Gold Mining Hammer Mill & Sluice Box Combo! Gas Powered & Mobile Gold Prospecting Machine

[@barryfields2964]

You guys are mining the miners. That’s where the real money at!

[@phillipjacobson4457]

He makes money off your views comments and like button smashes as well from you tube.

[@jeffbybee5207]

Glad Jason makes money! He earns it helping people. And that a good thing.

[@jimmierturner3597]

Thanks!

[@adventureswithgoat719]

I absolutely need this in my life. This is exactly what I need for my future plans. I love your content, it is very inspirational and informative. Jason, I have learned a lot from you in the last few weeks. Thank You!!

[@Askjeffwilliams]

we will take one.....how much Jason

[@mbmmllc]

Hi Jeff. If your serious give us a call or email and maybe we can work something out. 360-595-4445 or [e-mail]

[@Askjeffwilliams]

@@mbmmllc sent ya a email .....

[@sophiamiller7457]

@@Askjeffwilliams hi, do you get the suitable hammer mill?

[@johnnydavis5807]

I'm a big fan of both of you guys it's cool to see you guys working together

[@victor_837]

Did you get the machine, how much is it

[@russellsmith3825]

This could be a good purchase for a prospector's club where the expenses and use would be spread out over several users.

[@shaneyork300]

Get a ATV and a small trailer hook up to it and you could get back into some good gold rich creek beds with that compact set up! You could produce 50 to 100+ times more than if you hiked in with a small sluice and bucket!! Have a GREAT Day!!!

[@croatiansensation6062]

What a great looking piece of equipment. Well done sir!

[@Adrian-nv8qj]

I absolutely love this product! If you ever do a GAW shoot this my way!

[@alldayidreamaboutsteak551]

Awesome showing of gold. Well done Jason and mbmm

[@TechGorilla1987]

I'm looking @4:13 and I don't see a zirc fitting on that bearing. I can say from experience that when a manufacturer says that they use "sealed" bearings, buy two sets because someone is going to change one within a week of 12 hour shifts on just about any conveyor head pully. My favorite thing that they told us was that adding grease to a "sealed" bearing would kill it. I may be missing the zirc in this shot though. EDIT - I think the zirc is on the far side of the beraing away from the camera. I should have known you had this covered.

[@rayarthur586]

Another great video much info eventually I will be in contact with you Jason. Per the other guy that said you were mining the miner's as long as I can get mine I have no problem with mbmm getting there's. And I have learned so much from Jason. Thank you.

[@MrDalerex]

Thats an awesome system for The little guys. Ill bet run the tailings again and you'll get a little more gold.

[@washingtonbeachmining7736]

Love it, someday that machine might work for me. Keep up the awesome work.

[@fatwombat2611]

Would one of these do well with a jig instead of a sluice ?

[@Mobmotors]

Exactly what I am looking for!

[@justinmiller9966]

Great show, looks like a damn good setup 💥👍

[@hardrockuniversity7283]

Nice video Jason. Couple of questions if I may. How much does the system weigh? Have you assayed the tails? And what is the approximate cost of both the system and replacement wear parts for the mill? Looks like a nice idea. I suspect it will sell well.

[@bandanabanana3162]

I want to know how you got the gas engine so quiet?

[@moosescrapper5928]

Could a machine like this be used in small application gold recovery from ewaste?

[@Killswitch22022]

I love this setup! So quick and easy once you get it to the mine. What's the total weight for something like that?

[@seanthorton3054]

its weight in gold... May I ask a question?

[@Killswitch22022]

@@seanthorton3054 you asking me or MBMMLLC? If it is me of course.

[@nhragold1922]

Yeah I definitely need one of those.

[@skidpignz2584]

cool machine I just saw one problem @6.00 minutes looks like you were losing gold from the join between the shoot and the sluice other than that it looks like a great portable machine

[@geraldfawcett9479]

Nice wonder if you found gold in the end container after crashing the material how much does this cost Plus shipping I am in Alaska

[@freddepauw]

What I would add is riffles in the sluice box

[@dmorgan5010]

Jason I have two4"lg 2" pin valves. I have been thinking powder mill due to size and it's current Fab and I have new heavy rod 18" 1.5+1.75 thick and I have 4 of them and 1round ball 3" fells 8 10 lb and of course ball mill on assembly line 6" intake in to 1" minus secondary the one you have on this video.

[@k_froggy]

Should add a second pully slot for a small pump. self contained is good. One engine, one gas tank.

[@paulmalamba164]

This machine is really convenient for small scale gold mining. How can I get it?

[@grelgen]

do you have a recommendation for the buyer on how to seal that leak at the top of the sluice?

[@jorgep.2033]

What an amazing machine

[@BillMulholland1]

I watch other prospectors. They could use a machine like that. Awesome! 🍻👍

[@WildMontanaHuntingAndFishing]

Needs a rubber gasket for the joint of sluice and machine. But I'll be in touch with you as am extremely interested in one.

[@mbmmllc]

Hi John, thanks. We have made improvements to the sluice box since this video. Give us a call or email any time for more info. 360-595-4445 or [e-mail]

[@kjbaran]

Yeah that’s awesome.

[@davidrussell8795]

How much for your jaw crushers and pulverized machines?

[@davidrussell8795]

Ok got your email address,thanks.David Russell

[@davidboettcher8167]

What is the average cost of this hammer mill with both screens mentioned.

[@dynomania]

That Mill is definitely built to last - American quality

[@piecartbox]

Omg... was thinking "that's the Pop-N-Son sluice" from the start!

[@mikejones-py3cd]

What are the chances you can get the hammers made out of maganese I work in the aggregate industry and all our jaw cone and impacters run maganese were metal probably make those little hammers last way longer

[@goldhunterexploration-shei5873]

A very good system for exploration

[@bobwerner6512]

would be interesting to run the tailings on the shaker table......thanks again

[@benjarvie1072]

do you have a video where you show the hammers ? also the motor is that a honda690 ? looks like a highpressure motor i have for high pressure cleaning... good motors... just to be clear so this takes material that has been through a primary crusher already ?

[@Hitachi-xb8ss]

Good work tool. How much does the tool cost without the engine???

[@coreymerrill3257]

Very cool setup! This would be the one to crush glass with too as it has that fluid injection system.

[@SweetyDonaldTrump.1]

How much for this machinery?

[@JerrycanWanderers]

Do still have the old foundry to make your hammers .just curious.

[@yasinosmanfadal2705]

Hi Jason, i really like watching your videos they are helpfull interms of choosing the right gold mining equipments and smelting gold ore to a gold button can you come toRepublic of Somaliland to demonstrate using some of these equipment and do some new video's. We really will welcome you.

[@infinus5]

little leaky under the sluice but not a bad unit! I would use one if i found a high value vein on my claims.

[@freddepauw]

perfect system!!! Have to congratulate you on this!!!!

[@blackopsrocks]

What clutch make/model are you using on that engine?

[@MrDarrenkid]

Thay would be great mounted to a trailer.

[@digger105337]

Would need to have collapseable legs to get center of gravity low enough to be towed stabily.

[@cacogenicist]

I would like to throw it in the back of a Tesla Cybertruck. :-)

[@billy-go9kx]

@@digger105337 run the axle under the width so it will look like a 5ft trailer that is only 3ft long. It would be cute too.

[@greglysne3260]

@@cacogenicist lmfao

[@russellsmith3825]

@@billy-go9kx extendable tongue and a tor-flex axle to cushion the bounce.

[@yusiftanko3200]

How much is it

[@angelogatia3583]

I love love this job I willing learn

[@augustineforomani9959]

Hello...what type of that gasoline honda engine

[@leehilton9932]

Nice set up! Would love to see how yall set up the jaw crusher above this. I've been lookin at yalls setups for a bit now.

[@RealLifeFinance]

Me a couple years. Getting my truck this fall and getting this set up for sure!!! They are very nice and helpful people

[@KD0CAC]

I'l take 3 of them , or wish I could ;) Thanks Where I'm at now , I would like to see try for electronics recycling , but with all the stuff going , the volume has dropped off .

[@frankromero5581]

You can magnictize that metel catch to lower the catch of gold

[@drewconrad7093]

Could it go to a shaker table instead of the sluice to separate the gold?

[@brentsmith981]

While possibly not as profitable for you, could the hammers be affixed with replaceable bolt on impact surfaces, foregoing replacement of the entire hammer kits?

[@GreatOutDoorWorldofMines]

large scale miner here and owner of one of your tables, i think a higher energy sluice would be better even for very fine hardrock gold. there is a good size for vortex too big and it collapse and needs too much energy to maintain its stability. too small it becomes overwhelmed too easily when loaded with slurry. many miners are putting huge volumes over 6lb expanded metal and having good results with very fine gold often in tailings. i would just try it, get a piece of 4 or 6lb expanded metal and add a little more water. remember this isnt to catch more gold(but maybe) on small runs, its to be able to improve the recovery vs ore sample ratio on larger scales. Nothing beats a sluice for gold recovery, simplicity, and cost on large scale

[@dmorgan5010]

Is the price for the small scale miner

[@juanjosemartinezcheca676]

hola. que precio tiene ese equipo ?

[@johnjacob7997]

I suggest a rubber or silicone trim on that discharge chute, an automotive door edge gaurd would be sufficient to stop that water leakage...flour gold is being washed away there.

[@trevorvlahakis1545]

How i wish you showed the clutch mechanism and that leak under the chute must be small

[@Appliedscienceguy]

Very Nice....I will be sure to give you a call!

[@jansteve-007]

What price on that fancy machine. It looks really ok

[@r.z4702]

Saya selalu mengikuti vidio ini walau tidak mengerti bahasa inghris😭tapi dapat dimengerti penjelasan nya👍

[@leovd4437]

😅 muke gile'..😂

[@383antony]

yang penting comment yes..! & good !..😂

[@JonB-d3x]

Hi Jason great video just wondering how much this unit cost ???

[@georgyandreev9992]

Good idea , nice work , BUT the vibration on the sluice and small licking ( were conection) , will wash out small gold for sure ! Connect the sluice separetly !?

[@eriknielsen1849]

It will rather make it sink to the bottom of the mat 😏

[@chrisparker9886]

I would run it into my Gold Hog! 😁

[@billy-go9kx]

Who is going to build the road for the pickup?

[@juliamoore836]

How much and where can I get one

[@mutavapedzi]

How do we buy the hammer mill

[@Michael-rg7mx]

Run your own hard rock mine on weekens and vacations.set up camp at a nearby water source where you can make noise.

[@jeffkingston312]

Jason Whear can I get some more information about this mill this is what I am looking for

[@Nova-cy2zv]

Where can I get that exact miners moss??

[@elvismchingami9634]

How can I get that one, how much?

[@njrasmussen5515]

It seems like your website parts of it are down or maybe completed have a price list for your equipment some place?

[@FKNSENDIT]

Won't riffles with razorback instead of miners moss catch the fine stuff?

[@waynep343]

I would weld a dozen short bolts on the inside of a angle leg to put a dozen spare washers and wingnuts for the sluice mat.

[@johnh8615]

I hit that thumbs up for safety. Nice dust mask.👍

[@nick2focused]

My assumption would be , depending on the size of material, whether it be up to 1/2" up to 4 " rock/gravel mix, the hammers would need more time to crush ,and processed through the grates into workable concentrates to feed the sluice.

[@nick2focused]

Sorry John ,that was obviously meant for the comment above yours.

[@poptart8741]

Tried going to your website ... can't view anything.. says the site can't be reached

[@Business_101]

Nice machine - how many yards per hour can it process?

[@yoopermann7942]

i dont need one wish i had the funds to get one though, cool, how would this work on copper? and scrap electronics?

[@ericlopezjr3]

How much is that system

[@goldiswhereyoufindit]

Man I wish I had one of those, but probably a little too expensive for a hobbyist.

[@Michael-rg7mx]

My neighbor spent $10,000 on his lawn mower. Define expensive hobby.

[@txwarloc]

Looks like I need to start saving ,

[@richardservatius5405]

looks like you didn't check the output of the sluice to see if you were missing gold. but you did put it into a tub that you could check...that's good.

[@MrDoooo0]

Loved this methode and machine. I hope i have it. Because i have good location for this.

[@YusufAssefa-d8s]

How much it costs

[@robinsonmirandaospina1804]

Hi friends ....in this video you can see a motor .. which motor is it ?? how many HP? do you also see a 12v battery? what is the price of that mill?

[@1topskyrocket]

That is a nice unit, you stated something about 30 to 100 tons before the hammers have to be switched to the other side or completely replaced?

[@davidrussell8795]

How much is your crusher sluice setup machine?

[@mbmmllc]

Hi, please send us an email at [e-mail] for more info

[@yankeedoodledandeefirecrac7518]

Im interested in knowing how Rich the Gold has to be in the vein to (break even Cost) oz per ton? running the machine ? approx.?

[@Slavicplayer251]

how much does a litre of gas cost theres your cost

[@eriknielsen1849]

@@Slavicplayer251 way more than that you forget the hammers and other wear parts plus the payback time on the machine.

[@kimyacsimyac42]

The machine how much ? Complete..

[@deanmorgan2434]

How much does this turn key opperation cost

[@deanmorgan2434]

I have a location in mind for this item

[@YasiMJ]

Wat is the capacity

[@lahorigoldsmith8570]

very nice

[@estebanwedontneednostinkin9969]

It’s so clean and you know it’s gonna get dirty🥴😬

[@mohmmadalsubai4282]

How much is this machine, and do you have shipping to Saudi Arabia?

[@gurpreetmanoor9500]

Good nice work

[@UbuteyAustralia]

I notice that the material is not of a ore nature ,just mostly soft fill