FINALLY A CHEAP 3RD FUNCTION DIVERTER KIT FOR A TRACTOR! 🚜

WANT TO SUPPORT GOOD WORKS TRACTORS? CHECK OUT THE LINKS BELOW!
We've been sent a Hydraulic Diverter Kit for our 1025R from Summit Hydraulics, and we're so excited about it and couldn't wait to install it to make our first video on it. So if you're looking for an overview and introduction into hydraulic diverters and multipliers (we were also sent one of these), watch this video! You'll give you subcompact or compact tractor the ability to use three function implements like plows, snowblowers, or claws!
5% OFF SELECT PRODUCTS WITH CODE GWT AT SUMMIT HYDRAULICS! summit-hydraul...
TRACTOR DIVERTER KITS & HYDRAULIC MULTIPLIERS: summit-hydraul...
___
Buy Hydraulic Kits! summit-hydraul...
BUY One Large 7" x 12" Mirror! amzn.to/2Uit8ox
BUY One Large 7" x 12" Mirror w/Bracket! amzn.to/2yMGvpV
BUY Two Large 7" x 12" Mirrors w/Brackets! amzn.to/2wZCQUF
John Deere 1025r/New Style 2025r Seat Cover: amzn.to/2OyxBkY
BUY A GREEN BALLAST BOX HERE! www.anrdoezrs....
Watch this video to convert your tractor lights to LED! • CHEAP LED LIGHT UPGRAD...
SHOP: www.goodworkstr...
AMAZON: www.amazon.com/...
SUBSCRIBE: / goodworkstractors
LIKE: / goodworkstrac. .
FOLLOW: / goodworkstra. .
5% OFF WITH CODE GWT AT LUBE SHUTTLE! www.lube-shuttl...
5% OFF WITH CODE GWT AT HEAVY HITCH! www.heavyhitch.com
5% OFF WITH CODE GWT AT MILLER TIRE! www.millertire.com
5% OFF WITH CODE GWT AT MUDD'S CUSTOMS! www.muddscustom...
5% OFF WITH CODE GWT AT BIG TOOL RACK! http:www.bigtoolrack.com
5% OFF WITH CODE GWT ON PROTERO DUMP SYSTEMS! .www.proteroinc.com
5% OFF WITH CODE GWT AT SUMMIT HYDRAULICS! www.summit-hydr...
5% OFF WITH CODE GWT ON SWEEP-ALL SWEEPERS! www.sweep-all.com
5% OFF AT RHINOHIDE CANOPIES! www.rhinohideca... Complete survey after purchase, mention GWT, get 5% refunded.
*Discount codes cannot be combined with any other promotions, offers, or deals!
**I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support!
This video is for entertainment purposes only. Good Works Tractors (Good Works Lawn & Power, LLC) cannot be held responsible for content found in any video. Always reference your owners manuals, use extreme caution, and proceed at your own risk.

[@brianwalters480]

how much does this kit cost? (Hydraulic Diverter Kit for our 1025R)

[@VNV67]

Finally a person that know what he is talking about and takes time to explain it... Very helpful and I thank you for this video.

[@paulgreen4809]

I watch this video I'm still confused can you help me want to know if you're getting the kids from summit racing or are you actually getting the kids from he's talking about that this is the 1025r John Deere if you can help me thanks

[@LongBinh70]

"Hydraulic back drag" for a rear snowblower? I'm intrigued. More info, please!

[@GoodWorksTractors]

Hopefully soon!

[@rcguymike]

What @LongBinh said! 😁

[@Classifiedreality]

Best tractor owner channel. Still raving about my electric grapple...😎

[@GoodWorksTractors]

Thank you sir, glad you're enjoying it!

[@lukehansen9185]

If you ever ran a hydraulic grapple you would be really disappointed in the electric one

[@Classifiedreality]

@@lukehansen9185 oh I have ran a hydraulic grapple, so single jaw and dual. And yes they do a great job. For my work on my retirement farm, electric does the trick quite well. Depends on application. My .02.😎

[@aaronkaus7423]

I can't find your video for install of hydraulic multiplier on your 4066r. Can you help me out? Wanting to install on same tractor. Thanks

[@GoodWorksTractors]

Hi, no install video really, but discussed a bit here. kzbin.info/www/bejne/h2SqemyDZa5nq9U

[@rbhillner]

I can't wait to see this multi function installed and in use ! Things are a lot more complicated and technical than my grandfathers' 1950 Ferguson that had that new " fangled " three point hitch system. A huge step up from the horses .

[@GoodWorksTractors]

They've come a long ways!

[@CousinVinny302]

I don’t know why anyone would thumbs down this video. GWT always has the end user in mind providing great products and information. Great Channel!

[@dwayneloftice2326]

The new, cost-effective options just keep on coming! My head is spinning!!!!😀

[@GoodWorksTractors]

Haha, I was always told to stare at the horizon when I got dizzy :)

[@kylerayk]

Love your new logo, Courtney! Kinda looks old-timey!

[@GoodWorksTractors]

Haha, thanks!

[@garyfunk1346]

- I what to use this diverter valve for a future grappler- when the grappler opens up and closes, is it just one speed or can you control the speed somehow at which the grappler jaws are opening and closing

[@smitty2jones]

I added one a diverter and grapple to my BX last spring! Best addition I've made! I had to mount the valve on the outside of the loader, there wasn't room inside. It's still within the track of the rear wheels, so it's not like it sticks out. I used 90° on the outside ports to keep it skinny, too!

[@GoodWorksTractors]

Awesome, how was the DIY install? Think most owners could figure it out?

[@smitty2jones]

@@GoodWorksTractors It wasn't bad at all. I pieced mine together instead of buying a kit, but once I had all the pieces and made a couple of brackets, it went really smooth. On my BX2230, the loader valve is on the loader itself, so I think that made it simpler also. The only additional connection (when removing/installing the loader) is the electrical connector from the fuse block to the switch/solenoid. I'm not much good with this youtubes stuff, but I uploaded a short video of me sounding like a goofball and showing my install if you want to check it out!

[@bradmeacham6982]

Excellent info! The multiplier is an excellent solution to getting a serious quantity of SCV circuits for controlling hydraulic cylinders on 3PH attachments. Not only can you go from one to 6 circuits in your example -of which only one needs to be adjusted at a time- it is, by far, cheaper than any factory solution. It is also far easier to install than factory SCVs since they need someplace for each SCV valve, a way to position their control sticks in the operators station, and a way to rout their hydraulics to the back of the tractor.

[@johnjaco5544]

Please tell me it's not made in china

[@PoisonShot20]

How much this kit cost today? I'm buying a used 2019 1025R and doesn't have this function installed. I dont want to have to sale the tractor to pay the JD dealer to install it!🤣

[@rcclassiccrawlers4368]

Are all those plugs and connections waterproof?

[@TimeAfterTym]

This is really very interesting. I hope that the instructions are comprehensible and, hence, easy to follow.

[@letsgoblue37]

Is there a single connect hydraulic kit for using loader/mower on 1023e tractors? I have a leaking connection where I switch out from loader to mower. Yellow connector

[@justadbeer]

I had Kubota add a 3rd function valve to my new 2650 before I picked it up. Just for comparison, the cost was $800 installed. This kit would save you about $250. Although not quite half the cost, and you do have to install it, I would think it would be pretty simple for someone that is a car guy or has some mechanical knowledge

[@GoodWorksTractors]

This is a example of the cost of adding an option when you buy the tractor new vs doing something after you already own the tractor. I tell folks all the time to add these types of options when buying new as you'll save lots of money vs adding on down the road. Your example just proves that point further. Also, that's about the cheapest I've ever heard of any dealer adding on an additional function regardless of Kubota or JD. Thanks for sharing, good stuff!

[@lh98]

Good Works Tractors yeah the price around here is 1500 for installed 3rd. I have a 1533 mahindra I want to add function for a grapple but am unsure if I could use the rear lines I have when backhoe is off but those lines have no control lever (controls are on the backhoe). or maybe I should go with diverter ?

[@wiskybilt9399]

If you are promoting this kit. Please let your watchers know what the kit is. It seems you showed all the pieces without listing the kit

[@digger0429]

Want to buy third valve function on john deere 4200 ,420 loader can you help

[@USCGCoasttoast]

When you do show how to put one on can you do it on a L3901?Pleaseeeeeeeeeeeeeeeeee

[@stevenbenavente1229]

I need a cab & A/C on my 4620, it's hot as he'll in Florida.

[@MattN03]

Courtney, have you made an installation video for this kit? I have a B3200 I'm considering this for.

[@GoodWorksTractors]

Yes sir, did a video soon after this one.

[@pow_pow.]

Can the diverter be used on a 1025r with a Curtis cab?

[@sheldonlackey8391]

Do you have a kit for a 545d Ford industrial tractor

[@jeffneisen7553]

I just installed the 3 port multiplier from Summit on my 2520 to control the chute rotation and deflection for a rear mount snowblower. The valve diverts the curl loader function to the rear couplings. The hardest part of the install is routing the four hydraulic hoses from the bottom of the tractor to the rear. I mounted the valve to the right side roll bar, so it is at a nice height for coupling and uncoupling. The kit comes with everything needed for the install. The guys from Summit are great to work with and I would highly recommend purchasing one of their kits.

[@jeffneisen7553]

The kit comes with a cigarette lighter plug to power the solenoids, however there is no “Off” position on the switch so one of the solenoids will always have power and will drain the battery if left plugged in. I ditched the plug and installed a relay under the dash with the coil connected to the ignition switch, one side of the relay is connected directly to the battery, and the other side to the solenoid.

[@Itsa_Mea]

I guess I was 2 weeks early to take advantage of your discount code. I ordered a Kubota True 3rd Function kit and adapted it to fit my FORD NH 1520. Excellent quality and works flawless. Now I want to add a rear diverter kit for Hydraulic Top link and maybe angle. I went with this kit for my new dual ram grapple.

[@GoodWorksTractors]

Nice, glad to hear it's working well for you!

[@troyduprey5336]

Where’s the installation video?

[@mr.redneck2715]

Very nice butt it won’t work for attachments not hooked to loader, such as snow blowers. Maybe it cud be hooked under the tractor.

[@GoodWorksTractors]

You could get different hoses and reroute to the back with a quick disconnect back there. So, then you could plug into something on the backside if needed. Or, slap a quick connect on another set of hoses from the back going to the front if you want to run something like a grapple.

[@BlackDevill9]

Hey there do you have a kit that fits a 2004 jd 4120 thanks

[@belindakt]

LoL, that bug looks like me movin along as best I can, haha. Now we're talking about affordable add on hydraulics. From what I see on your table, that looks pretty good!

[@GoodWorksTractors]

Haha, I think he found it a little on the chillier than what he was hoping for :)

[@7894mantas]

Hello maybe you can help me with this how conect?

[@cullenpodolan6626]

nice little guy there haha i think he wonted to have a john deere

[@GoodWorksTractors]

Haha, turns out he was just a window shopper...hanging around after closing time :)

[@cullenpodolan6626]

@@GoodWorksTractors hhahaha

[@lutherprince9304]

Very useful information! Thanks for sharing!

[@GoodWorksTractors]

Glad you enjoyed it!

[@KevinNguyen79]

I can't find the John Deere kits on the site. I'm sure the universal ones would work, but the don't include hoses. Kubota has its own section.

[@deanmeyer1815]

I purchased the Summit diverter kit for our Deere 4105 to run a brush grapple. Looking forward to installing it soon. Instructions are very detailed and specific to tractor to be used on. This model does not have rear remotes and we are researching ways to mount one soon. I will be checking with Summit to see if they have a solution. Thanks for the videos, we are looking at more accessories for it.

[@GoodWorksTractors]

Hope you enjoy it!

[@deanmeyer1815]

@@GoodWorksTractors Sorry, we looked at several different brands and and went with Artillion. Got the names mixed up. 😏

[@motohobo8826]

Will this work for a 990jd

[@davidparadis490]

Does a dealer installed 3rd function work as a diverter valve or are you able to do 2 functions simultaneously such as raise the bucket and clamp the grapple down at the same time?

[@GoodWorksTractors]

Good question. That will totally depend on the tractor, the dealer, and what's requested. Every tractor will be setup differently, have different hydraulic capacities, and many times dealers and/or customers will mistake one for the other.

[@TelescopeJunky]

David I installed an OEM 3rd function from my manufacturer, TYM, and it is a diverter. You cannot do 2 functions simultaneously. Like Courtney said though that does not mean other manufacturers use diverters for OEM 3rd function kits.

[@stephenseiwert9672]

Thanks for another great informative video. I have the Summit Diverter valve kit installed on my John Deere 2038r and I love it. I use it to operate my grapple I had my John Deere dealer install it when they installed the 2 optional SCVs on the rear of my tractor. I really like the "fighter jet" style joy stick handle with the trigger in lieu of a thumb switch. Makes it effortless to toggle between the the dump and curl and the open and close functions.

[@GoodWorksTractors]

Right on, that's good info. Thanks for sharing!

[@mattriley6866]

@@GoodWorksTractors Hey I’m getting all the parts I need to hook up a front plow. I have a 2320 JD, I was wondering if you might have the part numbers from summit for the 3rd function kit with the joystick handle? This is all kinda new to me. Thx. Hopefully you get this. Again kinda new at this cell phone stuff🤯

[@shawnc9557]

Thank you, sir, outstanding video and outstanding presentation, crystal clear understanding now of how a diverter valve works. Subscribed. Will check out all your other videos. God bless you.

[@mrmichaeltscott]

Violation of the JD equipment agreement. That quick hitch is supposed to be JD Green. 🤣🤣

[@WichhartAcres]

I wonder if they have a solution for a Kubota bx23s!

[@warped2875]

1025R kit available on back-order... 😖 :-/ ...and I kept waiting for the stink bug to meet his maker, no joy. I hate those things!

[@michaelcookeiii4552]

Just had my fixed I have a false VALVe I think JD charged maybe 7 or 800. Valve got stuck THEY took it apart cleaned. Works great was supposed to BE under watt

[@stump-bossBIll]

Man, were you reading my mind? I've been on phone just this morning with Summit Hydraulics and Artilian today trying to figure out what the best DIY option is for my JD3320.....Perfect Timing! He (Mark at Summit) told me at Summit that the hoses are separate because the system is universal and they have no way to know what length hoses need to be?

[@dwaynef17046]

Would the 1025r H120 kit work for the 2025r H130? I can't see why it wouldn't. I would just prefer to get this kit, with hoses included, rather than a universal kit for all tractors

[@gwolf7716]

Well, I bought the Summit front third function kit for my 2038R with Titan 48” grapple. Literally, worthless installation instructions and no mounting hardware (drilling required but I can’t decide where that would be out of the way and still protected). What they sent me was completely different from your video. It was $450, probably should have gone with the more recommended WR Long system. I’ll be several hundred more in once I buy all of the correct fittings and hoses to make this work. Pretty much gave up for now.

[@josephsierra7295]

That multiplier is cool. Wher would you tie that in on a 1025r tlb? at the Power Beyond ports? Nice stink bug..LOL!

[@oby-1607]

Looks pretty amazing to me. Anything that helps hydraulics is always welcome.

[@chevydmax1000]

Did the hoses come with your kit? The kits at Summit don't show hoses? Also it does not look like they have kits specific for the John Deere tractors. I have a 2032R. Thanks for your help, Great VIdeos!

[@jeffwhitteberry5725]

Any chance you could give a link to the exact diverter in this video for a 1023?

[@GoodWorksTractors]

I'm not familiar enough yet with their website to give this recommendation. Might be best to send them an email to confirm for sure. www.summit-hydraulics.com

[@jeffwhitteberry5725]

@@GoodWorksTractors Thanks, Keep up the good work

[@daviddenman7479]

I’m picking up my new tractor next week. Hurry up with that install video. Chop chop🤪.....

[@mkd03515]

I was looking through your videos to see if you did one on a diverter kit for the 3 point/ mower deck hydraulic system.. unable to find anything.. recommendations?

[@chex313]

I'll add this, it is a challenging install (Summit Diverter) if you also have a Single Point...It will not fit on the Mast like they intend. I am adding a bracket to get mine out away from the SP. I would not want to put it on the outside of the mast. FYI The lines tho are plenty long to place it where it fits, and I knew it would be tight when I ordered it.

[@jgriff3218]

Were is the joystick mounted on the 1025R?. Would like to add to mine.

[@jimpetersen8900]

If I was to buy a 1025r from you would you install the third function?

[@johns17m]

Is the first valve that you showed something that, if mounting the valve somewhere other than on the loader, you could use this to potentially run a hydraulic actuator for a front mounted snowblower chute deflector?

[@byronmorrow9103]

Has anyone put one on a Kioti yet. Buying a cs2220. And they say no option for factory 3rd.

[@edstevens9357]

Thanks for the great stuff you bring here

[@GoodWorksTractors]

Thanks Ed, glad you like it!

[@nathancisneros6585]

I have a JD 3032E what would be the best third function kit to use

[@stanleylasiter5606]

A video showing the installation of a 3rd function valve for a grapple on a L3901 that already has rear remotes installed would be great. I want add a grapple to the FEL for a grapple. I am using the rear remotes for a Lane Shark.

[@gregbakke8296]

Awesome videos! I hope you will keep posting these, I've learned a lot. Knowledge is power and safety. Thank you.

[@teamjusticerc9860]

I know it is not your wheelhouse but If you get you hands on a bobcat CT I would love to know your opinion.

[@s1283]

Super find. Definitely on my future purchase list for when I get home from deployment in 2022, for now though I’ve got my sights on the brush crusher first. Making the most use out of what I currently am set up for. But I’m sure if after a Brush crusher, I put on a diverter system, I’ll be able to sell a used brush crusher and have a good chunk for a hydraulic grapple... but is it worth the loss of capability with a 1025r? The loader is already limited on lift capacity

[@sgtaaronp]

I wish I knew gwt before I bought my tractor!!! I'm only across the state!

[@jjw2909]

Summit Hydraulic is a great company to work with.

[@ryanoneill8059]

Are the small black clamps metal or plastic. If metal then it's great.

[@sunseeker5071]

What a great resource....... Kevin. Lansing MI

[@kengoldbeck6363]

what do you think of the summit 3d function diverter kit now that you have had it for a while?

[@urbanawoodproject3123]

I believe that is an assassin bug. Watch yourself.

[@emftestblock]

Could that diverter block be connected to the power beyond?

[@troyelliott9465]

Where did you get your John Deere, NEON SIGN !!!!! Gotta have one ! Love It.

[@brandonbecker8385]

Wt does it look like 2019 Kubota bx1880

[@batesfusion]

Got this kit installed on a 2038r with minimal mods.

[@mattmiller478]

Really cool, but I assume it may impact a warranty?

[@toddsmith3002]

I use a Faster 6 block ( 3 SVC points) for my 1025R great when switching form Loader to Snow Blower. I am just starting to look into a grapple so this is perfect timing. can not wait for the install video on the 1025 diverter.

[@stu195111]

-Very Good Info! What kind of bug was that?

[@vinsonhelton7141]

I appreciate all your 1025r videos, you do a very good job. I would definitely recommend your videos and your business to others.

[@DeereGuy211]

That is very cool. Had a customer that seen your video and asked me about it this afternoon. Thanks for showing some cost effective options.

[@ScotWalt858]

All Good! Thanks

[@GoodWorksTractors]

Thank you sir!

[@bvinduck]

will this work on a 2038R?

[@wayahedia9989]

That's the one I've had in my shopping cart for a while..!

[@josephcraft2845]

Sweet

[@ddacombe4752]

awesome! i like the look of the multiplier, it may be a great way to add a hydraulic top link to my 2038r as i already have one scv with the power beyond for the backhoe.

[@jamesyates5191]

Can’t wait to see the next video. I’m looking to add two zones for the rear for top and tilt (dealer quote with cylinders $3000) and front third function for grapple.

[@kevinbrewer2141]

I've seen deserters for the front but for the back that is very cool. It opens up the options instead of wasting the remote and lines that are already there.

[@mrwilson4909]

think it would possible to rig the actual trigger mechanism [ not the handle] on the 4-way handle of the 1025r? would seem difficult to operate electric solenoid trigger handle and 4-way hydraulic remote at the same time.

[@GoodWorksTractors]

The solenoid trigger handle replaces the handle on your joystick

[@mr.fringeminority5426]

Thanks for the info on the summit products. I've been looking into summit to increase my own functionality, and this is a great start to covering their products. I'm looking into the EH valve blocks, rather than a diverter/multiplier kit, as having these functions on a dedicated circuit seems safer, and more productive. The only issue I have with the EH valve blocks is that they don't appear to have any proportional controls on offer at the moment. Using the diverter/multiplier would allow that by utilizing the proportional control already installed on the tractor (joystick). It's a toss up.. The price range is similar, but the pros and cons of the actual hardware make it hard to decide. For any that don't know what I mean by 'proportional' - I mean that you can control the speed of the hydraulic circuit.

[@twlyons1]

✨🌟🎄🌟✨

[@TelescopeJunky]

You will have no issues Master C, very easy installs and I am happy you are showing these as many do not know about them! 🙂

[@greggvons6494]

Summit is awful to deal with. They continually lied regarding availability for their kits and continued to push fulfillment out week after week. Their solution may be cheaper but I found them to be dishonest and awful to deal with.

[@steelgy]

Who is your choice?

[@bradjenkins932]

I run mine off of my rear remote for $150.

[@qfdforme]

Thanks, look forward to an installation video.

[@drewhouston2324]

Lots of people don't know about 3 Spool valves. for older tractors this is also a valid option to adding a 3rd function for a grapple and maybe a little cheaper. I looked into a diverter valve I didn't want the electric component involved so this is the way I went. These don't work with the newer compacts as the loader valve is integrated in different locations though. www.shortlineparts.com/complete-joystick-packageshtml/3-spool-valve-80-hp-tractors.html

[@ricklawrence3662]

Hey Drew, Can you tell me more about this please?

[@jethrobodine9867]

Cool stuff

[@GoodWorksTractors]

I appreciate it sir!

[@alanmcgregor4909]

On the Joystick you mentioned that it had a Button to activate the third function. Is it actually one button, two or a rocker switch?

[@ronheiden2750]

Website shows 2 buttons

[@bruceolson8474]

code is not working

[@chrisreddick36]

Thanks for sharing I can’t wait to see it in action

[@GoodWorksTractors]

IF YOU WANT TO RUN A GRAPPLE, THEN YOU NEED THIS: 5% OFF SELECT PRODUCTS WITH CODE GWT AT SUMMIT HYDRAULICS! summit-hydraulics.com TRACTOR DIVERTER KITS & HYDRAULIC MULTIPLIERS: summit-hydraulics.com/hydraulic-kits/?ref=goodworkstractors

[@elmo4vt1]

I know it's early after the video, but Summit didn't have a 3rd function kit with the hoses for any Deere products unless I missed it. Just the universal kits, and ones for Kubota's.

[@pfalcon9716]

summit-hydraulics.com/product/hydraulic-diverter-selector-valve-for-john-deere-subcompact-tractors/

[@retireddriver16]

Nice bug