Hallo my friend! Please add a video note about pressure compensated AXIAL bellow, after the pressure compensated ELBOW bellow. I think is the only thing you missed. Very beautiful video!
@shivnandan5748 Жыл бұрын
Sir, Videos are most most most..... Helpful for better understand of hidden knowledge.
@vivektripathi2743 жыл бұрын
Hello Gauri Shankar Ji. Your content was very good and you explained it in very easy way. So much thanks to you. Please keep on posting such technical learning videos.
@nickdoshi4168 Жыл бұрын
Excellent way of explaining the fundamental of Bellows
@krishbros85463 жыл бұрын
Your content was very good and the way of explanation is very very easy to understand. Thanku sir
@ahirepranotiparashram22183 жыл бұрын
Can you suggest something that allows angular and axial movements ?
@gautamshah772 ай бұрын
I am from Ahmedabad want to manufacturing facility expansion joints please let us know how you can help me ??
@rameshjeshnth6231 Жыл бұрын
Sir, how to remove Hinged bellow from 30m high. What is the procedure.
@yasserrabie72252 жыл бұрын
Very useful video appreciate
@priyanshushaw90445 ай бұрын
Sir how to calculate lateral and axial spring rate?
@sreetamdas71405 жыл бұрын
Can metal bellows deliver compressed air if bellows are subjected to external compression force?
@uddiptanath60553 жыл бұрын
Sir, this was a very good explanation! Sir I have a question in mind. Can expansion joints be made up of socket and spigot combination? where a flanged ring and a rubber gasket are placed in position on the spigot end.
@blahbleh5671 Жыл бұрын
sir yes sir mr sir
@uddiptanath6055 Жыл бұрын
@@blahbleh5671 pagal hai kya?
@sachinjacobabraham55133 жыл бұрын
How do we know/calculate the loose gap between nut in tied bellows wrt each piping sizes? Any standards available?
@gourisankarsamanta76703 жыл бұрын
Actually no gap is required. But for easy lateral movement, 1 mm gap is recommended.
@yasserrabie72252 жыл бұрын
Do you have video for non metallic below in high temperature application
@gourisankarsamanta76702 жыл бұрын
May have a look to below video : kzbin.info/www/bejne/Zpu5kI2Oqaljm9k
@arjunpoudel43194 жыл бұрын
Where are you located sir?can we make this bellows in india or in nepal? and how is the market...I' can make complete gas expansion joints that I'm doing same work in south korea.please can u help me sir?
@gourisankarsamanta76704 жыл бұрын
I am located at Kolkata, India. Yes, you can make this type of metallic bellows, market is also good in the industry. Almost all industry require it for pipelines.
@oscarcabezasherrera10544 жыл бұрын
Does this joints can be use for pipe bridges? (pipelines attached to vehicle bridges?
@gourisankarsamanta76704 жыл бұрын
Yes can be used.
@gourisankarsamanta76704 жыл бұрын
Yes can be used.
@rameshjeshnth6231 Жыл бұрын
Old Hinged bellows remove and re- installed from 30 m high procedure ( how to take and lifting activities).
@parthshah7302 жыл бұрын
Very Nice sir
@meenal24164 жыл бұрын
Great explanation 👌
@prathameshsingh98774 жыл бұрын
do they cause heat loss at the connection point
@gourisankarsamanta76704 жыл бұрын
There is no heat loss.
@sarankathir48573 жыл бұрын
super video
@shivnandan5748 Жыл бұрын
Thanks a lot sir.
@mohammedabdulsalam83915 жыл бұрын
Sir can we loosen or remove the tie rods before installion?
@gourisankarsamanta76705 жыл бұрын
No, it is not recommended. For this reason, tie rods for metallic bellows are tack welded so that nobody can loose it. But for cooling water line rubber bellows, tie rods can be removed if required for pump alignment, thereafter tie rods are to be tightened.
@mohammedabdulsalam83915 жыл бұрын
@@gourisankarsamanta7670 Thank You sir. The problem is it was tightened with Allen key bolts
@bajbaj24754 жыл бұрын
Please what is the meaning of this expansion joint type HM7248 DN 400?
@SANDHYAENTERPRISES4 жыл бұрын
Type 40 is a high-corrugated, highly elastic rubber expansion joint. Due to its corrugation it has very low inherent resistance. It is characterized by its ability to absorb a large amount of movement in any direction. The type and amount of corrugation, installation length and material strength of this type can all be tailored to your requirements. There are also a large number of rubber qualities available, which means that you can select a suitable rubber compound for any application (see the material descriptions on the following pages). Type 40 is mainly used in large industrial plants and power plants, where it compensates offsetting and compression, insulates vibration and absorbs pipe movement. Please Support us
@dhruvpanchal79063 жыл бұрын
We manufacturing expansion bellow in gujarat all types of bellows
@veera73914 жыл бұрын
Please tell me the application of these bellows in ROCKET ENGINES