Trouble with our John Deere Baler

  Рет қаралды 34,795

Golsch Hay Farms

Golsch Hay Farms

Күн бұрын

Пікірлер: 24
@RightmireJ
@RightmireJ 6 жыл бұрын
Love the videos guys! Keep the good work up. Us guys at Fort Hood love yalls videos!
@maynard5955
@maynard5955 6 жыл бұрын
Baling hay with no beer is like not not having any wrap!!!
@ronnierivera3991
@ronnierivera3991 5 жыл бұрын
I use the Milwaukee M 18 grease gun. It was a game changer on greasing. I have that lock lube grease for about 5 years only had to rebuild it once. Also have the longer one but I have more problems with it in the year or so I’ve had it.
@oby-1607
@oby-1607 5 жыл бұрын
I have 2 Lincoln grease guns and have had good luck with them. Some people love them and some not. I just got a Milwaukee electric grease gun and gonna see how that works too. I have over 40 different pieces of machinery to maintain here at home so I go through a lot of grease. Just the excavator alone will use up 2 tubes of grease itself before using it for the day. Grease is your best friend along with frequent oil changes.
@mirrorimagecattleco
@mirrorimagecattleco 6 жыл бұрын
Had a Lincoln liked it, but the batteries were junk on them. If you need some rain I'll send to ya'll. Cant seem to go more than 3 days without it here in TN.
@DLKHAY
@DLKHAY 6 жыл бұрын
I could see your breath at the start of the video, what would the moisture content on these bales be? Dewalt here and love it with the lock and lube.
@jacersk5501
@jacersk5501 4 жыл бұрын
You might not want to do this but this is a trick we have learned for getting the net rap off the roller if you get one of those miny torch lighters it melts the polyester net rap in seconds
@PaulHigginbothamSr
@PaulHigginbothamSr 5 жыл бұрын
Looks like not too heavy on the material but still turning out good product.
@myidahohomestead.7123
@myidahohomestead.7123 5 жыл бұрын
When was the last time if ever you cleaned the brush on the knife and checked the knife for the proper clearance? If you have the right clearance so the net gets cut clean you won't have bad edges that fray and wrap around the rollers.
@derekv4649
@derekv4649 6 жыл бұрын
Get a little hand torch and it’ll burn that stuff right off the rollers
@codygreenwood1014
@codygreenwood1014 6 жыл бұрын
Do a tour of your truck
@lanceblanton8215
@lanceblanton8215 5 жыл бұрын
How many acres y’all cut total?
@tylerjohnson5228
@tylerjohnson5228 6 жыл бұрын
How does that rake do on rough ground
@theThinkerator
@theThinkerator 4 жыл бұрын
How well does the baler pick up the flat hay in the middle that the rake misses? Do you have the pickup teeth into the ground?
@sunsetfarm8517
@sunsetfarm8517 6 жыл бұрын
Nice video, keep them coming. Question - how do you charge when you bale for someone else? By the bale, by the day?
@MCatSHF
@MCatSHF 6 жыл бұрын
Hello H&G Land Management I guess that you get no morning dew in New Braunfels, TX? When a guy can go out & rake the hay while it's still tough from the morning dew & not shake off all the nutrient rich leaves on the hay.
@marcuswood3255
@marcuswood3255 6 жыл бұрын
What did that rake cost
@marcuswood3255
@marcuswood3255 6 жыл бұрын
Is it worth it in time and diesel
@dedrakuhn6103
@dedrakuhn6103 4 жыл бұрын
It's so nice to turn the volume to the perfect level so I can hear what you have to say, and then it's awesome to have the music blairing 3 notches too high that my ears hurt on my Bluetooth. I didn't like my hearing anyways. Nice video otherwise
@rrmtnfarmer3273
@rrmtnfarmer3273 5 жыл бұрын
How well does this setup do in the corners and on turns as far as leaving hay behind?
@rrmtnfarmer3273
@rrmtnfarmer3273 5 жыл бұрын
@@GolschHayFarms Yeah that makes the most sense and I don't know anyone that likes baling curves. Do you know if there are any rakes smaller then yours offered? I've got a design I'd like to build at somepoint where its just incorporated into the baler but that takes time I don't really have.
@thomaswilson2tw
@thomaswilson2tw 6 жыл бұрын
do you use cover edge?
@thomaswilson2tw
@thomaswilson2tw 6 жыл бұрын
H&G Land Management I went to edge to edge on my 468 and it stop doing it
@braylendavis1081
@braylendavis1081 6 жыл бұрын
How much is your hay
WE BEAT THE RAIN! - John Deere Baling Hay with Vermeer 604N Select
16:39
Golsch Hay Farms
Рет қаралды 59 М.
JD 567 baler maintenance
9:19
OldGlory
Рет қаралды 22 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН
To Brawl AND BEYOND!
00:51
Brawl Stars
Рет қаралды 17 МЛН
15 BIZARRE AMERICAN TRACTORS YOU WON'T BELIEVE EXIST
21:50
Vintage Machines
Рет қаралды 154 М.
This Wrecker Will Rescue The Worlds Largest Off-Road Wrecker!
28:16
MURPHYS DIESEL
Рет қаралды 294 М.
Feeding Hay in the Pasture with a Bale Processor in Central MN
13:13
Woller Equipment Inc
Рет қаралды 984
WATCH THIS BEFORE you BUY a USED JOHN DEERE ROUND BALER
14:38
Texas Filipino
Рет қаралды 66 М.
Saving Abandoned Tractor: Will It Start?
22:00
Laura Farms
Рет қаралды 172 М.
Hauling Hay - Heavy Weight with a Ram 4500 Cummins
8:39
Golsch Hay Farms
Рет қаралды 235 М.
We're Still Baling Hay in December - Texas Hay Baling
15:36
Golsch Hay Farms
Рет қаралды 11 М.
How To Operate A Round Baler
9:05
How Farms Work
Рет қаралды 264 М.
JD BALER MONITOR SETTINGS
6:47
Andy White
Рет қаралды 72 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН