Godox XPro (XPro-C) Wireless Flash Controller - The Best Trigger for Godox AD600, AD200, V860II

[@douglasdean2579]

Not sure it was mentioned but for those who worry about accidentally changing settings you can hold the MODE button for 2 sec. and it will lock all settings. To unlock hold the MODE button again.

[@dgrano20]

Your videos covering the Godox lighting system are the reason why I've invested in them. And have to say it is easily one of the best investments in my photography I've ever made. Keep it up.

[@mrz1342]

David Grano-De-Oro .... exactly! for me too :)

[@ProjectOverseer]

David Grano-De-Oro Ditto 👍

[@chrisv1251]

Same here

[@TheUrbanmeister]

Yep.

[@davidaylsworth8964]

Watched your video twice, played with my new XPro-C for about 30 minutes and was happily exploring my 580ex II’s until the batteries ran dry. Thanks fir your video - the side by side demo made the learning curve more effective. And like everyone else, manual could certainly use improvement.

[@robhallphoto]

Glad to hear it helped you out!

[@bethbaugher7027]

Yes the manual is not very helpful!

[@davidaylsworth8964]

@@bethbaugher7027 I found that after spending a bit of time with hands on the unit that I learned the controls fairly quickly. Although after not touching it for a while I had to relearn it again, this is where the manual would have been helpful. Cheers!

[@russelldrake3386]

I have watched this video several times. I am a Nikon shooter and the information is universal. Good job! Whenever I need a brush up I come back to this video. Thanks!

[@robhallphoto]

so glad it's been helpful to you!

[@robhallphoto]

As many have stated in comments : The ID function is most likely an additional layer for the flash to have a specific line of communication to equipment, so that two users could coexist on a single channel. This will likely be added to their other products through firmware. Additionally - I got the TCM function backwards, it is far more useful. You can use the TCM function after any TTL shot. This means you can shoot multiple times, as soon as you are satisfied with the result, you can hit the TCM function, and it will then convert your TTL to manual. So you don't have to pre-emptively choose TCM before your first photo!

[@pietervandenberghe]

Hi, thanks for all the great info on everything Godox. I do have a problem with the TCM function, and several people have mentioned it, where it does not convert the light power accurately at all, but grossly underexposes compared to TTL. Any ideas as to why this happens and what I could be doing wrong? Many thanks!

[@7dstudio804]

Robert, thanks for the video, i got this trigger a day back, the LCD screen backlight is not switching on, might be a device problem, but still wanted to check here whether is there any other menu apart from the LCD screen which switches the backlight on.

[@ShlomiGreenPhotography]

Thanks for the video, Rob. Just a small correction regarding the SHOOT menu: Single person icon is for sending the power levels only when you actually set them, Multiple persons icon is for sending the power levels before each shot you take, and the APP mode is for making the trigger just a dumb trigger, since the power levels are set via the app.

[@kirkdarling4120]

I wonder if using the Set button comes into necessary play there.

[@karlogesnerphotography]

most cohesive review on this transmitter on KZbin. Hands Down.

[@genial55matt]

ID mode is common in canon, you must put the same ID number in the trigger and flashes in order to shoot, that way you wont trigger any one`s flashes, I use to use 005 in all my canon flashes cuz it was my lucky number

[@KamenMinkov]

5 Minutos De Fotografia Isn't this what channels are for?

[@alexcomaya3492]

@3:05 - it is necessary to press SET after changing power setting because it will not be saved. You will still initiate the previous power setting unless you press set for the new setting.

[@robhallphoto]

No but then if you hit the dial again it could still change. But, I never hit set.

[@alexcomaya3492]

Robert Hall Photography i mean for example you are using 1/8 power then you want to increase it to 1/4 power, dial it to get 1/4 reading highlighted on trigger then must press set, otherwise you think you’re using 1/4 power already but still 1/8 being fired by flash because you didn’t press set but in the trigger shows 1/4 still highlighted. Was not pressing set also before but i saw it from one youtuber that you need to press set then he is right after i tried it actual test. Check it by yourself or maybe i’m saying differently from topic or maybe i’m wrong in some way.

[@thelmakelly3628]

This is the most concise and well worded video I've seen on this product... thank you!

[@robhallphoto]

Glad it helped you!

[@Kelkschiz]

Love how you break down the info in the manual; they can be a real struggle to read properly. Awesome job, thanks!

[@jamesdanielelliott]

The ID function exists on all of their units I believe, XT-1 has it in func 11. Basically it's a Wireless ID, which if you set it will only trigger units using the same ID. You can consider it similar to a password in combination with the Channel. I doubt it's highly secure, I'm sure if you sniff the 2.4gHz channel you can figure out what someone is using. But it adds a little complexity and reduces chances you will accidentally trigger some other persons Godox units, and vice versa. I personally set a Wireless ID and Channel that are not the default, and should never run into issues theoretically, even though the chance was slim on defaults.

[@terrychristy38]

Thanks, Robert, I’m new to KZbin, so I’m not sure I am replying in the right place. Yes and yes. Just found that there is a firmware update to address the TCM function being under-exposed when converting to Manual. I still need to update. I’ll let you know the results. Thanks

[@ProjectOverseer]

I love using this unit. Controlling multiple units and individual power settings is an absolute breeze. Excellent "how to" vid 👍

[@Digger121954]

Thank you! The English translation in the manual supplied with this is practically gibberish especially to this newbie, even now a year and a half after you made this video,. Seeing how it works is a great help!

[@Smoothblue90]

Great video. I've watched it many times. It's nice how you were active in the questions in the comments.

[@PhotoKenji]

I think the "ID" part is used to distinguish yourself from other photographers using the same trigger.

[@adriank9234]

exactly, if you have another photographer using same set up as yours but not with you, just set an ID (and for your 2nd shooter) and when you fire, the other dude's flash won't and the other guys apart from yourself and your 2nd/3rd shooters (if you have them) your flashes won't fire unless you actually trigger them. Chances though of that happening, especially at a wedding so remote as I don't bother.

[@ivonned32]

Yes. I think someone else mentioned that he matches his ID with the light he wants to control

[@mrblackbond]

Mine gets delivered thursday. Cannot wait to test it out this weekend.

[@Princeton_James]

Had the x1t for 1 day. Saw your vid and immediately ordered the Xpro. Thank you.

[@chadlinebarger4061]

Yes this is a much better trigger. Had mine for about a week now and love it. Has a more professional look and feel. Maybe it's me but it just seems to work so much better communicating with rest of the Godox equipment I have. Great job Godox. Thanks Robert for all your reviews.

[@notmyname8527]

I think they listened to your suggestion. The one I have changes to Zoom with a single click and Channel with long press.

[@robhallphoto]

They did!

[@GregWallis]

My XT32 is great, but this takes things to an entirely new level. Great information, thanks Robert.

[@alassen1]

Thank you for all the effort you put into all the videos that you make. Very appreciative. I A small town photo journalist mainly photographing high school sports and now transitioning into location lighting. I recently bought 3 AD200s And the flash trigger that you had in your video. Found it very informative. Thank you again.

[@monsterwerksvideo]

Bam, just like that at 4:12 you answered my question! Thank you for this tutorial, I'm learning a lot on how to use my trigger.

[@SueFerreira75]

Thank you - the most comprehensive video on the X Pro I have found.

[@danielfugaciuphotography7601]

AMEN to the lock man. They drive me nuts!

[@makatron]

Hate hate hate that serious manufacturers still using anything but the lock lever.

[@tedp9945]

This

[@amdenis]

Love the locks, but if they are going to use pot metal or plastic for the lever, give me the ring; as I’ve had a couple break. Give me a simple metal lock.

[@michaelerdkamp276]

RIP Profoto .... Godox 200AD rocks. Sold my Profoto B1's and never looked back.

[@mohis4299]

Thank you Rob for a very comprehensive review of this accessories of Godox. Crystal clear explanation is very much appreciated. Keep the good work.

[@brianbat4980]

Shut up and take my money!!! Thank you so much @Robert. You singlehandedly switched me to the Godox/Flashpoint world. I am so glad I won your extremely generous giveaway because it has made my world much easier. I just purchased the XPLOR 600 so Godox/Flashpoint have you to thank for one extra sale. And I must have this product as well. I have the exact same problems with the X1 as you do so I am super happy about this version. Thanks again and keep it up brother!

[@minkymott]

I have the XPro (N) and I love it, love it love it. Great video by the way.

[@normski4ash]

Thnx for all your Videos on Godox, if you aren't being treated by them you should be !!! I have been using Neewer flashes and triggers with my Sony A7's & so far they have been brilliant, no complaints. A new flash came out, the NW630, HSS, TTL, 2.4G etc, I bought one. It doesn't work with the N1Ts (copy of the X1Ts) ! So I asked Neewer the question, Oh no this is a new flash, needs new trigger ! Back on ebay for you... Now bought TT685(S) for my A7 series and TT685(C) for my 5Diii set up. I have had to wait until today (my birthday) for the X pro(s) trigger... It is brilliant ! not only does it fire my Sony TT685, it fires my Canon TT685, so I have two flashes for my Sony. Hang on, Neewer is just rebranded Godox ( * Bright idea ) OMG, it fires my Neewer NW880s & my el cheepo Neewer NW865s manual flash. Next stop ebay, get an xpro for the Canon range of cameras - Loving this even tho not been out of box for more than 5 minutes

[@wa7sca]

Thank you! I just started using my xProN that had been gathering dust and needed some instruction.

[@derekmack]

Multi mode is to do with strobe effect, it's in the X1 as well. You tell the flash hous many flashes and at what speed to strobe, used for creative effect in longer exposures to catch movement . So maybe you want 20 pops over a 2 second exposure, you tell it 10 at the rate of 5 per second etc. The ID is so that if more than one photographer is on a specific radio channel, they can have different ID so as not to trigger each other's units

[@derekmack]

Oops, 10 flashes over two seconds at 5 per second, not 20.

[@robhallphoto]

I know what stroboscopic mode is. Thats built in outside of the custom functions. The ID stood out because it's not on anything else, so it looks like this will be added via firmware for other products / future products. The multi I referenced in custom functions is indeed designed to help you control how it behaves when multiple photographers/cameras are triggering the same group of lights.

[@derekmack]

Pretty much all the Canon versions use that channel and ID setup.

[@robhallphoto]

+derekmackphotography let me rephrase, it's not on anything else Godox. So right now it serves 0 purpose.

[@derekmack]

The only thing I can think of is they may be retrospectively going to add firmware updates to other stuff, makes no sense to be on the transmitter alone. It's so long since I got my 699's and the X1 I don't recall if I had to set a radio channel, I must look am curious now 😂😂

[@makatron]

The AF assist is a main feature to have, and the only reason I still put a speedlight on top of my camera for wedding work. I can't rely on the built-in focus lamp in Nikon bodies.

[@KamenMinkov]

Isaac Alonzo Have you tried a D5 or a D500?

[@KamenMinkov]

Isaac Alonzo Have you tried a D5 or a D500?

[@makatron]

D500 yes. why

[@Utroll]

but that controller doesn't have any AF assist does it ? It's about switching ON/OFF the one from deported flash(es) right ?

[@kimberlynorton]

Thank you so much for this video. Do you have one that show how to make this trigger work with the flash. I know there is a manual for the flash but their manual is horrible.

[@Jimmy_Cavallo]

Great overview, Robert. Really. Lots of info about the menu system and basic functions. I wish that I could find a video about actually using the R2pro with the R2 receiver firing a speedlight in manual mode like what settings to have the speedlight in along with the R2pro.

[@artofwomenphotography]

I have pre order one. Can't wait to get it.

[@jasonhessrocktography9951]

The fact that AF assist doesn't apply to continuous focus makes NO sense to me. I am sure it's not isolated to this particular unit. However, why can't the AF assist just turn on when your focus system turns on. As in when the continuous focus is used - the AF assist SHOULD turn on as long as your focus button is depressed and in turn helping the camera focus in low light. That is the point of having it - it should apply to any focus mode you use. It happens BEFORE the camera actually locks on focus so it shouldn't matter. ANYWAY - fantastic video as always Robert - your reviews and product run-throughs are the best out there. Always full of detail and pros and cons from the real world. That is what we need !! Thanks for all of your work.

[@robhallphoto]

Af-c is designed to constantly track focus as long as the button is being held, while Capture is at any point. How could it accurately know when to anticipate your image capture and turn off the AF-assist beam. It might work if you have the focus hold on it’s longest setting but even then you are talking about millisecond gaps to shoot during. There’s simply no way for it to avoid being problematic. For me, as a back button shooter when I’m using AF-C I hold it down the entire time even as I take shots, so the grid would never have the opportunity to turn off. I just don’t think there’s a way to make it work for all shooters

[@snafu673]

I like this video very well presented in all the functions of the XPro, nicely done! I was wondering about the ID section myself.

[@robhallphoto]

Thank you!

[@sodnightcrawler]

Under the menu option the option for shoot the one means one subject photography and the three is for multiple people

[@robhallphoto]

No. It has to do with number of photographers using the lighting system. What would change with the trigger based on how many subjects are in the image?

[@MacPassion]

looks cool! would have been nice if you have angled the transmitter so that the screen glare was not so much. hard to make out what it says. thanks for the video though!

[@Dave_Koch]

Mine comes on Monday. After watching video, I am excited. Great video!

[@krishmandal9769]

Awesome walk-through Rob. Thanks! I came late to the studio strobe game, but luckily started with Godox and you are a great sounding board. Keep it up!

[@fotowalo]

as soon as it's out for N, I'll order it....thx 4 showing this video :-)

[@robhallphoto]

+walo Thoenen I'm anxiously awaiting its release myself!

[@futbolsports8320]

Hi, Can you help me? How can I activate the laser for auto focus of the Godox XPro-S? Before I had the Godox XT1-S and the laser worked perfectly for auto focus but with the Godox XPro-S I could not activate it. Thanks.

[@wmbrennan]

Great video. I have the x pro c and initially worked great. After about 2-3 months the trigger worked hit and miss using the shutter on the camera. I was pulling my hair out to fix it. I found that licking the base of the trigger before putti it on the camera and it works! I suspect something not making a good connection. Could be the pin that drops down when you turn down the locking wheel. Have you heard of anything like this or suggest a fix?

[@kimberlynorton]

On the new XPro for Fuji it seems like the Zoom is a Tap and the Channel is a Long Press (opposite of what yours is doing). I agree, I like it that way much better.

[@robhallphoto]

Yeah they updated it via firmware and applied it to the newer models per public demand.

[@kimberlynorton]

I set my trigger up with my flash! First time I have ever used a trigger before.

[@ivonned32]

I just order one of this to use my two V1 godox off camera. Eventually I am adding a 200pro as well. What do you think? 😀

[@local9]

Thank you for your video, I know what I'm investing in end of this month.

[@forsak3none]

man you are the GODOX GOD!!!!

[@marlonmenendezgomez5588]

Just find your channel and watched this video, I didn’t read all the comments but might be helpful if I add something about the ID on the menu, it’s a subchannel to make sure nobody around you using godox shots your flashes.

[@tootruedesign6923]

Just bought one and returning the X1T-N - Thanks for clear concise info! :-)

[@shang-hsienyang1284]

I will buy this product just because of the TCM feature. Nice!

[@wanneske1969]

Great video as usual, and great trigger too !

[@miroslavnemec348]

Today I have updated both V860ll for Nikon and both are able to work with IDs. Not the same for AD200. Maybe later. But found problem with alt masking. When trying to operate with X1TN or X pro N, both worked ok only for the first time till I switched to mk2. From that moment AD200 operates only with mk2, it means it flashes only at the second press even in mk1. But when I press the flash button on AD200 it works ok. But I have only one AD200 at this moment.

[@tommyestridge9301]

Excellent video, you do a superior job of explaining how it works.

[@robhallphoto]

Thank you, glad to hear you found it useful!

[@lhightower2]

Thanks for making these videos, as the manuals are quite vague.

[@Minotaurus007]

If you want HSS, check compatibility first: XPro-N + XTR16 (both 2.4 GHz) do NOT enable HSS with Godox flashes AD360 (Mk1) and AR400 on Nikon D3s, D7100, D200 / Fuji S5 Pro

[@editsurpickaja1354]

SOS , please help , I have X pro(s) Godox ad360 XTR16 (2.4 GHz) I can shot but can't change power on flash from Xpro Should I change some settings on Xpro or any solution Please Thanks

[@ivanseru8924]

I have the same problem, l have sk400 with xtr16 and i can't change the 1/128 to 1.0 :(

[@geru2000]

Thanks for the review; I'm presently not a GODOX use, I have for the past 2 years been shooting with the YN 560 TX and the 560+660 manual flashes. While I like the system and unlike others have found it to be reliable I don't find their TTL offerings as reliable especially with the newer Canon cameras. When Godox introduced the AD200 is when I first took notice and now with the new XPRO series triggers it seems like a dream system. I'm still going to give it a month or two to work out the problems if any but GODOX is for sure on my list. I do enjoy shooting manual flash have the TCM function would be ideal for me , I'm one of those photographers that likes to work the scene once the lighting is dialed in and TTL doesn't afford me that opportunity. In addition HSS would be the one function I'd truly use. Again thanks for your review it's greatly appreciated.

[@LuisAlvarez-fj5ny]

Jack exactly my case. I am buying an AD200, so I can’t use my very good yongnuos triggers. Did you finally migrate to godox? Are we loosing something by moving to godox triggers?

[@bobcoulter5001]

Robert, your videos are awesome. Thank you! One question I have. I'm using the Godox V860II F (Fuji) flash with the Godox XPro F . When I set the XPro to Min 1/256 my flash doesn't go below 1/128. Whut up?

[@darylnd]

The display cover on mine (XPro-S) was soft as chalk, even my camera bag inserts scratched it. My Sony a9 intermittently would give me a warning that I was using an incompatible device.

[@josh885]

Actually if you want to talk about copying this is almost a straight copy of the Phottix Odin II but with a better looking screen. Which is a good thing because the Odin II is by far the best radio flash trigger controller as far as usability goes, even better than the pro photo air system IMO.

[@robhallphoto]

+josh885 definitely, I loved the Phottix Odin II as well as the Cactus V6. Certainly don’t mind Godox drawing inspiration there.

[@ianrutter4208]

Great video. I have the Godox V860iC flash and a DS300 strobe. I'm going to purchase the Godox V860iiC but can I still use the old FT-16 trigger on the 860ii? Or, do I have to purchase this new wireless trigger? Is it worth the upgrade? Again, great video. I love Godox.

[@petermarco1]

thanks for the info...can you fire a Nikon flash sb800 or 900 with the Godox trigger and the x1 receiver

[@InVacuo]

Gotta agree with all your improvement suggestions (except for the hot shoe quick release, they're generally too wobbly for my liking). Great video, thanks for the info, can't wait till this is out for Fuji!

[@77dris]

My Xpro-c in Manual mode, even at 1/128 is WAY overexposed using my TT685 flashes (canon 5D mkiv). In ETTL mode, the flash/trigger work fine.

[@robhallphoto]

check your firmware.

[@GTacticalJody]

Can you show us how to use TTL with off camera flash please‼️

[@Jimmy_Cavallo]

6:34 Hey Rob. Does the app setting mean that I can trigger my lights with my iPhone 11 Pro using the Godox Photo app and my R2 Pro.?? I really don’t want to have to buy that tiny dim Profoto C1 Plus for 5 hundred bucks.

[@nuohk]

SOLD!!!

[@johnnyroncinske8403]

Is there any way to completely synchronize the X-pro with the X1 receiver and the Godox V860i to be controlled by the MIOPS Water Splash Kit>>??

[@miroperez613]

If you are in ttl mode and you adjust flash compensation on the camera what does that do if anything to the fec the remote uses to send to the flash? If you change the fec on the remote and the camera what does it use as your setting?

[@CrumpPump]

Do you know if the one for cannon would work on the EOS rebel t6?

[@raveemahadevan]

Hello! Been observing that he Godox AD 600B (Firmware version 2.4) with Fuji X1T F communicates perfectly on Manual mode/HSS but strangely does not communicate in TTL mode. Meaning the manual tweaking (+- 0.3/0.7 s) on the transmitter does not change the reading on the flash. Is this normal? The transmitter is updated to the latest version 3. and the flash is on ver. 2.4. If I read right, the FECs for TTL are independent values and can be controlled either from the camera/trigger or the flash itself. A change to either two simultaneously would add up as a sum of the adjustments and not stand as individual tweaks. For example, if I change +1 on the trigger and it accentuates to another +1 on the flash through wireless the total would add up to 2 stops. I could be wrong. Kindly explain .Also, does the TCM take care of this issue to an extent with the new X PRO series trigger? Thanks

[@JeremyDArcy]

I am having a similar problem with my Cannon 5D Mark III. It was working before, but not now, and I can't figure out what setting I changed. I can control the exposure for Manual, but it stopped working for TTL for some reason. I've checked the channel and group. But when I change the setting on the ProX trigger, it doesn't change on the flash. I can change the mode from the trigger, but not the exposure. It will test fire from the trigger as well, it just won't change the exposure setting when it's set to TTL. Anyone know how to get it to work again?

[@ssdigitalssuresh9697]

Sir in menu settings please make a detailed of use of shoot mode... I can't understand that option... Can you please make a video sir

[@6gwilliams]

Feb 3, 2018 and still waiting for my pro-ordered Sony Version. A long wait.

[@robhallphoto]

You and me both!

[@6gwilliams]

Yes

[@dlmartin81]

One of my biggest gripes with Godox on-camera flashes and triggers is the strew type fastener. Coming from the Canon line, I love the locking mechanism. Do you find the flashes and triggers coming loose over time? Is it a solid, stable connection, given the fastener is tightened adequately?

[@robhallphoto]

I do find that on my V860 and X1. I'm waiting to judge the XPro when I get a Nikon specific model.

[@laurencegrant2882]

Thank you. Nikon transmitter needed for Nikons.. Have Fuji one. Do you think the Fuji 685F will work from he Nikon Transmitter. I know AD200 will. Is it that Godox label 'F' because it works TTL on Fuji cameras.

[@GRJCLyon]

I shoot Nikon. X1-T works awesome. I bought this one for the newer features which make it nice to work with. However, they are not compatible with the first version of the ad360 and no update in sight. Weird how a newer version wouldn't support the light.

[@adityadarmawan778]

Great improvement from X1T series! Waiting for the Fuji series.

[@Lina-ex8pu]

Are there any videos that can help with how to expose correctly or lighting tips using trigger settings?

[@robhallphoto]

kzbin.info/www/bejne/gHOWf5umj5qql5Y&ab_channel=RobertHallPhotography

[@lunarcelestialfilms7036]

Hi Robert, can you safely use a different brand controller on other cameras? Example : trigger for Olympus can be used on Fuji cameras? Thanks for all your help.

[@robhallphoto]

Safely, yes. Fully-featured, no. Power control is radio, and firing is done through the center pin so both of those things work. But things like TTL, HSS, Sleep/wake function, AF assist beam are all communicated through the camera-specific pins. So none of that will function if the trigger doesn’t match the camera brand.

[@armandocarrera6769]

Thank you Robert for this video it was helpful trying how to use hypersinc with my Nikon D750 and the xpro control was for me a little confusing but thanks to your video I'd solve it!

[@TerekkiTerekki]

Mine died on first shoot, just tapped the screen against the wall and screen was a writeoff - be careful with these. Got the XT2 now, hope this last longer than 1 week.

[@PhotoKenji]

Looks like the Profoto trigger, nice!!

[@7352tommy]

Great video. I’ve just put one on pre order in the UK.

[@Jimmy_Cavallo]

Hey Rob, all of your work rocks. Is there a more informative place for me to figure out the TTL to manual conversion function.?? Thanks so much.

[@sethnitrogaming68]

Great tutorial! How do you fire both lights at the same time with different power settings using this trigger? Maybe I missed that part in the video.

[@robhallphoto]

kzbin.info/www/bejne/hnTRY3ehZq50hs0

[@sjovmedphotoboothen2624]

That is so cool - I'm excited!

[@GabyAwad]

Great Video... Is it compatible with the Fujifilm and specifically the Fujifilm EX-F500 Flash? Do I need a receiver with it to be compatible?

[@tayloriginals999]

I'm trying to figure out how to use the xPro as a wireless shutter trigger with my X1R and also use my AD200 Pro as off camera flash. I can't seem to figure out how to set that up. If it's even possible or if I need to get another trigger.

[@bartabz2199]

@RobertHallPhotography, why didn't you actually show the assist beam? What is the cable that goes into the port on the side?

[@robhallphoto]

Because a Nikon camera can't trigger the AF assist beam on a Canon shoe since the pins don't align or communicate the same way. Ports are for sync to camera or flash (3.5mm) and firmware (USB)

[@ChoicesHabitsAttitudeLuck]

I am using an AD300 Strobe. So Which one should I choose 200, 360 or 600 on TCM?

[@Stharrison85]

Do you know when this will release for Sony?

[@robhallphoto]

+Stharrison85 no announcement yet.

[@heartrotica]

Me too .... I am interested to know, when the new Godox XPro (XPro-C) is realeased for SonyCameras ...

[@OrlandoMac]

Michael-Gabriel DeShay I just ordered mine off of Amazon although shipping date for the Sony trigger is end of February.

[@JerryMac1125]

Great job Robert 👍🏼

[@wampiva]

Hello, does it works with no godox flashes? Thank you.

[@358studios]

Hey great video. Coming from PCB so this is a welcomed upgrade in controllers. Quick couple of questions. Light settings. Is there anyway to store light settings like in the Cybercommander? I want to push a button and have custom settings activate. Also, I ran into HSS trouble where my camera didn't want to go higher than 1/200. Eventually, flicking a few more things I got it to work, but a video describing how to use the HSS and rear curtain would be great. Lastly, what is zoom as it relates to AD600 Pro? It doesn't right? Thanks again.

[@chewbacka1982]

yeah I get banding on HSS with 1/250 afp on! GEAR is: NIKON d750 XPRO V860II combo...

[@358studios]

@@chewbacka1982 Hey there, having purchased this setup, I'm going to guess that you don't have HSS turned on. Look up in the top right-hand corner. Does HSS show? If not, press the sync button until it does. BTW, I'm going from memory so sorry if the details are a bit off.

[@therookiefisherman5234]

Hey happy holidays. I have been trying to see if somehow the back curtain is on. I try shooting in i-TTL and get an underexpose photo I can here the zoom on the flash working as I zoom in and out with the camera and even at 7 feet away from a wall it's giving me an underexposed picture. When I press the sync button it does show the sync Icon however the back curtain icon never shows up. I have tried resetting the unit and I believe it's up to date right now is ver 1.4 unless there is a new update.

[@laurencegrant2882]

Hi Robert. Good videos ! Could you help clarify. I have Nikon cameras and flashguns, a couple of SB800 and couple of SB910 which I used professionally. Also SU800 commander. (PW etc) I recently bought a Fuji XT-2 and watched your video about the Godox so I bought a 685F and X1. Amazing features and price. I am considering a AD200 (bare bulb would help with light spread?) Do I assume the X1 will trigger AD200 from Fuji but do I need to buy a Nikon trigger for my Nikon camera/s. It doesn't seem easy to understand compatibility issue. Is there a general ruling? i.e. every camera need to have a dedicated transmitter. Every Godox product will would from any of there triggers? Will my 685F only work from Fuji buy yet AD200 will would from anything? If I bough a Nikon Xpro tigger would 685F work ??? All a bit confusing.

[@robhallphoto]

If you want full functionality, your master (the trigger or speedlight on camera, transmitting to other flashes) has to match the camera. All flashes off camera will convert TTL/HSS signals no matter the brand, provided the firmware is up to date.

[@randysmith6493]

I don’t have an app option on my R2Pro C. I also have not solve how to make TCM do anything. I did find out that if I move ID out of off position and onto a number no flashes get talked to, freaked me out as I have a wedding to shoot. Still trying to solve do I want to trust til as there is variance some times.