GOOSKY RS4 LEGEND LET'S TALK ABOUT SETUP

[@Rcheliguy]

Absolutely fantastic. I've just purchased my first pnp kit being the rs4 legend. I've seen a few build videos over the past month before buying the kit, but wow wow wow. Ian your videos on the build are far far farm more indepth and easier to understand than the others. I'll definitely be using your videos as a guide when I carry out my build. Absolutely fantastic I'm so happy I come across your videos today. Thank you for taking the time to make the videos on your build journey. I look forward to seeing your Maiden flight Ian. Again thank you and happy and safe flying. Oh ive subscribed aswel to your channel. Best regards rc heli guy 👍🏻🚁

[@IansRCExploits]

It's a very nice kit, and goes together well, take your time and enjoy the build, my biggest tip is watch the screw sizes!! And be very careful not to tighten and strip the aluminium parts!! Thanks for watching and commenting and enjoy the build 😀👍

[@Rcheliguy]

@@IansRCExploits appreciate the advice Ian. Thank you 😊 👍🏻

[@michaelworrall6804]

Morning Ian… I think this video focused on setup rounds off this series brilliantly… You have taken us through the whole build and setup life cycle and created a great reference for the RC hobby … great contribution and much appreciated … this setup video was especially interesting which is also useful for fixed wing beginners … Many thanks … Michael

[@IansRCExploits]

Thank you Michael, thanks for watching and commenting 😀👍

[@rjfetz1]

At 8:05 you set pitch curve a 0,25,50,75,100 for setup purposes. What do you fly with, and why have it set that way for setup purposes? Thank yo

[@IansRCExploits]

I set the pitch curve linear so as when you're setting up the collective you are getting the full travel of the main blades, so if your pitch curve was set to say 25 30 50 75 90 you would not be able to get 12 degrees + and 12 degrees - pitch when you set the heli up as the pitch curve in the transmitter would limit the collective stick movement, what do you mean by what am I flying? Do you mean my radio? If you are, then I fly Spektrum with a DX8 gen2 😀👍

[@rjfetz1]

@@IansRCExploits I followed Westhobbiesrc, helidirect setup videos. Set pitch curve to 30-40-50-75-100. No problem getting 12 degrees pitch. That is why I asked.

[@IansRCExploits]

Yes but the linear curve will give 12 degrees + and - starting the pitch curve at 30 would stop you getting 12 degrees - But I guess there's more than one way to skin a cat 👍

[@rjfetz1]

@@IansRCExploits but I got 12 + - without the linear curve. I'm not trying to give you a hard time. I'm just trying to understand how I got the 12 degree pitches w/out a linear curve?? Its my first setup.

[@IansRCExploits]

Yes that is strange, have you flown the Heli yet? What concerns me is if your pitch curve starts at 30 and you have 12- pitch you won't be able to adjust your pitch curve in normal mode and when you lower the throttle the heli might drop very fast, I set the heli up linear and get 12degrees +- then adjust the pitch curve to make the heli a bit more relaxed when lowering the throttle 😀👍

[@ModelAV8RChannel]

Very helpful instruction Ian.

[@IansRCExploits]

Thanks Adam 😀👍

[@adnanlamri]

Nice😃. You finished the build🎉🎉🎉. It's good to see that see is ready to go! Thank you for giving me a shoutout. It was a pleasure to help you with the part of the swashplate. This is why this community is such a nice thing. Helping eachother with those kind of things is gold to me. I was once struggling with my new purchased 330S,.she was all over the place. You did an outstanding effort to help me get her flying as she supposed to do. Hope you did got the chance to do the maiden today🥳😀. Cheers

[@IansRCExploits]

Thanks Adnan 😀👍

[@ValeryHedouin]

Hello Ian, I have to deal with the same issue but flying mode 1. I scratched my head to for hours and I saw you vidéo after I fixed the problem ! I had only to reverse the CH3 servo on the BT apps and now all run correctly. Good job ! regards. Valéry

[@IansRCExploits]

😀👍

[@Isleofwightr.c-ec2ef]

Glad you got her sorted out Ian, looking forward to the maiden flight...jeff.

[@IansRCExploits]

Thanks Jeff 😀👍

[@heathclifflaurent2869]

Hi Ian, thanks for the video. I have bought a RS4 from a club member who was flying VBar. I fly Spektrum. My ESC is a hobbywing that came with the helicopter. I bought the GT020067 has the flight control. I would like to know when in normal mode or stunt one my throttle has to be 50% for the motor to start? Also how did you do a throttle calibration on the ESC I struggle on this one. Just find out if yours works fine? Many thanks.

[@IansRCExploits]

Normally to calibrate your ESC you put your throttle on the transmitter to 100% turn the transmitter on plug your flight battery in and as soon as the start sequence of the ESC finishes and you here 1 beep you lower the throttle and the ESC will give your battery cell count and finish initialising!! Now, I wouldn't advise you to do this with your main or tail blades attached to the heli just in case it spins up!! I would also search on KZbin for a throttle calibration video using your specific Hobbywing ESC 🤓👍

[@IansRCExploits]

Maybe this will help kzbin.info/www/bejne/rZu5c3Smp5mAeqssi=WyFajM7FltJYjURo

[@heathclifflaurent2869]

Hi Ian, Many thanks how do I get to the parameter tuning page please. I having the same issue with the gyro. Going the opposite direction.

[@IansRCExploits]

What Gyro is it?

[@heathclifflaurent2869]

@@IansRCExploits hi Ian it’s the Goosky RS4 Flight Controller : GT020067

[@gpxrp7520]

I am definitely considering upgrading to a goosky rs4, I'm currently flying a goosky s2, I'm doing very well with it, so I'm considering buying the rs4, I like that its a bit heavier than other models, I guess my question is, are the heavier models more stable to fly. I'm new at the hobby and looking for some helpful info, thanks

[@IansRCExploits]

Yes the bigger models are more stable, I saw your other message about choosing between the RS4 or the TB4 and I would say stick to what you already know, as you're used to the GTS flight controler!! The RS4 will be a lot more powerful than the smaller one as it runs on 6s what I also liked about the RS4 is that it's a very comprehensive kit, motor, servos, flight controler and esc all in one box 😀👍

[@DadsRCHangar]

Great App that Ian, great to see you give a great explanation. 🫡

[@IansRCExploits]

Yes it does make the setup very easy Chris 😀👍

[@ValeryHedouin]

Hello Ian, I have to deal with the same issue but flying mode 1. I scratched my head to for hours and I saw you vidéo after I fixed the problem ! I had only to reverse the CH3 servo on the BT apps and now all run correctly. Good job ! regards. Valéry

[@IansRCExploits]

Well Valery, I'm glad my video helped you!! Lime you I spent many hours scratching my head Lol Thank you for watching and taking the time to comment 😀👍