Performance comparison of Quiet Series MAC210Q & MAC320Q Here is a link to the 2 gal model on Amazon amzn.to/3b8rVbN Here is the 3 gal model amzn.to/37hRNk2\ These are paid links. No cost to you.
Пікірлер: 48
@theupsideofdownsizing3 жыл бұрын
Very useful information. Thanks for the comparison. I was ready to pull the trigger on the 3 gallon model based purely in the specs but your real world comparison had me rethinking my decision.
@Berdihan_outdoors2 жыл бұрын
You sold me a 2 gallon sir, originally was thinking 3 gallon. Update: 2 gallon arrived and i love it. Cycles lot but it is ok since it is quick and quiet. I use it for 22 gauge fine wire staple gun.
@wideeyesshalom55602 жыл бұрын
Can I use it to blow dust from electronics.
@Berdihan_outdoors2 жыл бұрын
@@wideeyesshalom5560 yes you can
@charliethompson704210 ай бұрын
I bought the two gallon this morning. I appreciate your video. I believe that I made the right choice!
@bobelliott27482 жыл бұрын
About 7 hours ago I bought the little one...one gallon. I used it for three brad nails about 3 hours ago. Can't be beat for the price point. I have a big compressor in the garage but this is perfect for my house use and very portable
@erocnw1341 Жыл бұрын
Are you still happy with the one gallon compressor after a year?
@Frindleeguy Жыл бұрын
@@erocnw1341 It's a Makita
@rachavya2 жыл бұрын
The very most important take-away for me is that either the 2 or the 3 gallon model can drive a big-nail gun. At the Maui Home Depot the prices are $229 and $259, respectively. I can see being tempted to get another 1/2 horsepower for only $30, but, if the big one is only marginally better at driving big nails, it's best to save the weight and go for the 2-gallon model. Furthermore, it doesn't draw enough amps to risk blowing a breaker.
@aaronhackbarth80052 жыл бұрын
Fantastic demonstration. You covered everything I wanted. Thank you!!
@liedebunker12532 жыл бұрын
Very thorough review. Just what I wanted to see. Thanks!
@williamhart46612 жыл бұрын
Thanks! Changed what I orderd based on this, saved $60
@arthurgriffin12102 жыл бұрын
I liked that review, because I don't know how much longer my Senco 1 gallon is going to last on my smaller projects. Thank you
@policedog40303 жыл бұрын
Very well done review! Regarding Makita's design - it is probably just me but I didn't like that the frame is welded onto the tank. This probably would not make a difference for most people and even for me wouldn't matter until the thing is ten years old and I go in to modify or repair it. Plus, during manufacture everything really has to go right on those frame to tank welds and I would wonder if it might make a brittle or corrosion susceptible region on the tank (since those two spots become annealed differently than the rest of the tank by the heat of the welds). As a comparison, the HF one I believe the tank just bolts into it's cage or frame so it can be completely dissembled and hopefully reassembled :-)
@foodparadise57923 жыл бұрын
Very insightful comment.
@TedBruckner Жыл бұрын
Porter Cable, (for example), has label on tank to retire it after 10 years from manufacture date on tank for safety reasons. Maybe for you that's irrelevant but for most users it may be wise; or just being good little consumers.
@Mr.J345 Жыл бұрын
Watt meter to see how much they draw would be awesome,great comparison anyway
@Bob_Adkins3 жыл бұрын
Thanks for this! For the noise DB to be meaningful, you have to specify a distance. Sound decreases a lot every time you double the distance. I'm sure Makita took the reading at a standard distance of 5-6 feet, about like when you're finish nailing.
@108hindu3 жыл бұрын
I believe the standardized measurement distance is 3 feet. If I’m wrong I would love to be educated more about that.
@Bob_Adkins3 жыл бұрын
@@108hindu Not sure myself Marko, but it would be nice if the manufacturers specified the distance. There's a huge difference in 3ft, 5ft, and 10ft, so without specifying, it would be easy for them to fudge.
@scottvance743 жыл бұрын
In addition to the distance, you would need to have an anechoic test environment so that you're measuring the noise from the device and not reflections of the noise. It's not as straight forward as the presenter seems to think.
@CowsGoM3ow2 жыл бұрын
@@scottvance74 Called a reference point. The 3 gal is a few db louder. Feel free to setup a anechoic test enviroment with a accurate db meter using Makita's unspecified distance. Lol
@steppedon2 жыл бұрын
This is KZbin. Not the Center for Audio Research of America, Bob. The camera was an equal distance from both compressors and gave me exactly what I needed to know.
@donalddaniels58482 жыл бұрын
It did not loose air, the air in it cooled down thats why the pressure dropped
@BGood496 Жыл бұрын
Then why didn’t it do it on both.
@Dnasty17 ай бұрын
Great review but I must wonder how all these compressor companies go about ranking the db levels. Not one of them has ever been accurate. And makita has another model that claims 58 db its ridiculous they would be so specific yet so inaccurate.
@kylere7953 жыл бұрын
like someone else mentioned, your sound test isn't accurate. I'm sure the compressors being in a confined space, as well as being right next to each other and close to other hard surfaces, allows the sound waves to reflect and reverberate, thus contributing to a higher reading. It'll def sound louder being in an enclosed room as compared to an open jobsite
@mikebythesea453 жыл бұрын
The test may not be laboratory accurate, but it’s close to real job site working conditions. Inside a confined room, may or may not be 6’ from a person’s head.
@tomfrantz4 ай бұрын
Great video
@MrGdbsti053 жыл бұрын
2 gal. is were its at thanks for the video
@LKline81 Жыл бұрын
Thanks!
@bocty1 Жыл бұрын
was hoping these were the new 40v compressor
@julieleeds3041 Жыл бұрын
Is the 2 g sufficient to blow out lines closing a pool?
@joselima7655 Жыл бұрын
those allen edmons?
@SiXX51502 жыл бұрын
Question about the 2 gallon… does it “rattle” when you first turn it on and charge from empty? For the first 5 seconds or so - then immediately quiet down?
@BGood496 Жыл бұрын
Yes.
@pow96062 жыл бұрын
How much juice (watts) do these things take?
@AndToTheRepublic4WhichItStands2 жыл бұрын
Can it run an impact gun tho
@Agent77X3 жыл бұрын
One gallon is the best only 26 lbs. 2 gallon 38 lbs.
@seanmurray93653 жыл бұрын
Just curious can the 3 gallon compressor fit in the back of my trunk? I have a 06 nissan sentra....i just bought the 3gal unit but still waiting for it to arrive.
@TheVoidMMA2 жыл бұрын
Does anyone know if this is good for nailing baseboards and stuff like that?
@Frindleeguy Жыл бұрын
Yes, perfect for that. If you have electricity it's golden.
@randywl8925 Жыл бұрын
@@FrindleeguyI bought the one gallon model for doing that. The one gallon wouldnt work if two guys were cutting ahead of you and you were just chasing them fastening brads, but for a on man show, and small jobs, the 1 gallon is a dream. Unbelievably quiet.