Homemade 2.5inch Exhaust Muffler | Glasspack style | Stainless Steel

#gpgarage #glasspackmuffler #exhaust
Hello everyone
In this video, I show you how to make a 2.5inch muffler. These glasspack style mufflers are easy to make and provide better gas flow than mufflers with chambers. For this muffler I used ceramic wool instead of glass wool.
In some of the future videos, I will compare the sound of this glasspack style muffler and the flowmaster style muffler that I made earlier.
Link to DIY flowmaster style muffler
• Homemade 3 Inch Exhaus...
Thanks for watching

[@siliconvalleyengineer5875]

Back in 1979 I ran glass packs exhaust on my 327 / 57 Belair. My neighbor's told me when I cold started my car in the morning it shook their home windows

[@That1E_K1129]

That is so creative. I have a FMF power core silencer that I have been trying to save but it's pretty beat and I want to keep the inlet and the end cap from the pipe and I'm going to steal your idea and create one myself thank you for this!

[@caveone-365]

I've used similar ceramic wool when personally fabbing my own mufflers. I believe it was 'FibreFrax' or something like that. Works well and usually won't blow the packing out unless it's a higher h.p. application. Stainless steel rock wool works well in conjunction with the ceramic blanketing. You wrap the perforated core with the stainless, then the blanketing on the outside which makes the wadding more resistant to blow-out. Nice looking can though. I would call it more of a 'resonator' than a glasspack though. The inside of something like a cherry bomb is definitely different.👍👍

[@GPGarage1]

Thanks. Yes, that combination is certainly a better option, but in my case this is good. It’s definitely a resonator, not a glasspack muffler.

[@gmac8852]

I would be proud to have work like that under my rides.

[@GPGarage1]

Thanks

[@ProjectDefi]

Great video

[@archieanderson2945]

very nicely built great quality

[@GPGarage1]

Thanks

[@CharlesNewkirk-lb6uh]

Nice and easy!😊

[@mattstewart6756]

Nice build! What kind of tape did you use to wrap the ceramic wool? Thanks in advance.

[@GPGarage1]

Thanks. I use paper masking tape, but wire or something else can also be used, because it only serves to make it easier to insert the packing material into the muffler.

[@thomasv.workacc3358]

So when you gonna sound test that 3" Flowmaster like muffler you made a few vids back?

[@GPGarage1]

Next week will be video.

[@eyadfawaz3194]

Very nice .. but please what is the name of the white material ?

[@GPGarage1]

Thanks, it's ceramic wool.

[@eyadfawaz3194]

@@GPGarage1 Thank you sir

[@glockman8091]

Hey man how bout makin a flowmaster 40 for us viewers. I for one would love to see it.

[@user-qb9wc6qw3f]

do you know how to make the exhaust sound more bass like in a 125cc to 150cc motorcycle?

[@glockman8091]

Hey man just found your video on the flowmaster so pay no attention to my first comment.

[@edwinallenturbanos6864]

which is better ceramic wool or fiberglass wool or basalt fiber?

[@CoryBan777]

where do you get the perforated sheet metal?

[@meskalin64]

How many decibel does this lower with?

[@walijumaat2158]

so what is the material you use for packing inside the muffler?

[@GPGarage1]

Ceramic wool

[@Ozn3C]

So when you have to repack, you'll have like to unweld the pipe?

[@GPGarage1]

Yes, cut one side and reweld.

[@KeNah0615]

Esos son silenciadores, me gustaría ver un video donde hagas resonadores

[@bikerbrego]

Can you make a video on the vehicle running with sound

[@GPGarage1]

Yes, I will make a video.

[@bikerbrego]

@@GPGarage1 thank you

[@tommys2979]

4:19 how you tack your part when someones watching you haha

[@michaellecastillo9189]

is this silencer?

[@carneum5128]

Yo first😁

[@carneum5128]

Love it😍

[@martisticmartin]

Veery nice my friend, how much does it cost you to make a muffler? (Material)

[@GPGarage1]

Thanks. This is all from waste material. I don't buy anything.

[@hilkiachris6252]

after you are done try the sound too. I'm curious about the sound of the exhaust

[@GPGarage1]

Here's how it sounds on the BMW 523i I6. kzbin.info/www/bejne/eIK9h5h8i5KNi80

[@SR-RJ-]

Nice

[@GPGarage1]

Thanks

[@SR-RJ-]

@@GPGarage1 tractor ka exhaust muffler please

[@dedywahyudiyanto9207]

Wish that i can get one of those 😀😀

[@avtomexanikiskandar5594]

Klass

[@silencermodification1563]

Nice ✨️✨️♥️♥️

[@GPGarage1]

Thanks 🙂

[@bendoherty7721]

I know what I’m doing on nightshift next week

[@warmachinebodybuilding]

Excellent video and gob bro. Likeeeeeeeee by Warmachine bodybuilding of garage Gym italy 🇮🇹

[@GPGarage1]

Thanks bro 🙂

[@Gigi-ei4ew]

Bravissimo

[@GPGarage1]

Thanks

[@cosmogalegodemangueira2629]

Família tudo bem eu sou cosmo galego conserto escape de motos em geral 👍🏻

[@WARD5KUSTOMZ]

Why not make a solid core?

[@GPGarage1]

I also worked with a solid core and I didn't notice any difference, and this way it's easier for me. When I work like this, I always cut a perforated tube 2-3mm shorter than the muffler case, to have a little tolerance for packaging

[@WARD5KUSTOMZ]

@@GPGarage1 I drilled several 3/8 holes in the core. Lost count of the holes. Lol.

[@GPGarage1]

That's very boring job. 😄😄

[@WARD5KUSTOMZ]

@@GPGarage1 true. But was well pleased with the sound

[@GPGarage1]

Most importantly, the effort paid off.

[@polbitancor8116]

Soundcheck?

[@GPGarage1]

kzbin.info/www/bejne/eIK9h5h8i5KNi80

[@endall6783]

I want to hear how they sound that would make this post a lot better. I guess it'll stay OK. Sorry my 2 cents don't mean anything!!

[@GPGarage1]

Here is how it sound on Bmw I6 kzbin.info/www/bejne/eIK9h5h8i5KNi80

[@PaulCoomber-g7h]

Sometimes these videos leave me feeling very dissatisfied. This one did. Why not supply a drawing as well, an explanation regarding the sort of engine it's designed for, and how these design parameters were decided on. Designing silencers or mufflers is as much an art as it is a science.

[@enriqueorlandovega9831]

No tiene sentido de sirculacion de los gases.sr conecta de cualquier manera

[@LACTS-be7pr]

Homemade and the guy has a shop...

[@bestfriend-ix1hr]

9990o

[@bestfriend-ix1hr]

9990o9