2009 Hyundai Santa Fe V6 PCV Valve Replacement

[@shane250]

Just did the PCV valve on my 2010 Santa Fe 3.5. it's almost exactly the same procedure. The worst part was getting the PCV hose out. They put the tabs for the clamp facing BACKWARDS... So that made me work an extra 20 minutes. When I put it back, I made it face forward. Since I already took the throttle out, I cleaned it. Turns out, that after 176Kkm (about 110K miles), the PCV rattled about 70% good as the new one (and I used original Hyundai for the new one), and the throttle wasn't that dirty at all. I guess I take very good care of my car. It doesn't burn even a drop of oil between changes, and never has. I did the PCV as preventative maintenance.

[@gqautodiagnostics]

Hello! Thank you for sharing your repair experience. Good job replacing the part! Have a great day and God bless you 🙏

[@adenlove9207]

Excellent video and highly appreciated. However, question to be raised do you have to disconnect the Battery cables during such task.

[@gqautodiagnostics]

Hello. Thank you for posting your question. No you do not need to disconnect the battery.

[@Mazenallaham]

Thanks! Could you make a video on how to replace EGR valve on this car model? Couldn't find any over the internet.

[@gqautodiagnostics]

I will work on it!

[@TheTomppaa]

Do these engines have EGR? At least my 2.7 doesn’t have it.

[@adenlove9207]

Since the Throttle Valve was disconnected why you don't take the opportunity to clean it ?.

[@donaldwarlick4361]

thta would have been part of a tune up a clean throttle body is very important

[@DesignBuildFixReview]

Was there an engine code or problem that let you know to replace PVC?

[@gqautodiagnostics]

Hello. Thank you for posting your question. No, there were not codes or problems. Replacing the pcv valve was part of a full tune up.

[@DesignBuildFixReview]

@@gqautodiagnostics Cool, I am looking to replace MAF in santafe 2007 I plan on buying oem part don't want to even try a badly made part. By the way I believe the MAF code I am getting also causes a ESC off I have at the same time. Very odd connection. Also getting hard starts which is related I believe as well. P0102 showed up and also esc off at the same time. OBD doesn't have esc code its odd.

[@abdullahmubarak-g4y]

Thanks. it is same as my Azera 2008 as i was searching pcv location

[@alibalnuor2818]

Great video bro

[@gqautodiagnostics]

Thanks!

[@maryN-c6t]

Great video

[@cristianayenao4189]

The batery conect 🤔🤔

[@angloedu5499]

Good video.

[@gqautodiagnostics]

Glad you enjoyed it

[@adenlove9207]

Do you have to use Teflon Tape on PCV

[@gqautodiagnostics]

Yes

[@JCGible]

🙂