Golf Ball Case - DIY golf ball holder In The Hoop Embroidery design

6x10 hoop - In the Hoop Machine Embroidery Golf ball case with side tee holders. Fits 3 golf balls and 4 tees.
Design can be purchased in the ThreadMode Etsy shop :
www.etsy.com/ca/listing/10062...
Materials used in tutorial:
Vinyl for outside
Felt for backing/lining
9mm double cap rivets with a 9-10 mm post length
Metal button snaps (Buckleguy. com)
3/4" D-ring swivel clasp (or lobster clap)
Lightweight tear away stabilizer
Hoop size shown is 6x10 (150x260)

[@ritajanemiller]

Great Pattern.....Great Video....Love it!!! Thank you!

[@lemonsqueezycrafts6818]

Love this!

[@v.r.sumner9693]

Very unique! Thanks for the video. Love your tip on using the cardboard and knife to cut off the excess tabs. I'll be getting the pattern!

[@threadmodeembroidery2374]

Thank you :)

[@amc16744]

Cute design! I just purchased a few of your patterns. I'd love to see a video on the trifold wallet with zipper.

[@v.mishrasart43]

Excellent

[@renepellissier7308]

Very nice. Thanks

[@Gatornanny]

Must be my lucky day to find your video. Really like your designs purchased this one and also the puppy poo bag holder would you please a video on the poo bag holder

[@threadmodeembroidery2374]

There is a video for one of the sanitizer holders that is very similar to poop bag holder. The only real difference is the size and the poop bag holder is easier to use with the back grommet

[@threadmodeembroidery2374]

This is one of the sanitizer holders. kzbin.info/www/bejne/b5m1ZIarZ6qikJY

[@vieuxacadian9455]

Interesting use of an embroidery machine . I still hand sew leather using the double needle saddle stitch method .

[@threadmodeembroidery2374]

I wish I could sew leather by hand, the saddle stitches look so wonderful ! I have some finger issues which is why the emb machine works well for me. I do watch a ton of leather making vids

[@christinenoble4733]

Love this and wish I could buy it but my largest hoop size is 5x7 :(

[@threadmodeembroidery2374]

Sorry I don’t have a 5 x 7 available at this time.

[@elsiet4806]

We adorn the same jewellery, I wonder if we may even share the same condition also. I came across your video via etsy.I am struggling with brain fog and trying to follow instructions is a real mission. I am about to watch this video in the hopes I can get on today. I wont cross my fingers though lol.

[@threadmodeembroidery2374]

Very possibly, I have hEDS, the ring splints are definitely a visible tell tale sign lol. Hope the design stitching went well.

[@elsiet4806]

@threadmodeembroidery2374 I thought as much. I have Ehlers danlos etc (The etc as you know can be so much) I hope you don't struggle too much and good days outweigh the bad. 🌻💜🌻 All the best. #HypermobilitySyndrome ##EhlersDanlosSyndrome

[@yongxingolf5420]

Yongxingolf gift factory congratulates it

[@silviacraucamp9626]

Loved the video - very understable- where could I purchase the design from please

[@lauriebasile1]

Could you please provide some information on your rivet hammer and anvil?

[@threadmodeembroidery2374]

The rivets and hammer/anvil I use are from Buckleguy.com. I like the tools they have and they also provide detailed videos on how to use them. (no affiliate)

[@ufoquilter86]

What is the best type of vinyl for these?

[@MakerandDreamer]

Hi first time on your channel. Thanks for this tutorial. I was wondering can one add monogram to it? These look great thanks again for the great video

[@kerryalldritt3859]

I added a name - choose the font wisely so it is not so dense that is cuts out the faux leather

[@threadmodeembroidery2374]

Yes you can add anyting you'd like, but you do need t make sure the design or font chosen will work on vinyl.

[@revacampbell2851]

do you have an angel policy fo this design

[@ufoquilter86]

I have been waiting to make this one! Does this file come with an SVG as well?

[@threadmodeembroidery2374]

Hi, no. None of the files come with SVG as I don’t have a cutting machine to use for designs.

[@afran7855]

I was meant to watch your video. I was looking for a golfing gift to sew for a friend and clicked on your video. Then I noticed your finger braces, and I knew what they were because I use a couple myself, then I noticed your thumb/wrist brace? Omg! Can you please explain this device and tell me what it helps and where to get one.? I have recently developed horrible pain in the base of my thumb down to my wrist, and it’s hindering me from doing what I love. My fingers get locked in the bent position and my wrist hurts so bad, my finger joints hurt so bad as well,but I have no idea what’s causing all the pain. I was told I have a trigger finger and possibly carpal tunnel, but definitely no arthritis. So I just suffer and cry myself to sleep most nights in pain. I’ve been using a couple finger braces on both my middle fingers, and using compression gloves all the time and ace bandages on my wrist and thumb on right hand, also been sleeping in wrist braces for last 2 years. Anything you could tell me about your devices and any advice to help the pain or what to get my doctor to look at I would be extremely grateful. ❤. Also thank you for the instructions for the golf ball holder. It’s adorable.

[@threadmodeembroidery2374]

Hello, sorry to hear you are dealing with hand/finger pain, it is no fun at all. The ring splints are for loose ligaments as my fingers and thumb bend to far backwards. The thumb splint is not for the wrist it just keeps it in place better with that wrist band. They are from Digi Splint.

[@lucyreed9696]

Do you have any links to the rivets & snaps? I searched buckleguy and can't find what you are suggesting. Thank you.

[@threadmodeembroidery2374]

Did you get the info you needed from the FB group ?

[@lucyreed9696]

@@threadmodeembroidery2374 yes I did. Thank you.

[@mona1949]

Where do you purchase your Rivets?

[@threadmodeembroidery2374]

I get my rivets and set tools from Buckleguy.com, they are great quality I've never had any issues setting them.

[@Iris_inspired]

Hi I just found this and it's just what i was looking for! Does the pattern include printable pattern peices? Would it be possible to hand cut and sew on a sewing machine? I don't have an embroidery machine but regularly sew vinyl on my sewing machine.

[@threadmodeembroidery2374]

Sorry no the design is solely for embroidery machines no pattern pieces included.

[@charlishafiroffnelson441]

Can you use a 6x10 repositional hoop for this design?

[@threadmodeembroidery2374]

I am not familiar with repositional hoops so I cannot answer that question. The design fits a reagular sized 6x10 hoop.

[@lauralynngibbons1091]

Can you print this with a cricut and hand stitch?

[@threadmodeembroidery2374]

Hello, No sorry I do not sell files for the cutting machines, I only sell the files for the embroidery machines.

[@ufoquilter86]

Do you have a link for the exact size rivets you use please?

[@threadmodeembroidery2374]

I mostly use a a double cap, 9 mm cap with 10-12 mm post length rivet. I get mine at Buckleguy, but wherever you purchase the rivets from you need the same setting equipment they sell for their specific brand.

[@kimberlyarmstrong2929]

Very disappointing that you felt it necessary to fast forward the assembly, especially after such detailed instructions up to that point.

[@cakedesigner]

If you go to the settings wrench icon in the video screen (bottom right) you can select a slower speed to playback at.

[@lemonsqueezycrafts6818]

If you’re watching on an iPad it’s the three dots in the upper right corner. .75 is about right to slow it down in most places and .5 in others.

[@SusanIsbell-gq2mp]

Where can I buy the pattern for this?

[@threadmodeembroidery2374]

Patterns can be found on Etsy or on the ThreadMode Embroidery website.