case separately I believe at BH

[@AlexLog314]

@@ArtVideoProductions it is the Godox CB-65. There is a very similar case in size, model number CB-51. The 65 is narrower but deeper. But the long side on both is 64cm.

[@ArtVideoProductions]

@@AlexLog314 it’s the CB65. The CB51 is smaller. I’d go with the 65. I can’t believe that thing is only $89! That’s a STEAL. Also, check the CB-04!!! Bigger and cheaper!! Wheels!

[@ROBERTPOKONSKI]

Hi master of all case. I been having trouble finding a case for my FalconEyesRX-18TDX II. I brought it when it came with a round tube case. I hate it. The new ones come with a flat great case but not sold separately. thxs for the help

[@ArtVideoProductions]

Thanks man LOL 😂 I would have to have the item here as I would need to measure it and also the other accessories. Otherwise, it’s difficult. Finding cases is time consuming, def not easy lol.

[@SandroFelippin]

Congrats , great review ! I was looking for an alternative of light source to creat some 120fps 800 ISO videos using Laowa 24mm f/14 probe lens on table top food preparation scenario. I believe this is the best light source regarding power and cost. If you have any other alternative for table top images using f/14 and 120fps please I really will appreciate your suggestion. Thank you so much and greeting from Brazil

[@ArtVideoProductions]

This question is not an easy one to answer. Depending on what you’re shooting or the scope of it, you might need more than one light. But if you have just one light, in this case, the M600D, for food prep, place the light above with a very large diffusion frame mounted on C stands or steel squared bar. Using a probe lens, same deal. I’m very happy with my M600D. I think you’ll be happy with that light as well.

[@anlagrdr5229]

I am wondering if "lift only dont roll this case" warning sign written by you or by godox? If by godox, why they choose to add wheels to the case? I would love to see an outdoor softbox test as well. Other than that you covered everything. Great and very detailed review as always. Congrats^^ It's a nice touch to show people how to remove the bag content, definitely not silly :D Because when i get the new lights i usually feel very excited and remove the entire bag without paying attention. Then i ended up not being able to put everything back in the bag. Trying to figure out by trying different ways and sometimes i even specifically watch how youtubers remove the bag content :D So that was a nice touch :D

[@ArtVideoProductions]

No, I put that label there. The primary reason I don’t roll the case is solely because I don’t want to scratch the wheels 🤣🤣🤣🤣. And I mean, any of my cases or to get it soiled and ruining the bottom rear of the case by someone dragging it on a curb. That would piss me off 🤣. I’m super very picky with my stuff. The M600D’s case’s wheels are solid, nothing wrong with it.I just don’t roll them.

[@rocaivan]

Please share the link to a barndoor carry case you use. Thanks

[@ArtVideoProductions]

The link to the barn door case has been in the description since day 1. Thanks.

[@rsmolkin]

If I'm trying to light a speaker in a ballroom giving a speech, any idea if this fresnel lens would do the trick and how much power I'd need?

[@ArtVideoProductions]

A fresnel + the M600, you can even call Batman. Take it easy when using fresnels and lights like this concentrating that kind of light on someone’s face, especially if they are not actors, who are used to this stuff. How much power will you need? It can vary from just 3% brightness if it’s indoors and if the subject is 6 meters (7 yards away). I’m not there so I’m guessing. Well it depends on a multitude of things. Is it daylight, or… bright background, or… indoors… far… close… all I can say is that using the M600 with that fresnel for this particular thing you want to do, it’s plenty of brightness.

[@rsmolkin]

Thanks, it'll be indoors approaching sunset. But with ballroom lights. I actually ordered the sl200 iii and the 8" fresnel, hopefully it'll have enough power and won't make the shadows rediculois. May have been better to get 2 60w Aputure la 60x and cross light from closer, but the godox was actually cheaper than one 60w Aputure. I might just stick it in an octobox and get it closer, but wanna try the fresnel, should arrive Monday. Might have to post a test at long distance as I haven't been able to find one.

[@ArtVideoProductions]

@@rsmolkin whatever that is you’re tying to do, ALWAYS test it first with a friend BEFORE you go on a paid job. That’s a lesson I learned all the way back in 1991. Try the fresnel, Softbox, all options. And see which one suits best. The fresnel will work too and with very little power. But on the shadows it will depend where you place the light. With the fresnel, Try placing it as muck in the center as possible correlating to the camera. On the side you’ll get shadows

[@GainesvilleKen]

I wish you had demonstrated the effect of the barndoors. On mine I'm seeing serious issues with concentric shadows, plus, unlike the FLS8 on the M300D, I'm getting no clearly defined barndoor cuts.

[@ArtVideoProductions]

Hi Ken, looks like perhaps you were skipping parts of the video. Absolutely everything is there including barn door tests and how it performs. Plus this video is chapter indexed. 🤷‍♂️

[@GainesvilleKen]

@@ArtVideoProductions I'm sorry, I did miss that part. Thank you!

[@ArtVideoProductions]

@@GainesvilleKen LOL! No problem 😉

[@ericgrayphoto]

Have you had a chance to play with the Godox LA150/200Bi?

[@ArtVideoProductions]

The 200Bi, yes. kzbin.info/www/bejne/hJ-bd2t4fcqMrc0

[@tomaszmaj4766]

Did you test this Godox fresnel on Aputure 300d ii, I've heard that Nanlite fresnel doesn't fit with Aputure despite the bowens mount. Maybe the Godox and Aputure combination will give sharper light cause 300d ii have smaller COB

[@ArtVideoProductions]

Doesn’t fit. Here’s the link, advance to 42 minutes kzbin.info/www/bejne/rHeXmHiqbqqorJY

[@ArtVideoProductions]

And you don’t necessarily need the fresnel. You can get this Aputure barn doors. I also have a LUPO light, same issue, even it the Godox barndoor fits, it’s not sharp at all. Maybe this item will solve your problem. I just bought. And if it doesn’t solve for you, you can simply return it… amzn.to/3wQPQJ1

[@Itaketoomanypics]

Seems like Bh and adorama don’t even have this on their site anymore , good think We got one a month ago lol

[@ArtVideoProductions]

This is temporary. They will be in stock

[@UnchartedWorlds]

This can't be Knowled M600D light, it's color temperature is locked to 5600K, while you are getting color temperature variations in your light.

[@ArtVideoProductions]

Where exactly did you see that here?

[@UnchartedWorlds]

​@@ArtVideoProductions you are right, in my defense i slept 5 hours last night. What confused me is their app allows you to play with color temperature for the light that does not support it and you had it at different values at different time in the video, they should have locked if the light is not supporting it. Anyways sorry to jump on you like this, you are right 🥰👏🫡

[@ArtVideoProductions]

@@UnchartedWorlds it’s all good. And thank you for watching my content especially that you watched it that far. Always appreciated.

[@UnchartedWorlds]

@@ArtVideoProductions will subscribe 🤝😊

[@bbones3318]

light meter reading at 1 meter? come on man, who shoots 1 meter away from the light? 3 meter readings, 2m minimum is needed.

[@ArtVideoProductions]

The standard distance to measure lumens is 1 meter away. Did the same for light metering, and for reference only.

[@bbones3318]

ok, fair enough. would be more useful if you showed at 2-3 meters as well.