GP1800R Worx Racing Cooling Kit install

[@gerardotorres9963]

Excellent job my friend I want to ask you is any difference between the one that you install and the one from Riva I know the Riva is a little bit more money, but I saw in one of the videos that you shared you free flow for Riva exhaust

[@QuadStar721]

Thank you! The Riva Racing version works better with their intercooler. So since I will be installing a Fizzle intercooler I felt that Worx Racing was the better option

[@joseluissanjuanvalero4244]

Good job. By the way, what brand and type is the battery installed?

[@bradybish4121]

I knowww this is old but wondering if you ever had to take the pump off again? I work with 3m 4000, 4200 and 5200 regularly and although 4200 is "removable", with enough surface area ive pulled chunks of fiberglass out of hulls.

[@QuadStar721]

Have not had the pleasure of removing parts with that sealant on it. Thankfully

[@henrythompson5624]

What size bit did you use to get that perfect fit

[@QuadStar721]

I used a half inch drill bit and slowly enlarged the hole till the fitting just barley fit then threaded it into the hole.

[@georged.5128]

What do you do with the old pipe that was on it?

[@elbatobeach]

Great idea but what’s stopping the Electrolysis now that you removed the zinc anode ?

[@QuadStar721]

Fresh water so not really worried about it😎

[@raul2502]

Do you have to throw it in fresh water after riding salt with this anode cooling line or at home flush will handle corrosion and stuff. I womder

[@QuadStar721]

I always run fresh water flush after each ride at home. Only takes a few minutes.

[@JuanGonzalez-dt6vp]

Hey nice job, I would like to know what battery you have… thanks

[@QuadStar721]

Hey Juan. The battery is a fire power 490-2525. I bought it from Riva Racing

[@JuanGonzalez-dt6vp]

@@QuadStar721 Thanks 👍🏽

[@matthew2518]

Would this be the same install for my 2013 fzr mate ?

[@QuadStar721]

It is very close to the same as mine. Just the templet for the cut out might be different is all.

[@SlayerHawkX]

I always take out the pump in one peice..

[@SlayerHawkX]

Did u put sealant on the L adapters?

[@QuadStar721]

Yeah I used the 3M 4200 on the two brass L adaptors.

[@SlayerHawkX]

@@QuadStar721 k thx...i saw that they were sorta spinning still..had me worried cause i just baught this..ima bout to do my ribbon delte and wanted to kill 2 birds w/one stone..lol

[@SlayerHawkX]

@@QuadStar721 ok..i just put mine in and i realised that if u turn the box upside down it tightens perfectly..letters are upside down but no reason to cake on sealant cause its not tight on the L ..just an FYI to anyone else..its the same upside down and upright on the inside..🙂🙃

[@stevemayfield8632]

HEY, RED rxt . IL ride with ya anytime Washougal fun

[@georged.5128]

What do you do with the old pipe that was on it?