GoodWe HomeKit // Smart Energy Consumption Meter / Is It Worth it ?

GoodWe Home Kit Smart Meter: bit.ly/3NCwVH2
Windows 10 pro (14.74€): biitt.ly/AMvuC (30% : RJCK )
Office 2021 (44.54€): biitt.ly/4rROk
** As an Amazon Associate I earn from qualifying purchases.
✅ RECORDING GEAR: ✅
🅿️ Sony ZVE-10: geni.us/SonyZVE10s
🅿️ Sigma 16mm F1.4: geni.us/Sigma16m
🅿️ Canon M50: geni.us/CanonM50ss
🅿️ Canon M200: geni.us/CanonM200
🅿️ Canon M100: geni.us/CanonM100s
🅿️ Canon 22mm 2.0: geni.us/Canon22m
🅿️ Go Pro 9: geni.us/Gopro9s
🅿️ Canon 650D: geni.us/Canon650D
🅿️ 50mm Lens: geni.us/Canon50mm18
🅿️ 24mm Lens: geni.us/Canon24mm28
🅿️ Drone: geni.us/DJIPhantom3S
🅿️ Office Lights: geni.us/Aputure672W
#goodwe #solarpv #smartmeter

[@melberg9098]

Nice thx for the vid RJ

[@dmk1802]

Great video,which one can allows to use excess photovoltaic production to heat water?

[@WadeAbout]

So does the HK1000 connect to home assistant ? I have the inverter and need the hk1000 in HA

[@asadrazanaeem6604]

Great comparison 👍🏻 What’s the difference between GMK330 and HK3000. I have a GoodWe “grid-tied” inverter Model: GW15KT-DT. Which energy meter would I need to integrate with the inverter??? Thanks in advance 😊

[@waqasrf20]

Hello bro in amazfit gtr 2 in quick toggles there is a bulb/lamp option. What is its function is it to lit up watch face display full screen for about 20 minutes like in gtr 3 pro?? Plz guide me... Have send u pic in your fb page aswell

[@oguzcav]

Hello Roberto. Thank you for the video. I just find your channel. It is very informative for me. I'm planning to invest on PV within a couple of months and I'm researching since many months. I'm guessing our expectations, conditions and choice options a re quite similar. I'm also using many Shelly ies at my home and the house is basically running with Home Assistant with many functions and scripts. My house is fully depend on electric by means of heating, cooking and hot water. We have similar limited options with the power company in my company by means of selling excess energy back to the grid. I'm quite undecided to setup additional contracts and spending time and money and energy for this selling setup. I'm also planning to invest on some battery server racks with the PV system. I dont have option to go on to complete offgrid but the dilemma begins on December s and January s when you begin to consume more the you can produce. I'm interested in more about your excess energy evaluation solutions.

[@Schlimmerfinger]

Hi I would like to know, if there is any other Goodwe compatible smart meter on the market. My problem is, that i do not have enough space in my switch box to install the CT's with the needed distance. Actually i have installed the GW3000 and telling me always that the clambs are in the wrong position. I've read that minimum 5 cm distance between the clambs are needed. Not possible for me. Therefore i want to have a wirerd smart meter without clambs....like a Carlo Gavazzi EM24....Goodwe is not very helpful in that.

[@jehesse]

Great help but I think the graph is confusing. The meter (orange line) goes above zero even when the PV is not producing. The load line (yellow) seems superimposed on the PV line. Cannot be right. My installer tells me the system has been installed correct but i donot believe that >90% of PV power is used! Your comment??

[@hjmalves]

Bom dia. Sabe se este homekit pode ser usado com o inversor hibrido da GoodWe GW8K-ET ?

[@xaviera.m6114]

translated with google translator Hello, I have the same smart meter and it fails me a lot, in summer when the temperature rises it disconnects and the connection and the data are lost and when there is a storm the same thing happens Do you know what it is and how to solve the problem? If I don't touch anything, the system resets after about 14 hours.

[@L8R2YA]

Whats the difference of the smart meter and the homekit ?

[@Frank-bg6mw]

Hi, would appreciate your help. Had a Goodwe MS 10K inverter installed a few days ago. Everything is fine. I have East facing, West facing and North facing (New Zealand) arrays - 20 panels in total (7.7KW). I have the SEMS Portal which shows power produced, but it does not show exported or imported power. This system replaced my Huawei 5K system which only had 2 MPPT, and because of the way the roofs are on my house I wanted a 3 MPPT inverter. The Goodwe was installed and has a sensor across the grid to stop me exporting more than 5KW per hour (as required by the electricity company). The Huawei App that I previously used showed me the import, export and usage. The Huawei came with a DDSU666-H sensor which provided all that info. So what would you advise me to do with regards to getting Export, Import and usage data from my Goodwe Inverter. Do I now purchase a HK1000 ? Do I purchase a Shelly EM, or do I look at Wibeee monitoring. I am going to sell my old Huawei 5K inverter but, I am also curious about the Huawei Sensor that I still have - Can the DDSU666-H be used with the Goodwe MS inverter ? Anyway, please give me your thoughts. cheers.

[@morbidclash]

Could consider reinstalling the Huawei? Can it run 33 percent panel wattage more like most other inverters? The gw10 was overkill for such a low wattage unless you are going to add more panels down the track

[@omgwowgg]

why is my electricity use always double of what I am getting from my solar? no matter if it's on a cloudy or a sunny day, is this a bug or something?

[@jehesse]

Do not trust the data interpretation.. >90% from SP used in the home??!

[@jehesse]

Roberto, your sensorsystemen are not connected corretly. Your graph and data are wrong!!