Golf Clash tips, Key TIP - Adjust the right amount of rings - Guide!

[@golfhack3581]

A couple of months ago I started pulling across or over the bullseye after watching your Golden Shot tutorials. I used to pull 'to the bullseye', but noticed it's hard to know exactly where the center of the bullseye is because it's a bit blurry. I just have to do it the same way every time to get consistent. Thanks Tommy!

[@klaybiggins4040]

I’m glad you said that because what does it mean to pull over the bullseye? I never feel I have it lined up correctly. Consistent almost made its.

[@mrianwatson]

I have a headache now. A fun game is now advanced mathematics. 🤣🤣

[@abhishekkumar2881]

OMG.. I am waiting for this game to evolve when for a particular hole - Playdemic gives wind speed as 5.82 units, golf clash streamers explaining elevation as +11.37%, club distance as 47.38% of max, 2.38 top spin, 3.47 left spin, ball guide to deviate 4.75% of hole radius left from center. That day, - 40 would be a new normal score for tournament and people will start complaining most about "out of time".

[@lifewithbunty]

This is a huge problem in the community Thank you for finally addressing this I feel like most players figure out after a VERY LONG time and then they go back to being quiet since they figured it out I've been using the bullseye method inconsistently and helps explain my misses at least 55% of the time This prevents me from leveling up. Thank you very much I would like to say more mechanistic videos like these are much appreciated (most people who are already 1000+ trophies wont find it useful)

[@roetaylor4824]

Guess I need to go apply this method! Just like the player you described. I too have been experiencing this problem with my pull. I use to adjust over the bullseye but then stopped. I have gotten more drops since then, but also some inconsistent shots as well. I’ve even went back and watched your adjustment videos trying to figure this out. I have noticed when you recommend in the videos to add 0.2 or subtract 0.1. I nail the shot every time. I don’t know why but it work!

[@JMart6]

What’s the best way break up shots with winds high enough to have 2 pulls? For winds like 14.5 with sniper I usually pull 9.5 and 5. Or would 8.5 and 6 be better or the same? I would guess better because 8.5 and 6 goes over bullseye.

[@andreykogonovich8182]

7+7.5

[@dr.gregoryjohnlee2008]

Tommy, awesome as usual. I use one of the ring guides on the market, I presume they are typically not adjusted for this. I also pull to or from the center and realise now that this makes for potential inaccuracy on both ends of the pull, I like the idea of using a ring edge.

[@jaymclaurin4099]

I understand totally what you are explaining. My question is how do you adjust. Are you zoomed in or zoomed out like an area view? I have trouble seeing where to pull sometimes

[@suebuckley4366]

Great video that helps explain why you might be missing those clutch shots rolling over the cup edge. It is all about those fine details. Thanks Tommy!

[@GaryBrooksIFA]

thanks Tommy, i've always struggled to understand how you can make a single pull for 8 rings now i know !!!! many thanks !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@Igniting-Moments]

This is a very important video. i watched your golden shot and other videos and realized that you pulled over the bulls eye when it did not have the guideline running through the center. Since i started using it, my game has been more accurate. Much thanks.

[@davidgoguen8223]

Thank you so much for this information Tommy!! I have burnt so many edges in tournaments on good setups with "Perfect" balls. There were at least 3 this past weekend. I almost quit the weekend round. You are awesome sir. Thank you

[@scottyoung670]

Just a thought after watching this....I'm thinking for example if you need to adjust 2 rings, and you use the bottom, or the middle (actual center of bullseye), or the top part of the bullseye, it would yield 3 different outcomes. Since, it is 3-dimensional, the bottom is bigger and the top is smaller. Therefore, I think we should adjust equally over the bullseye. I feel this will give the best average and most accurate. Meaning, for example, 8 rings would be inside white to inside white. 4 rings would be inside blue to inside blue, etc. I know it rarely will work out perfectly like that, but following that somewhat I think might be the most accurate way to adjust using the apps. It'll definitely be a work in progress. Thanks for your hard work and guides Tommy!

[@shooom958]

thnx tommy, explains a lot. it's so frustrating just missing and knowing you have the adjustment right

[@bladeeric7470]

Tommy it just dawned on me this is also the reason I’ve spent gobs of money with little to no drops on golden shot by following your advice to a T...except I don’t adjust the same way you do. I will now.

[@shonpistoll]

If I need to pull five rings, I always start at the inside of the white ring and pull to the top of the yellow ring. I always pull over the center. If I have to pull four rings...I go from tip to tip of the red ring, moving over the center. If I have to pull ten rings I pull from tip to tip of the white ring.

[@iamjim7237]

same here. i end my adjustment in the center of the bull’s eye. that’s why sometimes im wondering i adjusted correctly but i missed the shot. now we know hahaha i hate math! 😂

[@bangpwr]

@@iamjim7237 if you need like .2 more rings do add that at the end of whole number rings?

[@brentmusgrove9594]

Interesting Tommy that is super strange but I will definitely follow your directions thank you , most of the time I pulll over the bullseye but occasionally I do not so very good to know.2 is definitely the difference between dropping the shot or just missing on the edge which happens to me quite often leaving me scratching my head when I know I did the adjustment correctly so definitely will be keeping this in mind

Cool stuff Tommy! This vould actually explain alot of frustration for my part. Ill keep you posted of progress. 🤘

[@bdub440]

Thanks Tommy. The hole I played after watching video was number 7 in Safari tournament and I aced it.

[@iamjim7237]

I see now. Got it Tommy! thank you very much. need to practice that over the bull’s eye adjustment.

[@kylelowe4618]

Wholly shit Tommy, this is amazing! It took me 3 times watching this video to completely understand what you were trying to portray, and it all makes sense now! Thank you man, this is an absolute game changer. I have at least 2 or 3 shots per tourney where I burn the edge or lip out. Now with this information I shot -14 and -15 on my two accounts for today's mini tourney round in masters! I hope your ready for some masters competition now 😉. I am pretty consistent at getting top 10s in expert, and several top 3s, but now knowing this I am finally ready for masters (plus I finally got my apoc 7).

[@emsforlife]

Help a lot I know it going to take practice. Thank you Tommy

[@turntbyhi-lo3516]

What are you supposed to do when, for example, you have an eight mph wind, and hitting a 100%club? You can only pull down so far before you run out of screen. OR, the take shot button kicks in. THAT is the issue I'm having. BTW, shot 61 under, on two accounts, in the safari sunrise tourney this morning.

[@goautosalesakajosh283]

Great info as always Tommy. Thank you so much for letting this fact be known to the Golf Clash community!

[@Monalisa-si1vw]

Well when adjusting in a direction that Is not dead 90° to the ball guide the target expands and contracts so if u dont get this right ur target will expand or contract at a different rate even in draw back, so if you set ur take shot at five rings a pull back in a tail wind shot, even thou u pull to the bullseye its not actually five rings ur pull coz the target shrinks as you pull back, so if u take the shrinkage out of the equation ull end up with a different adjument

[@jamm6676]

Wow!!! Thank you sooo much!!! This explains a lot...💥 I always miss or come up short on the long /short game.

[@chuckj6784]

I never knew this was the best way to pull ...thanks for sharing tommy 🙏🏾🙏🏾💯

[@AvStevieStevenJamesDrums]

Tommy, please use video to show the actual shots not replays, the replays don’t show what your are doing. I understand the concept, but show shots that require 8 rings, more detail with regards to pulling over the bullseye. Please. Thanks you for always for your tutorials

[@Lordzapper]

So what should we use then? To bullseye or through. I rarely use your adjustments due to different yards, club, level of club or ball. But both your ringcalculator and notebooks when they say x rings, do they mean to bullseye or through. Which one is more right according to ringcalculators? If you know what i mean in my swinglish.

[@nitekid11]

This is bugging me greatly too. The numbers that reflect on the windchart I suspect is not through. I might be wrong.

[@drd4u]

This is so cool...hadn't thought of it, told my clan to check it out. Thank you -:your tips are Right On🏌️‍♂️

[@Iamme-58]

Golfclashtommy How do I count the rings?

[@scottmaulo1968]

So when doing this the bullseye equals 2 rings if I’m looking at this correctly?

[@RobNorman08]

From the centre of the yellow ring to the outside edge of the yellow ring (radius) = 1 ring, outside edge of yellow to opposite outside edge of yellow (diameter) = 2 rings, from what i understand on this video, outside to outside of the yellow ring is actually 2.2 rings. From that i guess there is an absolute centre spot inside the yellow ring which has a diameter equal to 0.2 rings..

[@shocky3260]

That's how I understand it. Each half of the bullseye is one ring

[@TimothySlickback]

Now I see why some shots are over adjusted with my thorn. If the bullseye equals 2.2 rings and I have a wind say 9mph which with the thorn 9 equals around 4.5 rings 10% elevation. I'm actually pulling 4.7 rings. That extra .2 will cause your ball to roll a ring outside the pin. Just that small amount makes a big difference. Now I understand!

[@xburt_]

Tommy the legend. Thank you for this info, very helpful!

[@kylelowe4618]

The only thing I still dont understand Tommy, is how do you do a single pull when for example, you have a 12 mph wind with a max distance sniper? Cause you cant pull 7 rings thru the bullseye, can you? If you could explain i would really appreciate it

[@KyraStitch]

Dude I posted this on golf clash elite last week. Everyone said I was dumb. And didn’t know what I was talking about.

[@damnson182]

How did you guesstimate 2.7 rings from 8.0 wind? I can never guess the wind when your shot is close to the green. Thanks!

[@YakNepal]

Tommy, I hope you will be pulling over the bullseye in future videos. It is much harder to pull to the center of the bullseye. I never do it that way.

[@spkngrmn]

An issue I have is how much do I zoom in to the bullseye before the pull adjustment? Meaning how large to make the bullseye on screen before the pull. I see people zoom in close making the bullseye huge on screen, then others not. I'm confused. My shots have been all around the hole with few drops lately . Frustrating

[@mbarevalac257]

Hi Tommy, could you do a video and an explanation of why and how to use the slider? Thanks in advance!

[@cllyde]

What are you referring to as 'wrestle' at 6:55?

[@virginie8000]

So, as i’m using the wind assist of the Notebook app, do i have to add 0,2 (or x % dependind of the club) , to substract 0,2 (or x % dependind of the club) or do nothing if i pull over the bullseye ? Or if i don’t ? 🤔. Conclusion : wich model the Notebook app considers ?

[@aelliott014]

This is my question as well, anyone have an answer?

[@Monalisa-si1vw]

Iv taken these fine adjustments to the nxt level in my opinion but still a way to go to dial in to perfection but if intrested Tommy message me u will find it interesting if not known already

[@GolfClashTommy]

You are very welcome sending an email to [e-mail]! Would love to hear it.

[@timothykekeyjackson6930]

I don’t understand!! Do you start measuring at the bottom of the bullseye or the top and go from there

[@timothykekeyjackson6930]

Why is the cursor above the bullseye and not below it?

[@pablostwhite9141]

That is Really easy to understand.

[@brianbaker6635]

Thanks

[@mikenugent4]

So what do you do with a wind of 10.3? how do you move that many rings

[@bradsteele3638]

How do you adjust for head cross wind when your at max distance of club?

[@royhenson3379]

Awesome Video Tommy Lofberg, Can you do a Review of the Rhino Ball Please & Thank You..

[@WhoCares-AB]

M confused now. I checked the wind guide and it says it’s 2.3 ring adjustment. Why are you pulling 3.7. Have I been doing it wrong the whole time

[@gca2223]

So I can just add 2 decimals to be accurate if I am not pulling over the bulls eye?

[@GolfClashTommy]

No you can not I would say as I believe it will be different from club to club. But again, I have not been testing it enough to give you a 100% answer.

[@gca2223]

Ok thanks

[@BKGolfClash]

I’ve just measured lots of pictures of the entire target - different clubs, different zoom levels etc.... The diameter of the yellow ring is consistently larger than the distance of the red and blue ring combined. Approx 10% bigger - which would explain the difference of 0.2 in the adjustment methods.

[@gca2223]

Interesting I have never measured them

[@gca2223]

@@BKGolfClash woulnt that mean that you dont want to pull through the yellow? Pulling through the yellow would add .2 rings when you dont want to add .2 rings?

[@ronperryman]

Probably explains why I lip out 12 balls every tournament. 🤦🏿‍♂️ Thanks for this video.

[@gregf2210]

This video is good but it led to more questions. Are you saying that you shouldn’t adjust to the middle of the bullseye because it isn’t an actual line and because it’s not a line, it can lead to inaccuracies? Are you saying that the width of the entire yellow circle is somehow .2 rings wider than 2 rings? What about if you are pulling through the bullseye and you found that your finger just drops off the screen then you have to scramble to evaluate your ring position to compensate?

[@BKGolfClash]

Some may disagree, but see my reply above - I’ve just measured loads of targets from different guides / clubs etc - the yellow circle is 10% wider than the red and blue widths combined.

[@gregf2210]

So if that’s the case, the yellow ring really should not be used at all in the pull. A full pull of 10 rings really is 10.2 rings? Outer white edge to outer white edge is 10.2 rings? Mind blown

[@BKGolfClash]

Greg F According to my measurements, a full target is going to be 10.2 rings. That’s the only explanation for how the two different adjusting methods differ in result.

[@raygun258]

@@BKGolfClash Thanks for the additional info that compares different clubs' targets. It appears that every target's yellow ring is an extra 0.2 rings. This does explain a number of close misses!

[@noisybrat8410]

I can understand always doing the same type of pull to be consistent. But can explain WHY it’s more rings when pulling over the bullseye? I usually pull to the bullseye. Is that same as pulling to before the bullseye, ie less than pulling over the bullseye?

[@scottstewart8737]

I dont understand what you're talking about

[@Mr05Chuck]

Scott Stewart me either

[@jonathangubitz3071]

Jesus Christ me neither wtf is a ring and how is he adjusting a single ring? Wtf is 1.5 rings

[@chrislord9872]

I like cake

[@bladeeric7470]

IMO this is a glitch that Playdemic should resolve. A ring should be a ring.

[@pandafield918]

The issue is when you move the rings (adjusting or otherwise) they will change size - smaller as you pull toward minimum/you and larger as you pull toward maximum/hole. So by adjusting through the bullseye, you are “moving” rings that are closer to a consistent size from the adjustment point.

[@nealsmith9729]

I always start from the white line and move from there.

[@steventhornton4506]

Honestly it looks like you went 3.9 both times with the cursor. The pull just before 06:50 that you call 3.7 looks like 3.9 anyway, so it wasn't a surprise when you got to 3.9 measuring it the other way. I don't think this is a thing...

[@BorisNikolaiKonrad]

What is the best way to calculate winds? If I use golfclashnotebook.io/tools/windchartcreator/ and then add the elevation percentage to the the wind, I do not typically get the same values you are other streamers say.

[@scottmaulo1968]

Boris Nikolai Konrad a lot of streamers use the slider as well so that might be the difference

[@johnquartuccio9271]

What the heck do you mean pull over the bullseye????? I cannot understand you. I'm not getting this and it's very frustrating. I'm losing all crazy. My shots aren't going where I'm expecting because I'm not knowing what the hell I'm doing. I jus got notebook for golf clash android. But I'm watching your videos and can't grasp it. I don't know what you mean and you keep saying it.

[@johnquartuccio9271]

Could you please break this down into mute slowly and detailing

[@gearinup8149]

None of this makes sense... how do you know how much to pull over the bullseye, have watched countless videos and none make sense

[@stevenfowler6739]

so confusing. whats a ring, starting from where to where? ugh

[@gordonsim4176]

I can’t understand what you mean by saying both “always pull over bullseye” and “never pull over bull eye”?? 🤔 I’m trying to go up the tours and want to be more accurate in high winds but I’m finding your videos hard to follow bro

[@matthewrobertson7255]

He means stick with what you know. If you ALWAYS adjust through the bullseye keep doing that. If you NEVER adjust through the bullseye then keep doing that. I’m still confused though

[@johnquartuccio9271]

Bro the text in your videos says... As you know I'm sure. * Always pull over the bullseye. *Never pull over the bullseye, * Body blah blah hgfgigifyicm BBC fe

[@pumpkinop5566]

i am so lost .

[@fuzzywuzzy4193]

This I just don't get.

[@atalantadebendern8627]

I cannot follow this. It’s confusing me

[@ZkGaming.89]

2 year ago

[@Teuser737]

Sorry I do not understand one bit of it.

[@kevindouglas3972]

I never even thought to use cursor i always use shot button

[@GolfClashTommy]

I don’t use the cursor in regular play. I only used it to trying to display the point I were trying to make :)

[@matthewrobertson7255]

Kevin or Tommy, when using the take shot button are you going to the top edge of the orange box or are you going through it and your bullseye is replaced by the box? Please clarify thanks!

[@kylekrazy3062]

the emperor wants to control outer space, Yoda wants to explore inner space; thats the fundamental difference between the good and the bad sides of the force. Just dont know where it comes from some times.

[@Kalkisena]

Dear Tommy, please repeat email ID.

[@spojce9]

ugh this complicates things...

[@spojce9]

Tommy, what does this mean for the situation where I'm using golf clash notebook, or another app, and I have exactly a mid-distance shot that calls for a 4 ring adjustment. What is that 4 ring adjustment - should I adjust over the middle now? Are we saying that a generalized ring system without stating 'over the middle' or 'not' is flawed?

[@kevinskndad63]

Just confusing. Pulling over the bullseye? You should do diff. graphics as noone can see your shot button. No offense but your English scrambles the brain.

[@markwilliams5511]

Your just talking jibberish, I ain't got a clue what your on about. You need to explain a lot better.

[@markmasters1871]

Russian communist that’s now a playdemic loving capitalist. What happened to the proletariat and is he now a bourgeoisie? So much for unbiased opinions??