Google Pixel 6 Pro Disassembly Teardown Repair Video Review. Can The Parts Be Replaced?? UPDATED*

Google Pixel 6 Pro Disassembly Teardown Repair Video Review. Can The Parts Be Replaced?? UPDATED*
Fingerprint sensor calibration software link: pixelrepair.withgoogle.com/ (would need to run the calibration software after replacing the fingerprint sensor, then would need to run a factory reset for the new fingerprint reader to work)
Repairability SCORE: 5.5/10
Twitter: / pbkreviews
Instagram: / pbkreviews
Patreon: / pbkreviews
TikTok: / pbkreviews
Smartphone Tool Set: amzn.to/3P8yZuD
Smartphone Tool Set Deluxe: amzn.to/3qLq3AU
Home Tool Set: amzn.to/43ZmSUV
Other Tool Sets: amzn.to/43VzDQg
iFixit Isopropyl: www.ifixit.com/Store/Tools/iF...
Smallest Smartphone Thermal Camera: www.amazon.com/dp/B0BG2QC143?... (use code PBKreviews for $20 off.)
Crypto Hardware Wallets: shop.secuxtech.com/discount/S...
Adhesive: amzn.to/2XAvFga
300LSE Adhesive: amzn.to/3pSu40W
Heat Gun: amzn.to/2SOkS0x
Pry Picks: amzn.to/3YbBi0Q
Other Replacement Parts: www.etradesupply.com?acc=c5ab0bc60ac7929182aadd08703f1ec6

[@PBKreviews]

UPDATE: Going to pixelrepair.withgoogle.com and installing the fingerprint calibration software, then running factory reset gets the new fingerprint reader working!

[@SalemTechsperts]

Thanks so much for this update and your hard work, this is huge in terms of right to repair. Finally a company gives us the ability to re-program a part that was replaced. Hopefully the next step is to let us (consumers and shops) purchase genuine replacement parts!

[@PBKreviews]

@@SalemTechsperts You're very welcome. Yes hopefully every manufacturer would provide all replacement parts for purchase to the end user for repairs one day.

[@lmore377]

Can you make a video of the whole process? I'm really curious about how it looks and works.

[@PBKreviews]

@@lmore377 Hi, the process is simple and the pixelrepair.withgoogle.com/ website pretty much walks you through it step by step. I would make a video of it but I don't have the device anymore. I move through them quick to get to the next phone in line to take apart. But only takes about a minute to get done.

[@MarkStudent]

Please make a note of that in the video, since people may not be reading these comments and they will find your video to be incorrect.

[@deividasnavickas]

I give it 10/10. Although it might be difficult to replace. IT'S ACTUALLY REPLACEBLE.

[@PBKreviews]

Yup :)

[@pamdemonia]

Thanks for this! As someone who has repaired all of my previous phones, it's nice to see the next one I'm getting isn't a complete nightmare to get into.

[@PBKreviews]

You're welcome 😀

[@Guy109897]

Thank you for testing the component swap as requested! Perhaps update the description to reflect the fact that a new fingerprint reader can be used and how to do it? Anyhow, thanks for the videos and investigations! I would donate to you but it doesn't look like you have a patreon or anything... these reviews must be expensive!

[@PBKreviews]

You're welcome :). I will add info in the description. Thanks for the support and yep they are pricey :)

[@FBroetchen]

2:05 "there are 74 screws holding down the midplate that need to be removed". Me: fml.jpg

[@PBKreviews]

haha

[@alanramone4263]

screws are betten than glue

[@avalanche1990]

Excellent to know that everything is not locked to the original device and can be user or shop replaced without issue. Looks like this will be my next device when I need it

[@PBKreviews]

👍😀

[@bigjoshlevine]

Perfect video. Really appreciate the "here's a better look at that" sections too. Thanks!

[@PBKreviews]

Glad it was helpful!

[@BuckEighty]

You're literally the go-to man for dissemablies. Appreciate you!!❤

[@PBKreviews]

Thank you :)

[@heinminhtike9459]

That's a great video. Thanks for this. I've been looking for one for a few days. I was so excited to get a Pixel on the 28th and in the moment of excitement, I stupidly inserted the SIM ejector tool into the top microphone hole. It went, maybe, half way in. My question is, could it have damaged the water resistance of the phone? It didn't affect the microphone, but I am worried the water seals might be damaged and the phone will die a few months down the line 😂 Thanks

[@PBKreviews]

Hi, thanks and you should be fine. If it was even strong enough to puncture through, the hole on top of the small hole the frame has for it would probably be too small for a large amount of water to gain access to the internals.

[@CJTutorialSpace1]

A very quick and straightforward disassembly - assembly

[@PBKreviews]

👍

[@iar1980]

Thank you for the upload...👍🏽

[@PBKreviews]

You're welcome :)

[@Subuzgreatest]

Came here from Louis Rosmann. Not disappointed. You've earned a sub !

[@PBKreviews]

Thanks!

[@ZeekeXIV]

Thanks for the clean teardown! Silly question, but where would the GPS antenna/radios be? Around where the mmWave antenna is? I'm trying to troubleshoot why my GPS has been unreliable on my P6P.

[@PBKreviews]

You're welcome. I don't know exactly which antenna is related to it to be able to tell.

[@Truckdriverdivorcee]

I hope they make camera glass replacement parts soon because mine got scratched SUPER fast just from pocket dust. This phones biggest feature is the camera and within months I can't use it to it's full potential, not even close.

[@Ginko735]

Easy screen repairs👌 charging port sucks however. Thanks for this quick upload.

[@PBKreviews]

Yup! you're welcome. :)

[@lambda2141]

@@PBKreviews Is there a chance to repair/change the screen and get it water proof again?

[@PBKreviews]

@@lambda2141 ya you would just need to use the original pre cut adhesive strip that is made for the phone which usually becomes available later on down the line. Sometimes replacement screen assembly will come with the adhesive pre attached or provided. Not sure how quick the pixel replacement parts become available online though.

[@lambda2141]

@@PBKreviews Thank you!

[@PBKreviews]

@@lambda2141 👍

[@bryantsmith8164]

Good video🤴🏻🙌🏻💯 amazing pixel 6 pro

[@PBKreviews]

Thanks!

[@DeerJerky]

Awesome video! Came here from Louis

[@PBKreviews]

Thanks!😀

[@Gajh2014]

oh thank you for explaining that I will do exactly as instructed 😳

[@PBKreviews]

You're welcome :)

[@nskaries]

Excellent video 👍👍

[@PBKreviews]

Thanks 👍 😀

[@chilly556]

I know this probably sounds crazy, but do you think it would be possible for the Pixel 3XL's autofocus front-facing camera to be swapped in place of the 6 Pro's front camera if I tried? I watched your videos on both and the components seem to be a similar size but the flex cable sizes are quite different and not sure if they use the same connectors at all. Just really miss the autofocus from the 3XL's FFC as the 6 Pro uses a fixed focus lens instead. was wondering how feasible you think that kind of Frankenstein swap would be. And thanks for the great video as always! 😁

[@PBKreviews]

Hi, Thanks! If the connectors are the same and flex cable length and location etc, it might be possible but there may also be software issues where the phone might not read it properly. Wouldn't know for sure till you tried. :)

[@LubinNation]

Hey man love it, question for you. I feel you'd know this. My pixel 6 pro stopped vibrating a few days ago. Had everything turned on, no battery saver, checked everything and nothing. Restarted my phone and it worked ever since. Do you think that's a hardware or software problem? Thanks in advance.

[@PBKreviews]

Hi, its probably just a software problem. If it goes in and out then it would probably be a hardware issue, but if restarting it fixes it, then just software.

[@LubinNation]

@@PBKreviews good to know man, thanks a lot for the heads up! I'm not well versed with this stuff but was about to go exchange the phone. Thanks man, awesome video

[@marcocancarini5746]

Is the primary microphone (the one close to the charger port) soldered? Is there a way to replace it?

[@RaresRacean]

So I just got my display changed on my Pixel 6 Pro with an original one but unfortunately I'm not able to proceed through the calibration tool. I've connected the phone to the computer, the calibration tool detects it but it says that my Pixel software is too new for the tool and it's not working... god dammit how can google not update their calibration tool to the latest software really? Now I have a phone without the fingerprint sensor and it really sucks.... I hate it.... I've also paid like ~$500 for the original display + the change...

[@mahdiaslebahar]

Great video 👍

[@PBKreviews]

Thanks!

[@tientomsk]

Kindly thanks for your nice video! As I also saw your Pixel 6 teardown video, it has different location of haptic vibrator and it seems better in 6 pro (as I heard from some reviewers), is it correct? Secondly, the charging port of 6 pro can be released from motherboard and easy to change, and it's not changeable on pixel 6, right?

[@PBKreviews]

You're welcome. Both 6 and 6 pro charger ports are soldered onto the board. The haptic feedback motor location isn't going to really affect anything much. Since when people play games or run other apps when the phone is horizontal, it doesn't make a difference if its on the top or bottom. But I guess in vertical when you might be texting or other such actions, it might be better to have it on the bottom but again I think the feel from the haptic feedback should be felt pretty evenly throughout the phone.

[@tientomsk]

@@PBKreviews Kindly thanks for your reply! So, it will be hard to fix/change the charger port if it has some problem? Luckily that we still have wireless charging))

[@PBKreviews]

@@tientomsk yes correct, you would need to find a repair location that can do soldering to replace it.

[@tientomsk]

@@PBKreviews Hi, I just received my Pixel 6 yesterday and I realised that the screen color is a little bit yellow tint in comparison with other phones, like my old LG G8. Is your same yellow tint?

[@chevystingray]

Heard reviewers say the Pixel 6 haptics are pretty good, saw the linear haptic motor and knew that's why.

[@PBKreviews]

👍

[@MrKrueger88]

I've played with them and they certainly aren't to iphone level unfortunately .

[@benjmiester]

@@MrKrueger88 I don't understand what people are so enthralled about over there. I've tried my girl's iPhone numerous times, I feel no discernable difference.

[@Phantom-ys5ur]

@@MrKrueger88 People simply don't care. If a person buy an iphone he get used to it, if he bought an android he get used to it. both will happen after some time. even people get used to very crappy haptics in phones. that's the reality.

[@taurussho86]

@@benjmiester I have an S20 Ultra currently with the P6P coming. The s20 ultra haptic feel the same as the iPhones 13. Haptics have gone a long way with the many patterns and frequencies they can hit.

[@marvins8420]

Thats a really nice video. I was suprised that you can change the camera system. Because I read somewhere that the camera is calibrated to the logic board/ mainboard. But maybe that leak from the repair gudie was wrong?

[@PBKreviews]

Thank you. Yea It was leaked that may be the case but it might just be calibration for the auto focus or something else. Everything worked fine with no issues. Also after further testing, once the fingerprint calibration software from googles website is installed, and then the phone is factory reset after, the new fingerprint reader works.

[@michaelcarton3299]

@@PBKreviews My rear camera replacement showed an error on the screen and will NOT work. I did use an ebay, used camera. The old/cracked camera works fine when I put it back in.

[@ravindusankalpa9776]

Dat is good video Im you big fan

[@PBKreviews]

Thank you :)

[@nitinparmar341]

Hi, is the wireless charging coil exactly in the centre of the phone? Is the G logo on the back in the middle of the coil? Trying to align a magsafe ring.

[@PBKreviews]

yea pretty much in the center of the phone.

[@nitinparmar341]

@@PBKreviews thanks!

[@camerons.8322]

Glad to hear Google isn't locking down the hardware from ill intent. Having to factory reset the device after a fingerprint scanner swap is kind of a bummer, but at least you can still get in with the code. Major points off for the ridiculous battery glue though.

[@PBKreviews]

Yup 👍

[@BlizzardWind99]

Yup they need to do like Apple the pull tab adhesives

[@JIJPainting]

Aspects of repair Violent pulls have left the battery deformed and not safe

[@well-knownrepair109]

Good video!

[@PBKreviews]

Thanks!

[@AJJALALI]

hi when im on the phone other people can hear me clear but i cannot hear them and my speaker phone is not working either so should i replace both ear speaker and bottom main speaker ?

[@Javrien]

was I the only one looking for the rose gold color tensor chip lol

[@PBKreviews]

lol

[@elongarrix]

The whole time hahaha

[@ericshufro8150]

Will using a sim ejector tool in the mic hole at the top damage the microphone or seal? Thanks!

[@PBKreviews]

On the 6 Pro, the top mic and filter are seated in a L position so above the hole and would not be damaged. On the 6 though the mic sits against the hole, and even though I doubt poking it would damage it since its a solid strong piece, it might poke a hole in the filter but again I don't think it would be large enough to cause an issue for anything getting inside the phone to cause damage.

[@ericshufro8150]

@@PBKreviews Thank you for your comment. I wonder if the water seal is damaged.

[@PBKreviews]

@@ericshufro8150 you should be fine. If its 6 pro for sure you have no problems since filter is above the hole so wont be damaged

[@anthonyamar9881]

OK Great, thank you but how do you repair/replace ONLY the back part protecting the cameras, please? can you show? I broke the back glass and the camera protection, unfortunately. Would be great if you could provide also where to find such repart parts on the web. Or maybe you could repair it for me if I send it? Then, once all parts are back together, is the phone still waterproof??

[@PBKreviews]

There aren't any original replacement parts for it that I was able to find, but there is this one which I will link in this comment. But it doesn't look to come with the replacement adhesive strip. You would need to heat up your original glass cover with a hair dryer and pry it off, apply new adhesive strip (if there isn't one included with it you can buy adhesive to cut down and use) and re apply the replacement. Here is a link for the adhesive installation which may help understand how its done and the link to the part. Adhesive video: kzbin.info/www/bejne/imXMmoOLfrJqY7s Part: www.ebay.com/itm/393941995355?chn=ps&var=662512068839&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=662512068839_393941995355&targetid=1262749490782&device=c&mktype=&googleloc=9031132&poi=&campaignid=15428034462&mkgroupid=133947154481&rlsatarget=pla-1262749490782&abcId=9300763&merchantid=419683349&gclid=CjwKCAjw8sCRBhA6EiwA6_IF4aF4LPG_TaaqapwSVZ1qXvoOPN_Y-Zxgy7CrIDRsUk4B6HLcx_f_jBoCGKIQAvD_BwE

[@smashedintopieces000]

Would there be any way to replace or repair the microphones on the mainboard?

[@universalsoldier27]

Also having this issue since past 2 days. It is a common problem for pixel 6 Pro and support is trying to tell me that it's a hardware issue but it worked a couple days ago and I've not touched the hardware for the microphone. Many people complain about this issue either after a screen replacement or factory reset.

[@IIIIIIIIIIIIIIIIIIIIIIIIIII258]

What is the clear notch at the bottom on the Pixel 6 Pro, between the charger and the speaker port. I saw that it connects inside to something. Is it a light sensor or LED?

[@PBKreviews]

Not sure exactly what you are referring to. If you can circle it on a screenshot and upload it online to show me, that would help.

[@neildagasstrysome7216]

Louis Rossman talks about you, well done man !

[@PBKreviews]

Thank you! :)

[@JS-wr4tp]

Thank you for the teardown. From a security point of view does the locked fingerprint scanner mean that if the phone is locked one can't simply swap screens to gain access?

[@PBKreviews]

You're welcome. Correct, but the finger print reader itself is not what stores the finger print. It's stored on the device itself. The fingerprint reader is just a reader so if it goes bad, or you break your screen, it's going to be a pain to replace etc. However I do understand the security point of few if people are able to make 3rd party readers for the phones which don't meet the standards of google or the manufacturer and thus can be more easily fooled to reading fingerprints close to but not exactly a real finger. Has its pro's and cons but at least from what was leaked before (that the cameras might not be user replaceable), the cameras are replaceable and not locked down so that's a good thing.

[@big_boy_chris]

@@PBKreviews Do you know if it will would if used with a digitizer?

[@PBKreviews]

@@big_boy_chris not sure what you mean

[@zaphenath6756]

@@PBKreviews will fingerprint reader work if a screen protector is installed?

[@PBKreviews]

would need to be one that is compatible with in display fingerprint sensors. Or else it would have issues reading fingerprints.

[@CliffR]

I may be alone in this but I like that the fingerprint reader cannot just be swapped out. Not sure how the fingerprint data is stored but would hate if a thief could just swap it and access the phone.

[@TiggerLyOne]

Sensors only take information, not store it. There is a security chip on the motherboard that stores your biometrics.

[@taurussho86]

Doesn't really matter, it's optical and it's not that good as it can be fooled alot easier. I wish I knew it was optical before I ordered mine. No facial recognition is a bummer too.

[@PBKreviews]

The fingerprint reader can be swapped, I updated the description and added a subtitle to the area of the video stating that once the fingerprint sensor is replaced, you need to run the google pixel fingerprint calibration software (pixelrepair.withgoogle.com/) and then run a factory reset and that will get the new fingerprint reader working.

[@CliffR]

@@PBKreviews Ouch. So to get a new screen you have to factory reset. Guess if this little guy gets busted it's just time for a new toy, since I'm reinstalling either way lol

[@CliffR]

@@TiggerLyOne I knew the security chip part, but just worried that replacing the sensor may setup for some exploit. Probably just silly thinking though

[@zuhayrzainuddin1150]

Thank you sir. Nice video and great excellent teardown. Wow that's Pro version overall it's greater than regular p6 but about same design. And better buzzer speaker to. Both speaker has white foam ball. This phone is so perfect. I want to buy it. 😍

[@PBKreviews]

You're welcome. Yea its a good device. :)

[@benjmiester]

I'm surprised how good the bass is from the speaker on this phone. I kept feeling this thump during setup and I thought it was haptic vibration but then I discovered it was actually a low pitched sound from the bottom speaker. It's quite good!

[@WolfCommander]

Has anyone found a way of replacing the backglass without damaging the wireless charging or at least a way to unplug it all?

[@raevod6361]

Not many people have the subtitles turned on so i recommend you to pin the comment with the update

[@PBKreviews]

Thanks, i think this method I put automatically shows that subtitle for the update but i will look into it and also pin comment just incase.

[@CliffR]

So why do they glue down batteries? I understand to keep from moving but isn't the entire build made with like no free space that it shouldn't move already?

[@neolordie]

there is a little bit of wiggle room, because batteries expands (without the right space, you get a note 7), but there's no need for strong adhesive

[@PBKreviews]

yes as the previous com-mentor mentioned. Battery needs some room to expand when charging etc. Also there are companies (like xiaomi) who use much better adhesive design which is reusable easily without the need of heat or other tools to pry the battery off. Not sure why more companies don't go that route.

[@Gajh2014]

well if you think about it the finger print reader should not be swappable bc someone could swap it with their fingerprint reader and get the phone to open. It's really a very respectable security feature to make sure no one can get in to that phone who does not own it.

[@PBKreviews]

You can't just swap it with your own fingerprint reader, the phone still has security features in place which reads and verifies the installed fingerprint reader to be the same make from google etc. Also I am sure the fact that its required that the calibration software as well as a factory reset is required after installing the new reader, ensures that any "hacked" or altered fingerprint reader/software would be wipped/cleaned before that fingerprint is operational.

[@mohamedsakhiri6583]

anywhere I can buy a motherboard replacemement for it?

[@SteveFrench585]

That is ridiculous. Information isn't even stored on the fingerprint scanner. Previous models of pixel could have the fingerprint scanner replaced with no issue. Looks like Google is trying to pull an Apple on us. And, soldering one of the most used parts (Type C port) is just stupid.

[@PBKreviews]

Hi, after further testing, once the fingerprint calibration software from googles website is installed, and then the phone is factory reset after, the new fingerprint reader works. Also ya sucks the charger port is soldered onto the board.

[@SteveFrench585]

@@PBKreviewsthank you for the confirmation! You're awesome 👌 Is the software for the calibration on the Android Flash Tool?

[@michaelcarton3299]

How about a camera replacement update? I just replaced mine and all I get is an error message. It will not work at all. Black screen and it force closes. Putting the old camera back with a cracked lens works fine.

[@PBKreviews]

Sometimes you need to do a software update on the phone and if it doesn't help, factory reset on the phone so it programs the cameras and syncs with the main board. But make sure you backup your data.

[@michaelcarton3299]

@@PBKreviews sometimes, as in you know this works??

[@2003vstrom]

so there were reports at one time the 6 pro would have stainless frame and the the cheaper pixel 6 would be aluminum, so is the the main frame of the 6 pro stainless?

[@PBKreviews]

Hi. I didn't really look into that. But when looking at the video and from what I remember when I had them open, from the most part they looked to be the same but there was a subtle difference in the color on the inside of the frame. It can be possible that one is stainless. The pixel 6 looked darker compared to the pro if you compare both videos.

[@theunqualifiedgamer2344]

hey everytime i try to calibrate my fingerprint reading it says the software on my phone is to new for the tool or it cannot find the unique calibration for this device anyone have these issues?

[@AbdulAziz-fj7qp]

nice sir....👍👍👍👍👍👍👍👍👍

[@PBKreviews]

Thanks!

[@PushyPawn]

I can't believe he gives the pixel 6 & 6pro scores of 6 & 5.5/10 respectively. All because the adhesive was "too strong". All the screws are the same and the whole thing comes apart easier than almost any other phone. I wonder if he's ever tried taking apart an iPhone? With his scoring skewered so much, it'll be negative numbers.

[@rossmanngroup]

Do they give you a schematic? Is the charge port soldered on or on a flex cable? Do you have to remove the screen, the most expensive part of the device, to get access to everything else or not? It's fair everything considered.

[@PushyPawn]

@@rossmanngroup I've seen a lot of your videos so I know where you're coming from. So, with all due respect: 1. The schematics in your possession, are they easily obtained? (& at what $) 2. The skills and knowledge to understand them and all the equipment needed to diagnose and conduct repairs, how many consumers possess all that? 3. I've been charging between 2 & 5 usb-c devices daily since 2017, not one has failed yet. (3 failed micro-usb's meanwhile) 4. As for the screens, yes indeed, some require more heat and caution to remove. However I'll happily take a job replacing both sides of a non-Apple phone, over just the back glass of an iPhone. ✌

[@PBKreviews]

I rate it based off both replaceable parts and ease of the disassembly. If the disassembly was from the back vs the front where the screen is (since most people can easily damage a working display trying to replace an internal component or part) then I am sure I would give it a higher score. Also the fact the charging port is soldered onto the board makes it much more difficult for most people to replace vs a charger port that would be on a flex cable that is user replaceable without having the know how of soldering. I have taken apart hundreds of iPhone in my day and always prefer to work on androids personally. I wouldn't rate an iPhone in negative digits, but most probably in the 3-4 range due to the amount of different sized and type screws and time it takes to take the entire thing apart.

[@slaps101]

What kind of finger print reader is it? Optical ones use a camera and throw light onto the fingerprint to read it and ultrasonic readers don't need light to read them. The pixels don't have a camera reader but throw light onto the finger anyway. Can anyone enlighten me?

[@cptcrogge]

I believe its optical

[@slaps101]

Yeah that's what I suspected because of using light. But that sensor they are using is as thin as a sticker, much thinner than a camera sensor normally is. I've not seen one like that before.

[@PBKreviews]

I believe its optical, also it's not as thin as it looks, it is thin yes but not as thin as a sticker. If you watch @1:10 in the video (when the screen is on its side before I disconnect the cable from the board), you can see it from the side and see somewhat the thickness of it.

[@christianjairperezrascon851]

where can i buy the screen?

[@regoat]

very good video

[@PBKreviews]

thanks 👍

[@TheCod3r]

Here from Louis Rossmann's channel

[@PBKreviews]

Welcome!

[@AngryChineseWoman]

The side buttons on my Pixel 6 are a bit wobbly, they have a bit of play. I don't know if it's normal and repairable. It's not noticeable when using a case though.

[@PBKreviews]

I think its normal, the ones on these pixel 6 pro are somewhat the same. Not really wobbly but not completely affixed either. They need some range of movement so they don't grind or get stuck easily.

[@benjmiester]

I have a tiny bit on my power button. P6 pro. I didn't notice any but thought I'd try after reading this. So not sure how much that qualifies as.

[@creamylulu3427]

that camera is a big boi

[@PBKreviews]

Yup! 😀

[@Jays1ndone]

Yes!

[@bookaesthetics2426]

Please make a video on realme 8i

[@akramdogha3778]

"seven T4 screws" i heard that "74 screws" since i'm a repair technician myself i almost had a heart attack thimking i have to unscrew 74 screws in a single phone, my dude you almost killed me lmao.

[@PBKreviews]

haha

[@Chinmay2727]

Amazing

[@PBKreviews]

Thank you!

[@cracksi001]

Thx ..now i know my baby 🐥

[@PBKreviews]

You're welcome :)

[@onegodonly8321]

Bohot badiya

[@PBKreviews]

Thanks! :)

[@bookaesthetics2426]

Bro please make a video on realme 8i

[@ArtemkaProGamer]

Графитовые наклейки при обратной сборке нужено наклеивать

[@user-bp8yg3ko1r]

Very good video, part serialization, needs to be forbidden.

[@PBKreviews]

Thank you. After further testing, once the fingerprint calibration software from googles website is installed, and then the phone is factory reset after, the new fingerprint reader works.

[@ChrisYx511]

@@PBKreviews where do you find the fingerprint calibration software?

[@PBKreviews]

@@ChrisYx511 pixelrepair.withgoogle.com

[@kristysomerset]

What's the lcd

[@ChristopherFlanagan]

Correct me if I'm wrong, but that's not an optical fingerprint sensor, is it?

[@PBKreviews]

Yes it's optical, it looks really flat but from side you can see it has some thickness to it. When I left the screen off from frame if you stop the video when the screen is on its side you can somewhat see it.

[@ChristopherFlanagan]

@@PBKreviews Hmmm, always thought it needed to be some sort of macro camera 🤦🏻‍♂️

[@Vondereich]

Eh, the logic board position is not on the top like most android do ??

[@PBKreviews]

no its an L design

[@Overonator]

Why are batteries glued in when they are in tight location with no ability to move around anyway?

[@justinsielicki]

So they don't jiggle.

[@Overonator]

@@justinsielicki I would think they wouldn't jiggle even without the glue

[@PBKreviews]

they would move around a bit inside without being adhered down someway, but other companies like xiaomi have much better design as far as the battery adhesives. They are like pouches that can be reused and is much easier to pull out the batteries.

[@Overonator]

@@PBKreviews Yeah adhesive is crazy.

[@dln5]

I did not see any cooper cooling pipe in the phone?

[@PBKreviews]

nope doesn't have any. Just uses the metal mid plate along with graphene films and the aluminum uni body to transfer heat.

[@bishnu__newar]

Is there way to open from back panel

[@PBKreviews]

Nope the back has the unibody frame so its closed off for the most part aside from the cut out for the wireless charging.

[@StevenHuxley]

How would one keep the water resistance after opening the phone?

[@TheChameleon2008]

you have special machines for that

[@PBKreviews]

You would need to install new original pre cut adhesive that is made for the phone. Usually they become available with replacement parts on the market.

[@michaelcarton3299]

@@PBKreviews you also need to apply the correct pressure for the correct time in the correct locations after the original adhesive is placed.

[@AppleReviews]

*LIFTING battery with that tab located in the middle of the battery when adhesive tabs are located in the bottom and top is........ asking for injury (hospital) because battery might SNAP in half!!!!!*

[@PBKreviews]

It would require a great deal of strength to snap the battery in half like that, the battery isn't as flexible/bendable as some other phone batteries. But yea in general I don't like the designed method of the removal for this battery. Also once you apply isopropyl alcohol or heat up the adhesive from the back, it makes it easier to pry off.

[@AppleReviews]

@@PBKreviews those pulling tabs sometimes hold very well - and how many times you have to snap battery and possibly be blind and burned? It is like sapper

[@TechDove]

Why does yours have a white pin stripe on the back glass? Edit: Doh nevermind, I see it's the lighting lol

[@PBKreviews]

haha yep just the lighting :)

[@pimpinal004]

Nice

[@PBKreviews]

Thanks!

[@jasongreen809]

What do I need to check, the fingerprint calibration failed and I was in Factbook mode

[@PBKreviews]

You just need to follow the steps on the website (pixelrepair.withgoogle.com/) If it fails, and you have replaced your fingerprint reader, it might be due to a none original scanner or defective reader etc.

[@jasongreen809]

@@PBKreviews I used a cheap data cable. This was a customers phone. I went to the website but the software said it failed but it didn't say what failed. I did went to the site and put it into fastboot mode. I'll see what I'm doing wrong. *sigh*

[@PBKreviews]

@@jasongreen809 It could be the cable or the drivers on your computer as well. When you run the software, does it detect the phone? if it does then the drivers are not the problem and might be the cable.

[@jasongreen809]

It detects the phone. But it says failed and nothing else. I told the customer to backup the phone in case of a factory reset and bring your original cable.

[@ebadathossain8969]

Google should use copper cooling heat pipe

[@PBKreviews]

👍

[@himanologanor4093]

nice

[@PBKreviews]

👍

[@al.3otshl147]

use thermal paste liquid metal in the phone

[@PBKreviews]

It's not as easy as said n done. Since liquid metal is highly conductive, you cant just apply it as is. If it spills on or around the chips, it will definitely short the phone. Would require a closed compartment so the liquid metal doesn't spill out, so its not like thermal paste that you can just apply on top of the processor and not worry about it liquefying and spilling from the sides.

[@md.hedayetulislamhira2672]

xiaomi civi disassembly plz

[@PBKreviews]

Hi, there are already a few on KZbin but if I find one for a decent price, I will do it.

[@rajnish8918]

This is for intelligent people for sure..

[@Iamtechboy]

Thanks for all of this , but i geuss its better if u just swap the motherboard so u can know every single thing that its anti-rrpear shit

[@PBKreviews]

You're welcome :)

[@ipha]

I wonder if a full factory reset would make the finger print sensor work.

[@PBKreviews]

After further testing, once the fingerprint calibration software from googles website is installed, and then the phone is factory reset after, the new fingerprint reader works.

[@krypton623]

I fucked Up sind Mixed my scrwes while repairing. Now i dont know wich one belonges where :(

[@PBKreviews]

Scroll down and read this guide from ifixit, they list the screws by size so you can measure them and see which goes where. www.ifixit.com/Guide/Google+Pixel+6+Pro+Battery+Replacement/148769

[@Sigmanovar]

No cooling pipe?

[@PBKreviews]

Nope

[@Sigmanovar]

@@PBKreviews very disappointing,

[@bluegizmo1983]

0:08 Your thinking of crApple products, Google doesn't do that.

[@theodorosk.8932]

Louis Rossmann brought me here

[@PBKreviews]

👍👌

[@iSamYTBackup]

wow it's jyst like an iphone if you replace something you have to reprogram it atleast we have the software to do the job

[@PBKreviews]

Yup!

[@rockstarmn2629]

Sir I am from India I purchased one google pixel 6 pro but the screen got cracked please help me out to get the screen please sir I am ready to pay for the display please reply sir

[@PBKreviews]

Hi, what do you need help with?

[@rockstarmn2629]

@@PBKreviews I need google pixel 6pro display to get replaced

[@rockstarmn2629]

@@PBKreviews I purchased the phone from outside India but now as it is not launched in India i am not getting the display anywhere please help me

[@PBKreviews]

@@rockstarmn2629 They sell it on ebay, here is a link: www.ebay.com/itm/234291290151?hash=item368cd96027:g:j7gAAOSwoXZhlNiC

[@rockstarmn2629]

@@PBKreviews thanks for that but this are not legit as I have checked those are lcd panel not led

[@gsxr600rafii]

Louis Rossman sent me here

[@PBKreviews]

Welcome 😀

[@elmotlk]

You should be able to select "new fingerprint sensor" in settings, then apply your password so you an re-use it. It's really sad Google went this route

[@PBKreviews]

Yup, it's unfortunate.

[@traviskoh3318]

Who manufacturing pixel 6 now?

[@microgamingrepairs1981]

All things considered, the fingerprint scanner should be married to the board for security purposes. I know if my phone was stolen I wouldn't want someone with the knowledge of swapping a screen to be able to access my information by doing a simple screen swap even though one could log in to their google account and lock the phone, not everyone knows how. Considering everything else can be replaced from the looks of it it's a good thing.

[@PBKreviews]

After further testing, once the fingerprint calibration software from googles website is installed, and then the phone is factory reset after, the new fingerprint reader works.

[@microgamingrepairs1981]

@@PBKreviews in a way that's very good then as it still protects security. Glad to see they did not go the way if Apple on this

[@PBKreviews]

@@microgamingrepairs1981 👍

[@edgarcia4475]

Where was the TENSOR chip?

[@PBKreviews]

You can see it @6:02 in the video.

[@edgarcia4475]

@@PBKreviews ok i see it now, google was making it to be an astonishing work of silicone that i was expecting some shiny piece of metal, thanks for pointing that out for me.

[@PBKreviews]

@@edgarcia4475 Ya I also thought it would be a nicer presentation until I saw it lol

[@djangid3476]

Need pixel 6 pro motherboard india

[@AppleReviews]

Fingerprint not replaceable - like iPhone :)

[@PBKreviews]

Hi, it is replaceable, I had updated the video with text mentioning that once it is replaced, if you run the google calibration software and do a factory reset, it will work 😀

[@AppleReviews]

@@PBKreviews just saw the news - interesting

[@PBKreviews]

@@AppleReviews 👍

[@rchltmedia]

it *always* the fingerprint is locked!

[@PBKreviews]

After further testing, once the fingerprint calibration software from googles website is installed, and then the phone is factory reset after, the new fingerprint reader works.

[@anakinskyguy6582]

It is impressively engineered, kinda looks like an iphone from the inside.

[@PBKreviews]

👍