COMPARING EVERY JOHN DEERE COMPACT TRACTOR FRAME SIZE 🚜

[@GoodWorksTractors]

DOES AN ALUMINUM OR CAST IRON TRANSAXLE MATTER? Are you surprised by those results? Leave a comment below! IF YOU'RE IN THE MARKET FOR A TRACTOR OR ATTACHMENTS, YOU GOTTA CHECK OUT www.goodworkstractors.com 🚜👨‍🌾

[@LTVoyager]

@@brianwideman2342 Not necessarily. Aluminum is very strong for its weight. An aluminum case of the same weight as cast iron will likely be stronger.

[@hphillips7425]

1994 I went to a jd dealership in Somerville Tennessee. I described my property and asked for advice on what tractor the salesman would recommend. His response was when I know what I want come back otherwise I can not help you. I have owned Kubota ever since

[@randalmiddleton8068]

That video was more impressive and detailed than anything I've seen or heard from JD themselves. John Deere should invite you to Florida for there yearly pow wow of compact tractors that the sales reps go to.

[@deerrudy]

You have a great job. Who wouldn't want to work and play with tractors all day long? 👍

[@GoodWorksTractors]

Haha, hard to complain!

[@KirtH27]

i wouldn’t really call it a job unless he gets something stuck

[@conduit242]

I can think of a few but I wouldn’t want to know any of them 😂

[@RockhillfarmYT]

Great job 2038R with the MSL and a Curtis cab fits my needs perfectly

[@GoodWorksTractors]

Thanks for watching!

[@liffy8333]

Most comprehensive comparison I've ever seen in the Deere line. I'm impressed at your knowledge. I will have to watch this over and over to absorb all of this. Thanks again for a very well thought out video.

[@kjg0405]

I bought a 1025R because of your extensive and informative video reviews. Anxiously awaiting delivery in April. Thanks so much for your great videos.

[@GoodWorksTractors]

Very cool, I hope you enjoy it and thanks for following along!

[@marvindiamonjr.9631]

Aluminum versus steel is not so much of a concern for me. Now, the quantity of vulnerable unprotected items on the underside is! So far, I have not damaged anything on my 1025r, but that amazes me considering the hazards I subject it to with every use. I remember you bringing this up in a past video, but I was just wondering if there have been any new developments that have appeared recently. Thanks for all the info!

[@pyroman6000]

That's a concern I never would have thought of, before I started haunting youtube's tractorland. Makes sense, though- a tractor not much bigger than a large lawn tractor could have some issues out in "The bush". Not a lot of ground clearance+ lots of extra stuff underneath= ouch!

[@brianbradshaw1566]

I enjoyed watching the comparisons of all compact tractors & learning about them. I have a 1025R , great little tractor 👍🏻

[@texasviking1]

Very interesting video. I paid a little over 21grand for my 2018 1025r. Packaged deal that came with the backhoe and a very nice trailer. It was brand new.

[@Overdrive1587]

i really wanted to like john deere because my grandpa had a lot of john deere equipment back when i was a kid but the aluminum transaxle just killed it for me thats precious ballast weight thats being thrown away by using aluminum instead and being down low built into the tractor would also help stability as well if it were steel/cast iron i still liked the video though and appreciate all the details

[@n3ocl]

Excellent presentation. Loved how you used multiple cameras. Also very informative. Great Job. ! !

[@belindakt]

So good to see Rosie running the show again! She looks great- the drone footage is awesome, that really shows the differences in these tractors that you obviously know quite well. And- I am really surprised at the aluminum rear ends. I guess they are holding up, or has that turned into an issue yet? Awesome video, thanks!

[@GoodWorksTractors]

Haha, yeah she was telling me it's time to go sit by the fire! No significant issues with those aluminum rear ends. I just found it interesting after seeing all the conversations over the years online.

[@marilynmiller9674]

@@GoodWorksTractors I have a 2017 3038E and have not found any limitations in abilities compared to the R series. Like he said, the R's are simply deluxe versions with more fancy features over an E. Remember: more options mean more money. If you want to do the work without emptying your bank account, an E series will do just fine. Simplicity = less problems. Lastly, I see no practical difference between an aluminum axle and cast iron. Aluminum will be just as durable in normal use, unless you have the need to jump over 12 cars Evel Kneival style.

[@robbower3940]

Nice job very well explained I’m sure a lot of people are appreciative of your knowledge I run a 3720 with all the bells and whistles for my business and it’s awesome Thanks Courtney.

[@GoodWorksTractors]

Great machine, thanks for watching!

[@barelystablefarm7151]

Great video!! A few points worth noting and not mentioned is the independent deck lift option for both the 1025 and 2025R. It’s electric operated actuator for those reading this. I have it, works great. I also think the 2025r loader capacity is slightly more than the 1 series (not huge) as well as 3pt. Thanks for a great vid!

[@GoodWorksTractors]

Thanks for watching. Yes, independent options are available, however they aren't standard. Command Cut is standard on the 2032r/2038r. I was comparing standard setups. Also, lift height and capacity is exactly the same. 3 point lifts more on the 2025r.

[@barelystablefarm7151]

@@GoodWorksTractorsunderstood. You were mentioning cab availability and what not so I didn’t realize that. 754 pounds for 1025R and 840 pounds for 2025r with 120R. Courtney, do a lift test! Nobody has a good one on those 2 to actually test specs.

[@josephsierra7295]

Almost the ultimate JD collection of toys...Enjoyed seeing that, knowing full well I'll never get my hands on 5/7ths of those! Thanks for sharing!

[@allandelusso3912]

Don’t sell yourself short!!! They are almost giving these things away. I just got a 2019. 3025e with a new 60 rotary cutter. It had 76 hrs on it. I told the salesman that I am retired so know job to report. They want a good payment history in your credit. 259.00 a month.

[@expatconn7242]

I screwed up up . I had found 2019 1025 R front end Backhoe With plastic still on the seat 💺 $15.500...Rosie looks healthy. Is there a reason why it’s aluminum instead of steel For cooling or dissipating heat? Steel is the way to go for weight ?

[@lilyt8578]

Another great video Courtney. Very detailed. Like another person here, you also helped in sealing the deal with the information and videos you provided. Very happy with the 1025r. Thx Tim

[@GoodWorksTractors]

Thank you sir!

[@tomripley4212]

I have owned the 2 series, a 3046R, and now a 4066HD. Awesome machine, and the jump in power is impressive.

[@JohnDoe-dk8zz]

I have a 1025R that is almost paid for, i was looking at keeping the 1025R for small job and get another 3 or 4 series. What did make you jump from the 3 series to a 4 series ? Have you ever considered the 5E series ?

[@pyroman6000]

If you want to extend it even further, the small frame 5E's aren't much bigger than the 4R you have there. I was looking at a 5055E, and was surprised at how small it was- like Ford 9N small. Totally different animal, of course- but it would look interesting in that lineup!

[@blackhawkinternationalsecu6962]

And now we know the reason why we have to buy so much ballast. LOL Glad to see Rossie doing well.

[@OrangeismyNewGreen]

Quite the inventory 👍🏻, it would have been cool just to see your new 5 series beside the 4 series to see the size difference, great video 👍🏻

[@GoodWorksTractors]

That about it, but it's bigger than the 5045e-5075e models and didn't want to skip a entire level.

[@OrangeismyNewGreen]

@@GoodWorksTractors I thought maybe you sold it 🥴🙂

[@m1lkman1974]

Great videos! The metal transaxle part was VERY interesting!! Thanks for the videos as I know how much work it is to put them together!!

[@GoodWorksTractors]

Thanks Keith, yes lots of work for sure!

[@robertdaly9036]

Pricing gives us a better sense of perspective of your excellent videos.. 👍👍

[@merrilljohn1619]

Which models are "Subcompact" vs. "Compact" ? Hell of an effort on your part. Did your brother bring the new music ? You deserve all the good that comes your way.

[@GoodWorksTractors]

1025r is the only subcompact.

[@Cameleon_1258]

That was a great video. I didn't even realize that some tractor companies use aluminum.

[@BG-vq9fd]

Nice video I didn't buy a deck for my 2025R but I thought there were different options for deck lift. Rosie is looking really good. I think I have said before that I have a lot of respect for pet owners that take care of their animals even when it's a challenge.

[@GoodWorksTractors]

Correct, but I'm not talking about options. Rather standard setup. You cannot get the 2032r/2038r without the Command Cut which is still a significant upgrade from the basic independent hydraulic deck lift offered on the 1025r/2025r. Rosie's a good pup, she's pretty much fully recovered now too. Have a great weekend!

[@mzerk1021]

Double thumbs up! I'm just starting to look at sub-compact and compact tractors for my property in Northern Lower Michigan. I've probably watched 15-20 of your videos and others. I'm getting comfortable with the 1025R (w/ loader, backhoe, belly mower, brush hog, grapple, snow blower, ballast box, wheel extenders, wheel weights, post hole digger and possibly a back blade or leveler of some type, With these attachments I'm pretty sure I'll need 3rd function hydraulics on front and rear) A great education! We have 40 acres with an apple orchard - 50% is hayed (by relatives with their equipment), 30% woods and 20% is apple orchard and homestead (future house/garden - currently barn/driveway/parking/burn pile etc.). Now I just have to break the news on level of investment to my wife! :)

[@rp1645]

Love your puppy baby Dog. What a big baby. Just asking the JDs, look different on their front bucket attachment hook up. Is that their design and does it make it harder to attach different brands of bucket, say a university front bucket. It looks so, so different?????? Just asking. You do such outstanding work at explaining the difference, thank you so much, I learned a lot about small farm tractors.

[@hughhead9079]

The best one stop shop Deere comparison I've ever seen online... Nice job guys! My 2025R is sweet and nearly new, but somehow I can't bring myself to buy 4' implements... I'm lusting at that 3520 OR more likely for a well loved low hour 3039R a bit higher in the $20s (along with TTWT I hear)... Wondering if I can get R14 or R3 radials that make the width a bit under 60" through my 60" gates on it? Sad to say gates are the decision criteria. It could be an M-1 Abrams tank capability-wise, but if it can't work where it's needed, doesn't work right?

[@stephaniecalvo2638]

You missed one, the John Deere Lawn Tractor x739 All wheel drive 4-Wheel steer... with a Front Little Bull Loader👍

[@bryanh4126]

Where would a 2320 fit in the line up. Also have you seen any three point attached buckets? Maybe with a hydraulic top link to tilt/dump. Even with a loader type quick attach for other equipment (forks). I’ve seen some online. Mostly from other countries or buried in hard to find website. Titan has one but you can’t back into a pile of material to load it. Looking for a more inexpensive option to buying a complete loader just to be able to move things around. Love the channel. Thanks

[@roybrochu5409]

Great information. Confusing at times, but well worth watching.

[@tracksoneverything4085]

I have a 2015 1025r with backhoe and loader and over 300 acres in northern Ontario. Now I'm really wishing I held off to find a 2025r or 2032r for the bigger tires and more ground clearance. Do you know if my backhoe fit on a newer 2025r? I was under the impression that they were different. Would love that 4105 but need to barge to get to my property.

[@GoodWorksTractors]

I don't think your backhoe will fit the 2025r, but I could be wrong. The new style 260b is what's found on the 1025r and 2025r, but I'm not sure if your 260 backhoe will fit. Might need to ask that JD service counter and they can look up in their system.

[@tracksoneverything4085]

Thanks for replying so quick. That's what I thought too. Guess I'll be looking for an older one or just a bigger tractor next time lol 1025r gets the job done I just have to be careful with the ground clearance and stability. Thank you for making these videos I always enjoy watching them and get lots of useful information, helped me out a lot pulled the trigger on a Hla snow pusher this year and I love it. Just can't seem to find a backdrag poly edge anywhere near me.

[@comm4tom]

I have a JD 4115 with 227 hours…bought it about 20 years ago. What would be the equivalent to today’s compact tractor? thanks, Tom

[@jamesberg3106]

Corey, I have an independent deck lift on my 1025r. It is an option that I had installed by the dealer. I had a 2720 with other setup. I kept damaging the linkage when the deck was off. So I ended up leaving the linkage on the deck and removed the linkage and deck as one unit. Defeated any quick disconnect but I was no longer spending significant coin on replacement parts.

[@GoodWorksTractors]

Correct, but I'm not talking about options. Rather standard setup. You cannot get the 2032r/2038r without the Command Cut which is still a significant upgrade from the basic independent hydraulic deck lift offered on the 1025r/2025r. Thanks for watching!

[@henrycarlson7514]

Thank You . to see them lined up like that is impressive also to comare them is impressive. Honest information is so valuable . of course which one to buy is a personal choice . Not just the tractor but every thing else to think about

[@Outdoors_with_kg4muk_Wayne]

I’m still trying to decide what tractor too get I need the mower but I need a strong loader and back hoe for landscaping jobs one question can you get the 1025 gear drive with shuttle shift F & Reverse , I have not seen one on the lots I been to.

[@patrickcorbett8361]

I watched the video and it was very interesting and informative, Thank You! I want to purchase tie down brackets for my 2016 3033R but having trouble sorting some out.... Can you help ? T.I.A. pc

[@angus4202]

aluminum disperses heat better than cast iron and really has little difference in weight capacity of cast iron

[@mikeholubek4419]

Suggestion, Kubota comparison? Good Job on this video and comparisons. Hi Rosie!!!

[@GoodWorksTractors]

Yeah I doubt I'll ever have all the Kubota sizes in stock at the same time. Never know though!

[@treylem3]

I have a 2305, w/347 hrs...loader and belly mower, great condition. How would it stack up to the 1025? Any tips? Thanks. Another great video, as always.

[@67L48]

Great video. 6:08. I think you might have sold that to my brother out in Iowa.

[@acdii]

Nice comparison. Would like to see a competitor comparison, Kubota vs Deere vs ? as far as which model is a direct compare to which model. What does an L4060 compare to? Certainly not the 3 series from all the specs other than HP. More importantly Cost to Value. I know right from the start the JD costs more than Kubota, but why?

[@joshdively8029]

Wow you have more inventory than all the dealers in my town do

[@GoodWorksTractors]

Yeah, been hard to get and keep inventory for the last year or so.

[@mikebreazeale2563]

Great video again... I just wanted to add that my 1025r with a mauser cab is a joy...the mower deck is a pain in the butt. I think anyway. I can't leave the loader on with the mower deck. My mower deck is run with one of the hydraulic hoses from the loader...wish I could change that. Maybe you have an idea...?? Thanks for sharing...I hope that makes sense...

[@comm4tom]

I have a JD 4115 with about 225 hours I bought about 2003. How would that lineup with these models in the video? Thanks

[@GoodWorksTractors]

It's a small compact, fairly similar to a 1025r or 2025r.

[@rcwayt4020]

What tractor would you recommend for lifting round bales? Roughly 1000lbs

[@zachwiz4709]

Man! As soon as I leave Michigan the weather got good!😕 I am on vacation because why not!😂

[@toddpac1]

I understand your connection to your machine

[@GoodWorksTractors]

Thanks for watching! :)

[@lecompteman5810]

Nice video. Appreciate it. Your music has been on point. I’ve used Epidemic sound for some of my videos and really liked their website. Thanks for putting this all together for us. I still hope to buy something from you someday to say thanks.

[@GoodWorksTractors]

Thank you sir!

[@TelescopeJunky]

Very nice video.good sir! Neat to see the differences between all the models. Very helpful for those going for a used JD! So much good info in one place. Oh and go Rosie! 😃

[@StartBuildingYourDreams]

Wow! Great lineup and lots of great details!

[@beetlefang]

Is this Really GWT? No snow? No stuck Gator? Seriously, nice video. Are you planning an orange one? PS I enjoy the Rosie cameos.

[@GoodWorksTractors]

Ha! Spring fever for the last week or so around here!

[@ronthomas7892]

Thank you, Amazing how they hold there value.

[@thehobbytimefarm4049]

I Have a 4066r on order ,can you tell me how wide is it with the wheel spacers installed ?

[@pepperellbees]

I watched a bunch of your videos. Really informative, thank you! This video has only Russian subtitles I was wondering if you could put English subtitles on it for me. I would appreciate it thank you!

[@GoodWorksTractors]

Not sure how we got any subtitles on there, will look into it. Thanks!

[@pepperellbees]

@@GoodWorksTractors All the closed captioning on all your other videos work just fine. KZbin gets a little glitchy with their closed captioning sometimes. Thanks again and thanks for all the tractor info!

[@sureshchili]

I own a 3046R and I have a air seat and a belly mower. I am not sure why your saying that the 3 series doesn’t come with them.

[@corbysherman4710]

I paid $16,500 with an FEL, 60D quick attach deck,and a 54” quick hitch snowblower. It has 80 hours. Bought it from a guy that lives 5 minutes from and we both use the same dealer. I called the dealer. They know the owner and me since I have my zero turns serviced. They gave me a clean bill of health and regularly maintained every year. Did I get an ok deal?

[@backpackingWY]

So which ones can lift round bales of hay?

[@bradshook2611]

Factory cab with A/C & heat on 2020 1025r...like Mauser cab?

[@GoodWorksTractors]

That has heat only, no A/C.

[@GoodWorksTractors]

Also, in my opinion, real factory cabs can't be installed after they leave the factory. You can install a Mauser cab on a used 1025r that is bought off Craigslist. You can't ad a ComfortGard OEM cab after the fact to a 3r or 4r tractor. Just my take on it.

[@ralphjelomono9068]

great review. Very helpful

[@GoodWorksTractors]

Glad it was helpful!

[@claytonpulley4947]

GWT, great video, very educational. thanks!

[@isleseayou]

What is the largest model that a factory cab + backhoe can be ?

[@KirtH27]

How does the pwr reverser transmission work?

[@remingtonwells5638]

I am just curious, the one on the far left has about 60 some horsepower, and is considered a sub-compact tractor. Yet, I have a 5045E and it’s considered a utility tractor, please explain how that works.

[@SummertymeJamz]

I always love these videos - you are my go-to person for this type of information

[@GoodWorksTractors]

I appreciate it!

[@estrellametal1]

They have a belly mower for the 3 series now

[@prairiecreekfarm922]

Will a 1025r with a cab go in a 7 foot tall door?

[@GoodWorksTractors]

Just barely

[@morganthedeereman1340]

Can you put a front pto on the 3039r

[@Bob-vb8lc]

WOW, that was an amazing video. I have the 1025R now, but after your video, I might be looking to trade up to a 3 series (Not an E ). Thank you Courtney.

[@GoodWorksTractors]

Haha, thanks Bob!

[@marilynmiller9674]

You're not doing yourself any favors by not considering the E. My 3038E has performed flawlessly for 5 years and has done everything I wanted it to do. And the $10K price difference has allowed me to buy the attachments a tractor needs to make life easier. A Chevy will do everything a Cadillac can do.

[@danielhelpingstine3202]

Have you ever done a video on1023 John Deere

[@briannelson2818]

Does a magnet stick to cast iron?

[@GoodWorksTractors]

Yes

[@ritterjon]

💥 Aluminum and green plastic huh 🤔 nothing against Deere but I would expect better. I think with enough KZbin brain power we could build the perfect tractor. *Keep on tractoring!* 👍

[@chex313]

Whatever that plastic is on my 9 year old 1026R , its nice, no fade and logs bounce off it without denting. I would have dents all over metal.

[@feldhdleh]

@@chex313 I agree. The plastic is actually an upgrade over the metal used by the other vendors. It's a matter of taste too I realize, but in practice that is the reality. It's an improvement, not a cost reduction outcome for the customer.

[@jaybartgis5148]

Why is a john deere ride on mower like $2300 but av basic 1025r is like like the price of a used Ford F150? And also. What can a $18k 1025r do that a used pickup truck can't?

[@gardnermiller6820]

Great review!

[@cantbuyrespect]

will 2025r tires/wheels fit on a 1025r?

[@GoodWorksTractors]

I don't think so

[@cantbuyrespect]

@@GoodWorksTractors thanks for the reply

[@MyHMMWVaddiction]

I always thought if the rear end is green it's a steel rear.

[@Lets-do-this-]

Thanks that was great

[@jimg8218]

What about john Deere garden tractor series review

[@GoodWorksTractors]

I rarely carry garden tractors anymore.

[@romainm3378]

Génial les vidéo mais avec les sous titré en français ça serait mieux 😉

[@clutch747]

wow! thank u!

[@billashley1389]

Thanks great video.

[@jeffreyanderson4993]

Love your channel, Look forward to your videos. Music volume is a little much the last few weeks. Just my opinion, and we know what they say about opinions... would love to see more orange on your channel, understand you film with the inventory you have. one of the best Tractor channels out there.

[@79lynch]

why does the quick attach arms very uneven when loader is off

[@GoodWorksTractors]

Not sure

[@kubotaoz6108]

Great video. You are very knowledgeable about these compact tractors. But as you know I’m going to add a little bit to your comparison. John Deere does not make their compact tractor line. They are built by Yanmar in Japan . Yanmar also builds their own tractor line If you ever have a chance to operate a Yanmar tractor, I prefer the Yanmar tractor over the John Deere. Why Deere did not go with a 3 range transmission I will never know. I run Kubota and they have 3 range transmissions, low, medium, high. After owning a tractor with a 3 range transmission I would never ever look at a tractor with a 2 range transmission. Kubota is the only tractor company in the world that builds and engineers their tractors in house. Frame,axles, and transmissions.A John Deere compact tractor is a tractor that is assembled from parts and pieces from Other manufactures. This is why quality control suffers with John Deere, and why things don’t always work right. Be careful and stay safe 😀

[@GoodWorksTractors]

Perhaps Yanmar used to build certain John Deere models at one point in time, but they don't do so now. If you disagree, then please provide links substantiating that claim. Unless TTWT spent millions of dollars fabricating a movie set in Georgia, then it sure looks like John Deere is building John Deere tractors with parts sourced all over as with any equipment manufacturer. kzbin.info/www/bejne/jmbMipmpg8iZqZo kzbin.info/www/bejne/n2aom6KPgM14m6c Kubota outsources many, many, many parts as does every major machine/heavy equipment/auto/aircraft manufacturer in the world. For many reasons, it's impractical to produce every part themselves. For what it's worth, you're trying to knock John Deere for having their tractors built in Japan while the Kubota Corporation is headquartered in Japan. So, please quit spreading misinformation as it it misleads those who don't know better.

[@kendrury3713]

Thanks Corey for educating kubota oz! Glad Rosie is doing better!!

[@stevek4449]

Good video. Judging by the telephone pole shadow migrating across the background like start vs 7:35 mark, i imagine it took a few hours. Thank you for the time😀. I sent this post to Tractor time with Tim after i was curious on a system concept i was thinking about when looking at hydraulic multipliers. I am curious as to what your take on this concept would be pros or cons. Here it is...perhaps a video reply??🤪 Curious. I like this multiplier concept. However, just to play with concepts...just to play. In the push for electric vehicles, as well as hydraulic fluid issues like leaks and injuries from pressure or exposure to skin etc. If the hydraulic system, like rear remotes, would there be more power via electric motors if tractor had an electric generator sending electricity to power implement instead of fluid pressure? It could be easier to regulate. So say one remote is positive and other is negative vs send and receive fluid circuts. Aside from swapping implements or converting them, what do you think the pros and cons of an electric system replacing the hydraulic fluid system? Would it be better or worse? Again not cost of converting or replacing implements. Say a first time buyer just starting out with no previous equipment in hand. Just as a system, traditional hydraulic vs replacing as an all electric based system. Curious on take. Would like to see your take on this.

[@mikeadler434]

Awesome video!, thank you.

[@tonygreen1067]

Not my color, but good info anyway.

[@GoodWorksTractors]

Thanks for watching!

[@davidr3246]

Ironic considering your mane 😂

[@EOTG_AK]

Rip Rosie girl 😭

[@toniataylor-ward3600]

JOHN DEERE MAYBE THEY CAN PARTNER WITH DISNEY TOO. PUT DISNEY CHARACTERS ON THEIR WORLD FAMOUS JOHN DEERE GREEN TRACTORS AND ATV'S. WHAT A WONDERFUL WAY TO CREATE MEMORABILIA THAT WILL LAST CENTURIES TRIED AND TRUE. BECAUSE WE CAN. OH MICKEY YOU'RE SO FINE YOU BLOW OUR MINDS HEY MICKEY... M-I-C- SEE YOU REAL SOON K-E-Y- WHY BECAUSE WE LOVE YOU!!! MOUSE...🍾🥂

[@robywatts1360]

You mentioned the 3E and 3R where does the 3D fit in?

[@sryth1]

How is it remotely economical for JD to maintain all these designs? They are so close to each other, does the level of granularity really offer any value? It just makes things confusing for buyers, probably costs an arm and a leg for R&D and marketing, and the customer ends up paying for this.

[@markschmaus5580]

➡️👴🚜

[@GoodWorksTractors]

Morning Mark!

[@markschmaus5580]

@@GoodWorksTractors Good Morning !!

[@jacobm.6904]

“Please click the like button and RIGHT next to it is the subscribe button” *clicks dislike*

[@GoodWorksTractors]

Ha!

[@Ouflala]

I see that.you ask for money for World Vision organisation. Do you know that they are more on the "here is a bible for you and your family" than "here is how you can build a long lasting water well for your village" side?

[@GoodWorksTractors]

They do both and that's a good thing.