Google Pixel 6 Disassembly Teardown Repair Video Review

[@piotrl.pawlak7851]

Man, you do it with such a ease.... Thanks for the in depth info. Short, to the point, concise. Some others would produce one hour long teardown. You covered putting it apart and putting it back together in less than 6 minutes. Thanks a lot.

[@PBKreviews]

you're welcome 👍

[@BillAnt]

Well, it's easy for those who do it for a living every day and with the magic of video editing. Even pros sometimes make mistakes and nick a cable. After 22 years of fixing phones, sometimes it happens to me too., but that's how you learn.

[@adamgraham1802]

saved me writing exact same thing

[@SalemTechsperts]

Fantastic teardown, vey glad to see how easy it is to replace the screen. Now we just need Google to actually SELL US the screen! I'm glad they didn't serialize components like Samsung and Apple, they deserve credit on that! Battery could be a bit easier to replace, and the soldered on charging port really sucks. Thanks again for these teardowns!

[@PBKreviews]

Thank you and You're welcome :)

[@MikeTrieu]

Nothing in this teardown either confirms or refutes serialization. We simply don't know until someone attempts to swap components from two similar devices.

[@SalemTechsperts]

​@@MikeTrieu Not this teardown, his 6 Pro teardown, he did exactly that. Swapped components to test what would work. Only thing serialized is the fingerprint reader, which makes sense. And Google provides you the calibration software to re-calibrate a new fingerprint reader, which is unheard of and a huge step forward for right to repair. kzbin.info/www/bejne/p6qonnaehLJ0hJI We can assume this applies to the regular Pixel as well.

[@xeon4888]

Really good teardown. Short but concise and full of detail. Exactly what you want.

[@PBKreviews]

Thanks!

[@lamgg4]

Might be a weird question but can the back glass be removed and made to be transparent? I really love the transparent phones like in Jerry Rig Everything videos!

[@PBKreviews]

I tried to remove the glass, it looks like it should be replaceable but the adhesive is really strong so I did not want to risk cracking or breaking it so I left it alone. But even if you clear out the back, on this phone you wont see anything since the glass sits over the aluminum uni body of the phone, there is only a square cut out for the wireless charger but aside from that you would not see into the phone.

[@neolordie]

gonna have to wait for a dbrand skin unfortunately

[@gilangrahmat9862]

@@neolordie wait for Jerryrig

[@_SPG_]

would love to just replace it with some plastic panel... more reliable, thinner and less weight))

[@renofumi28]

@@neolordie skin is released

[@fableroll]

You are an absolute hero for any phone repair shop. Thank you!

[@平和-v1z]

Thank you for pointing out the soldered on charging port! Hope devices will be more modular in the future, once Right To Repair passes...

[@PBKreviews]

You're welcome. Yea hopefully :)

[@b0nz1official]

Sorry but has nothing to do with right to repair. Watch this video: kzbin.info/www/bejne/i6XPmWianrigjbc&ab_channel=LouisRossmann It is when phone manufacturers use a certain chip that the manufacturers of these chips (eg. TI, Samsung etc) are not allow to sell or like Apple that even genuine Apple parts (e.g. from brand new phones) can't be swapped between the same two devices because they don't have the same serial number. Soldering a USB C port to the main port is not like that. It worsens the reparability, but it does not make the operation impossible like in the mentioned cases.

[@平和-v1z]

@@b0nz1official I know what you are talking about, but in my opinion, easier repairability also counts to R2R.

[@winebartender6653]

@@平和-v1z There is an engineering and durability reasoning for such choices. Not everything can be made modular while meeting goals set by the team for longevity. The same thing goes for those being upset about the how complex these devices are to disassemble. You can only do so much in such a small space.

[@b0nz1official]

@@平和-v1z Then watch the video. Louis Rossmann is probably one the most famous proponents of R2R. And he explains in detail why there is a huge difference and he doesn't want to force companies of using parts that are easier to repair because it could slow or hinder progress. He even explains that he is worried that people don't get the difference and you clearly are a candidate.

[@timg2727]

That main camera is enormous for a phone. I'm looking forward to seeing what Google is able to do in the coming months as they tune their image processing for the larger sensor. Right now they're still using basically the same image processing that they've used for several years with a much smaller sensor, so quality is only going to improve with time.

[@BillAnt]

Phone cameras are becoming an overkill. IMO For the average person even a 3-4 year old phone takes perfectly fine pictures. Pros are better off with high quality digital cameras with replaceable macro and tele-photo lenses.

[@cavc1979]

​@@BillAntit's more for video everyone wants a 5k recorder in their pocket so companies are racing to make that happen.

[@BillAnt]

​@@cavc1979- Most people can't tell the difference between 1080p and 4k especially on a relatively small phone screen, it's a waste of storage.

[@rchltmedia]

yes! finally the teardown i needed most.

[@PBKreviews]

👍😀

[@reedriker4772]

Great job on this teardown, thanks for providing!! I am eagerly waiting for a motherboard swap to be released for these devices so we can either prove or debunk the rumor that they are serializing parts to disable functionality..

[@PBKreviews]

Thanks! ya if I had another one on hand I would have tested it out but didn't have another one. I'm sure someone will do a video on that maybe ifixit or someone else pretty soon.

[@prakharagnihotri5579]

loved it! Wish they used split battery tech for a faster charging solution :(

[@PBKreviews]

Thanks! and yup would have been good if they did.

[@prakharagnihotri5579]

@@PBKreviews I came back here to know more about the device. I am now a proud owner of Pixel 6. ^_^

[@jvbenjamin]

@@prakharagnihotri5579 I'm here for the exact same reason. Would you recommend this device for long term use?

[@prakharagnihotri5579]

@@jvbenjamin Yes I would. 100% but i have a feeling that Pixel 7 will have all those tiny issues (that 6 has) solved and improved on. So if you are not on a budget constraint and can wait 5 months, Pixel 7 would be a better buy. 6a looks beautiful with that handy form factor but pixel 6 will still be a better overall device when comparing the two. So if you want one NOW close your eyes and get the Pixel 6. See if you can get a carrier sale price of $549 that would be sweet. Only get the 6a if you are tight on budget or want a small handy phone And pixel 7 if you can wait a bit. I have a feeling that the Pixel 7 will be $100 more than 6 (ie; 700 dollars) so you have enough time to save up.

[@thatvoiddude6188]

They nailed it with the 6 Pro.

[@PBKreviews]

👍

[@aooa25259]

Where is the other microphone, the one at the bottom of the phone, not the top one that you showed

[@anthonyamar9881]

OK Great, thank you but how do you repair/replace ONLY the back part protecting the cameras, please? can you show? I broke the back glass and the camera protection, unfortunately. Would be great if you could provide also where to find such repart parts on the web. Then, once all parts are back together, is the phone still waterproof??

[@titan401CT]

I don't know if this has happened before, but here it goes. My Pixel 6 suffered from a swollen battery and it pushed the screen away from the frame. I went to a Google authorised service center to get the battery replaced. A day later they said that they could not remove it. The reason being that they were unable to remove the screws. They even asked me if I had gotten it checked somewhere else. Of course I hadn't. They suggested that the screws seemed to be worn and gotten stuck. Im not sure if this was a manufacturing defect, but this spelled the end of my P6 journey. The screen now hangs by the flexible connector. Pity that the phone had been dropped just once and was in perfect shape with no cracks or dents. And barely 1.5 years old.

[@PBKreviews]

You can always use a power drill with a drill bit small enough to fit inside the screw head, and drill slightly into the screws to break off the heads. Then you can use a clamp or something similar to grab and twist the broken screws out and replace them with new screws.

[@antikommunistischaktion]

Of all the people I've seen try the battery on this thing, I've never seen them try to use that "pull tab" to try to slice the adhesive which I'd bet that's what it's intended for.

[@PBKreviews]

lol :)

[@hikkik]

Hey boys, I'm sorry to ask how to place screen back after i will replace the battery. Do i need some extra pad or something like that? Sorry im not the engineer.

[@saifulazhar3509]

So only one speaker at 3:27 the bottom. Thank God I almost think that my phone got a faulty speaker as only one side produces sound.

[@alexanderkisselinov1294]

Hi man, great video. My main mic stopped working - is this replaceable, or i need to go for a full mainboard replacement? The only mic i can find for sale is the upper one (with the flex cable). Thank you!

[@JoshsBookishVoyage]

You make it seem so easy.

[@PBKreviews]

👍

[@robertlindstedt4065]

So my glass that covers the camera is broken to where my camera is not usable, is it possible to just heat up that piece of glass and replace it or would it require a full teardown to replace?

[@LeelaKanakala]

great video. on the board, where can I find the JTAG port? my phone is broken, trying to recover the data.

[@Chinmay2727]

i am waited for this one 🤩🤩🤩

[@PBKreviews]

👍😀

[@MikeTrieu]

They had a mmWave antenna *placeholder* ?! Does that mean there are some variants of the Pixel 6 that do have that antenna installed? Does the mainboard even have that antenna connector?

[@PBKreviews]

Yes, the Verizon version will have the mmWave antenna. You can see the solder points on the board next to the battery connector where the mmWave antenna connector would be.

[@CleverCreatives]

Thanks for doing this. Did I miss where the memory/storage is located?

[@MarcDunivan]

Where is the USB Type C controller chip? What is it, and who makes it?

[@iamseanb17]

Every damn time 👍👍👍👍👍

[@lsdinc]

Is it possible to replace the charging port?

[@jvbenjamin]

Would you say the battery is easy to replace?

[@TheDJGlucose]

why does the inside of my phone look different from yours? is yours stock?

[@SteedDigital1]

Let's say you want to add mmWAV antenna? Is that an option because i really didn't want to get a locked verizon or att model just to get that but would like to add later if possible.

[@L1ghtbirdy]

So theoretically I just need to remove the display and have instead access to the battery after removing a few screws and the display swap seems easy af as well? That's great, means that in case of the 5 years of updates I have to swap it it's pretty easy to do. On the other hand: if the USB-C port dies there's the whole PBC to replace...

[@PBKreviews]

Yup. The charger port will require someone with soldering knowledge to be able to de solder it and solder a new one on. Some repair shops do it.

[@L1ghtbirdy]

@@PBKreviews honestly I managed to screw up my display only once and the only thing I had to do was a battery swap on a OnePlus 6 + the USB-C ports are dust eaters, so cleaning that one with some Tweezers. The phone I screwed up the Display was a sony Ericsson. Fun story tho: had a empty glass on my table with a spoon in it and knocked it off the table while my phone was laying on my PC. Catched the glass, but well... Display got spooned, lol :D Managed to modify a Dell Streak 5 to give it more internal storage, was fun. One of the first Android devices back then and the only thing you had to do was swapping an SD-Card on the PBC. Repair wise I really loved that one back than

[@PBKreviews]

@@L1ghtbirdy yep some things were a bit more simpler back in the day.

[@cinetekh9210]

Does Pixel 6 has sound dampening foam in loudspeaker same as other flagships have?

[@PBKreviews]

Yes it has it on the top speaker but not the bottom. The pixel 6 pro had it on both top and bottom speakers.

[@ВЕЛИКИЙСАНЯ-ж4щ]

Where is the bluetooth module installed?

[@Overonator]

Would a 3rd party repair shop replace the graphite heat transfer film if they replaced your battery?

[@PBKreviews]

If they have the part I would assume so but most likely only authorized service centers like ubreakifix which get parts directly from the manufacture would have the graphene heat transfer film to replace. However, if they carefully peel off the film and not damage it, it can be reused.

[@drvanand]

Hi.. Can you please tell me the position of the wireless charging coil in pixel 6... I am unable to get the exact position with the apple magsafe charger since the pixels lack the magnetic rings... So it is a hit or miss mostly😅 Thank you😃🙏

[@PBKreviews]

Hi, I don't have the phone with me anymore to take measurements but its usually in the back center of the phone.

[@drvanand]

@@PBKreviews THANK YOU 🙏🙏👍

[@Valendrizzle]

In bright sunlight on white background I can see the shape of the proximity sensor through the screen. Thought I had some burn in but now I understood.

[@greasyJFrancis]

I replaced my pixel 6 screen and have no touch function, is there a reset necessary? does this mean I may have damaged something else?

[@TheTruth-ge7fj]

my lower speaker broke , when can i get one?

[@arkarsoenaing8123]

If the volume buttons are not clicky, might need to disassemble the whole phone?

[@tiusic]

Thanks for the info. I was able to successfully repair my stuck lock button :D (just needed to shoot some isopropyl alcohol and air into the gap behind the button). If I want to re-glue the screen down (for water & dust resistance) what sort of adhesive should I use?

[@PBKreviews]

You're welcome. You would need this adhesive: www.ebay.com/itm/353905995635?hash=item526670ef73:g:zZkAAOSwNGBiBoss&amdata=enc%3AAQAIAAAA4BaT9F4j%2FRvU%2FRm43BO4Eh2J84UdL5H5doASFVJd5k1ZC25ElsX8rtYXCcAPTATz97vbjeev69USNoajzhKA7b%2Flnttu3q3Ixu1rbQWSpIrXSNti727GrQk4X5IktVDLv07zo2y59Djz1HnfG5dn4LW%2B2k2sEoZPgVJlzK8GShQaliufsqwyfuhpVPt1I7IA0Cn1OxukArLF0yJaGSirOTFn4nt2JFSxJU1bSh7OVVoYH24XD5NzNFHR61WSj6yQjUI0UMf3HNJee2X7lFgo%2ByQflqACvi8oEbDjYNelGM8w%7Ctkp%3ABk9SR_Lv--u8Yg

[@mancavecustoms13]

Damn, it worked. Here's a coment for your algorythm! Thanks!

[@PBKreviews]

Thanks :)

[@Theferg1]

Great video sir!! Sir I replace my screen and now the phone will not recognize the Sim card would you or anyone else have any recommendations? Thank you

[@SunnyCee_Events]

Another first from PBK reviews

[@Bl0wUMind]

Hey, i got a question, basically my Google pixel gets hot as some games, and the heat appears to be pretty much where the screen connector is, does it mean that the connector is defective? Or might something else cause it? Because sometimes it can get hot as a pan.

[@jpara_dise]

same as mine. but i noticed that it only heats up on the aluminum frame and the heat is not dissipating that much to the screen or the back. seems like the passive cooling graphene size used here is pretty small plus the poor thermal of the tensor itself due to samsung's less efficient fabrication

[@Bl0wUMind]

@@jpara_dise that might be it, but it's so long ago that now I'm having the new Pixel 8 Pro, the heat problems are completely gone, only if some weird programmed apps are running it might get hot, but not at any normal games, so basically Google learned from previous problems.

[@jpara_dise]

@@Bl0wUMind good for you. Seems like tensor g3 is a true upgrade from the tensor g1 chip

[@Andrew_EvsW]

So to replace the charging port I have to take out all the pieces of the phone? :(

[@tanushadithiya7136]

Is the Haptic engine soldered to the main motherboard?

[@PBKreviews]

No it's adhered with adhesive to the back of the mid plate shown @1:59 in the video

[@tanushadithiya7136]

@@PBKreviews oh thank you. Nice to see bigger taptic ones. The old round ones were trash

[@SEGArianer]

Did you switch components from another pixel 6 device to check if it is blocked like seen from Apple?

[@PBKreviews]

Hi, no I didn't have another one on hand to test that out.

[@Guy109897]

​@@PBKreviews If you could do that, it'll be super appreciated. Please let Louis Rossman know of the result, because according to a repair manual that was leaked, the camera(s) is software locked to the mainboard, making the phone less repairable for no good reason. If you let Louis Rossman know with evidence, then we can either name and shame them or clear their name, depending on the outcome. Perhaps this could be a part of your Pixel 6 Pro teardown review? If you do and Louis Rossman mentions you, it'll attract many more viewers too!

[@PBKreviews]

@@Guy109897 I will see if i am able to obtain 2 of the pixel 6 pro to test it out.

[@Guy109897]

@@PBKreviews 👍 Forgot to say - great work with this and all your other vids! Keep it up, super informative and helpful :)

[@PBKreviews]

Thanks! I appreciate it. :)

[@AbdulAziz-fj7qp]

u r fast man...❤️❤️❤️❤️

[@PBKreviews]

Thanks 😀👍

[@AbdulAziz-fj7qp]

@@PBKreviews speechless 🤣

[@picn8460]

It's nice that the video is short, but I feel like too many important things were cut off. For example, the double-suction-cup tool looked cool; but was very upset its use wasn't demonstrated!

[@PBKreviews]

Yeah, I don't go too into detail on those things because I feel if someone doesn't have any experience at all and doesn't know how to use any of those tools, it wouldn't be a good idea for them to do it in the first place because so many people end up damaging other parts along the way trying to fix one thing. So I just try to show the stuff people want to see like internal build, cooling and basics on internal part removal vs how to use a suction cup tool. Entertainment wise yeah its a good idea, but educational wise not so much I feel. For example, I've had people who don't even know which button is the power button on the phone try to take their phone apart and damage it when they shouldn't have been attempting it in the first place :)

[@mizanfaruq2653]

Is this the only youtube channel, where latest phone gets teared down first

[@tyukod88]

Unfortunately, my bottom microphone broke. I would like to solder it and replace it, but unfortunately I cannot find another microphone. Please help me.

[@PBKreviews]

Not sure where you would be able to find the part.

[@zaramoth042]

my bottom speaker got a water damage and also any recorded voice msgs sounding so muffled. I dont know where to find that bottom mic replacement part to change.

[@TheChameleon2008]

so to change the battery you have to pull the screen out? :(

[@PBKreviews]

Yup unfortunately

[@KramerPacer2]

thx i swapped case and screen thanks to your help! good guy. had to order another fingerprint sensor. my screen had no sensor and the connector from the sensor to the "plug" is discontinuous and only connected by a middle foil, so you cant even transfer it. it is a cheap part tho. cheers.

[@thomascalabro4664]

hello, or can we buy a new screen? mine is broken. Thank you

[@PBKreviews]

Hi here is a link: www.ebay.com/itm/353775198686?hash=item525ea521de:g:vToAAOSw6HhhlyjB

[@erickrdz5995]

excellent video! I have the pixel 6 but when I open tik tok or some video chat app with several people (only audio) the phone heats up a few minutes after opening the applications and if it heats up something strong, but the heating only occurs on the left side device (side, front and rear frame). This does not happen with other apps, and with games I have not tried it but I suppose it is the same. do you think it happens due to a software or optimization problem? the truth worries me: /

[@PBKreviews]

It's normal for it to heat up due to the fact the point of the heat transfer materials on the inside are to exchange heat from the components out to the outside of the phone. Also the main board is located on that side you are feeling heat, so again should be normal. But if it is extremely hot that you cant hold the phone then might be an issue with the phone or software/app you are running.

[@ViDaVerastegui]

It only has one speaker on the bottom?

[@yacinemd8826]

That's what am asking

[@yiyoink]

that camera module is massive

[@PBKreviews]

Yup lol

[@mrthomasanderson]

Why does it look like there are so many empty spaces vs the iPhone for example?

[@PBKreviews]

not sure

[@mrthomasanderson]

@@PBKreviews so I'm paying for empty spaces ;_; guess it explains why theyre able to make this cheaper vs other flagships

[@ashrafhoq2956]

Thanks for the video

[@PBKreviews]

You're welcome

[@hardeharde6854]

good job man.

[@PBKreviews]

Thanks!

[@StripofPaper]

This is great editing

[@PBKreviews]

Thanks

[@zuhayrzainuddin1150]

Wow great job PBK. I am so suprise about top speaker size. So big, and bigger than top speaker any smartphone with dual speaker and it's about same size as bottom one. Maybe has small foam ball inside. Thats company also think to make great audio and not only performance new Tensor chip and great software from this Google company. And how about version 6 pro.

[@PBKreviews]

Thanks! Yea the top speaker was surprisingly large and also has the white foam balls but the bottom didn't seem to have the foam balls. I will try to do the 6 pro as soon as I am able to get one in.

[@zuhayrzainuddin1150]

Oh I see. Thank you PBK. Thanks for your full explain. Great teardown video.👍👍👍

[@PBKreviews]

@@zuhayrzainuddin1150 you're welcome and thank you!

[@samsara7960]

This is the first teardown I ever watched. Good Job right there. I got a pixel 6, overall I I loved the phone. I have one problem tho, the fingerprint scanner. It's even slower than the Samsung I used for years. I saw its sth, attached to the screen. Is it a new tech? Google said they wanted it to be more secure and it's a new technology. What do you think? Thanks

[@PBKreviews]

Thanks. Yes its attached to the display and a lot of newer high end devices have the in display finger print readers. I personally don't love them since they are not as fast as the physical ones in my opinion.

[@LOUISVILLECARDINALS]

Is there a cooling system on this device ?

[@earnistse4899]

That's what I'm wondering

[@LOUISVILLECARDINALS]

@@earnistse4899 I didn't see anything that looked like one

[@earnistse4899]

@@LOUISVILLECARDINALS looking back it has thermal pad on the chip as well as graphene pads

[@LOUISVILLECARDINALS]

@@earnistse4899 okay thanks for the info

[@LOUISVILLECARDINALS]

@@earnistse4899 I just went back and looked I see what you're talking about now thanks for pointing that out

[@arafath_shxfin]

came here to see their new tensor chip

[@PBKreviews]

👍

[@LeeroyJenk]

Did you see it? I also searched but didn’t find it in the clip

[@CesarCybstem]

where is the best place to buy screen as quickly as possible

[@PBKreviews]

You can get it from here, they are reliable and from the looks of it cheaper than the ones on ebay. www.mobiledefenders.com/oled-display-assembly-for-google-pixel-6-black.html

[@BatfinksWings]

The display sounds very "hollow" when tapped, you don't get this with a Samsung for eg. It's feels "cheap". I guess this is because it sits over the battery?

[@PBKreviews]

It's possible its due to the fact the screen doesn't have a metal back plate or any backing and the plastic boarder of it has it siting slightly above internal components so nothing actually touching it directly so might be giving it that hollow sound when tapped.

[@BatfinksWings]

@@PBKreviews Thanks. Would this make it less strong or more likely to break in a drop?

[@PBKreviews]

@@BatfinksWings shouldn't affect it plus it has gorilla glass victus so should be strong.

[@riccardo94guerra]

what model is the display? display code?

[@PBKreviews]

Not sure what it is, didn't see any code written on it aside from that QR sticker.

[@Siimization]

My charging port got bit of moisture and now only slow charging works but even that only with Type A ->Type C charger cable. Type C -> Type C charging cable doesn't let any voltage to phone. So I'm saying biggest problem with pixel 6 build is that charging port module is not replaceable. Noticed same thing continues with pixel 7.

[@PBKreviews]

Yep, soldered charging ports on main boards suck. You can try to use a toothbrush to brush out any corrosion inside the charger port itself to see if it will help.

[@patrickthenomad]

Would of liked to see you take the graphene tape off of the back of the phone, also remove the buttons like you said.

[@nchurly]

what is the liquid name???

[@PBKreviews]

you mean for removing the battery? isopropyl alcohol. Here is a link for one: www.ifixit.com/Store/Tools/iFixit-Adhesive-Remover/IF145-400?o=4

[@nchurly]

@@PBKreviews thanks!

[@aooa25259]

I got water into my microphone by mistake. It's pixel. How to fix it, none of my videos are recording sound properly

[@karthik3685]

seems like so much empty space inside. They could definitely pack it all denser, and make the form factor smaller. (except the thickness of the camera bump)

[@PBKreviews]

In some ways yea but also the more compact and closer everything is, the more heat is boggled up and also makes for repair jobs even more difficult. Also the battery needs some room to expand during charging and so forth. I'm not an expert in electrical engineering or how they engineer the boards, so I can't speak on the behalf of how they arrange the layout and why they couldn't make the board smaller by arranging the components and chips closer to each other. :)

[@6StringPassion.]

I wish you would have taken two identical phones and tried exchanging the parts to see what Google disables. I saw the leaked document indicating some parts are serialized in the firmware on the main board to prevent people from repairing their own phone, similar to what Apple has done on the 13. Only Google or an ASP will have access to software to restore functionality. Obviously, if Google is doing that, there is no possible end-user repair without losing functionality. Score should be zero.

[@PBKreviews]

I did do that on the pixel 6 pro disassembly video, you can check it out on my channel :)

[@6StringPassion.]

@@PBKreviews Awesome. Just watched it. You now have a new subscriber. Thanks!

[@PBKreviews]

@@6StringPassion. thanks and you're welcome 👍

[@Sujeesh_Bhosri]

No liquid cooling?

[@PBKreviews]

nope

[@土块小]

(Google Translate) Hello, may I reprint some of your videos of dismantling the phone to the Chinese Bilibili video website? I will try my best to translate the video into Chinese and add notes, thank you!

[@PBKreviews]

Hi. As long as you dont remove the logo on the video, it should be ok. 😀

[@Jays1ndone]

Pixel 6 pro next?

[@PBKreviews]

Yes hopefully soon.

[@BanditmitKredit]

Thanks!

[@PBKreviews]

You're welcome!

[@isaiahrowley9830]

11 frames of you putting on the graphite...cool

[@PBKreviews]

lol

[@isaiahrowley9830]

@@PBKreviews It's actually pretty self explanatory because of the packaging. So it wasn't really needed. I'll give you that. Good video overall.

[@Malli_60]

Amazing

[@PBKreviews]

👍

[@HistoryMachine]

Where is the storage?

[@PBKreviews]

its soldered onto the motherboard under one of the shields.

[@joelch1105]

such a weird location for the vibrator motor...

[@adriankatava6662]

I have heard some folks say that the pixel screen feels hollow when you interact with it. I have not touched a pixel 6 yet, but can someone confirm or debunk this?

[@PBKreviews]

It's probably because of the fact the screen sits on top of a plastic frame that borders the sides of the screen and the center is somewhat hollow but very slightly. However the glass is gorilla glass victus and is strong so there are no worries of it breaking. Also most other phones have a metal plate or backing where the back of the screen is adhered to that plate so this one doesn't do that which is another reason you may hear that hollowness when tapped on etc.

[@adriankatava6662]

@@PBKreviews love your explanation👍

[@DaunteFalck]

I was curious to see what the guts of my phone looked like

[@benjaminaguilar34]

Where's the vibrator? 🤔

[@GALAXYGURUSA]

Much better than Samsung, toik a few tips from apple

[@ThomasMoneyhon]

Kind of confused why we couldn't just repost the original teardown video that Google took down prior to the October announcement instead.

[@pimpinal004]

Nice stuff

[@PBKreviews]

Appreciate it

[@drummerdude476]

Good luck getting that back glass off, they cemented the damn thing on

[@PBKreviews]

lol

[@weimanwong2608]

Looking forward the tearing off video of Pixel 6 pro.

[@PBKreviews]

Should be uploaded in the next 4-5 hrs.

[@md.hedayetulislamhira2672]

Your very first.

[@PBKreviews]

👍😀

[@leonardgrant6876]

Almost every new phone is harder to repair, the fingerprint scanner is a complication when It comes to screen replacement, also the charging port soldered to the motherboard will be hard to repair. I hate those phones which are hard to repair.

[@PBKreviews]

yep, I have a feeling that the screen replacements will probably come with the fingerprint sensor pre attached.

[@danielortiz6907]

Does anyone else Pixel 6 camera rattle, when shakes?

[@PBKreviews]

It's normal, its the OIS (optical image stabilization) for the camera.

[@superfisto]

Thank you.

[@OddClancy]

Why tf doesn't this channel have an iphone teardown?

[@rchltmedia]

the iphone is too many parts that need to remove. he is maybe not too experienced to disassemble iphones. update : the iphone is expensive

[@PBKreviews]

I have a few, but the main reason is that a lot of people are able to get the iPhones early or right before release and they upload teardown videos on them quick so there tend to be numerous teardown videos on them and isn't worth me spending the thousands of dollars on them when I won't get many views on the videos to recoup the costs etc. Hope this explains it. But when I am able to get my hands on one early, I will definitely do a video on it. :)

[@OddClancy]

@@PBKreviews Appreciate the answer and I fully understand. Thanks for this video also :)

[@PBKreviews]

You're welcome :)

[@jamman7344]

Bro where is the cpu??

[@JayGalatica]

It's a System On a Chip. The entire board is apart of the CPU.

[@md.sydulislam4362]

According to your opinion, what is the overall quality of this phone? How many points you will give to this one out of 10?

[@PBKreviews]

Repairability I gave a 6/10, quality of the phone is good and is an aluminum uni body so that's a plus as well.

[@horneblendeandcamguy]

The Pixel 6 is the biggest POS phone I've ever owned. Dropped from waist height on linoleum with a case and screen protector. Not even a scratch to the phone but it just shut off, completely dead. No response to any input, no lights, sounds, vibrations, or anything. uBreakiFix deemed in unrepairable. Glad I just got the stupid thing a couple months ago. Never buying a Google phone again, absolute garbage.

[@himanologanor4093]

ty

[@PBKreviews]

👍 you're welcome

[@JoseLopes-dl1nc]

Cool

[@PBKreviews]

👍