GR Supra Catted Downpipe Install | CG Precision

[@emantsal1643]

@ 5:07 when you torqued it you added about 5 extra foot pounds. The socket should be @ 90° to the torque wrench to get exact torque. It was correct when you first put it on the O2 sensor but u spun it facing forward.

[@jsavoni6478]

What do you torque it at?

[@velr50gt]

Don’t like how it sounds with that down pipe. Thanks for showing this.

[@markjmaxwell9819]

This down pipe and the ETS catted down pipes are my favorites........ 👍 An E50 tune and intake should be pushing 480hp ATW.... E50 is available in Arizona.... Like the injen evolution intake.... The exhaust is personal preferance wether stock or an inch bigger....

[@scott4101]

Great install video, did you end up getting a check engine light with this DP?

[@lfsmith7]

I'm also interested in whether or not you guys have had a CEL yet. Any update?

[@scott4101]

I'd also like to know

[@Speedindustry]

ZERO COMPLAINTS

[@nozadowa1420]

why no cracks??

[@Steveindajeep]

You guys still no CEL with this?

[@markjmaxwell9819]

One of the best value for money mods you can do to a new Supra. A slightly larger diameter downpipe with a high flow catalytic converter. Should free up at least 10 to 20hp.

[@Speedindustry]

It really is! Thanks for the support and watching make sure that bell is rang!!

[@65sohc]

@@Speedindustry I just installed mine You can't feel 10 hp. But you can sure as hell feel and hear the difference this thing makes. I'll bet horsepower is within single digits of a catless pipe with the stock turbo.

[@networkbymatt6867]

@@65sohc You can't feel the 10 hp but you can feel the difference?

[@EmanuelRolla]

on the catted downpipe won't get a check engine light?

[@KevinKJohn]

I have the AMS catted downpipe on my untuned Supra, and have no CEL.

[@播州地区]

言葉わからないけど、チャンネル登録してます。 日本では、GR スープラは一般人は初期枠の500台の方がやっと納車で、枠から外れ増産枠に滑り込めた自分は幸運ですが、納車は未だ先で新車購入で初めての一年以上待ち状態です。後3〜4ヵ月程度で納車予定です。待ち切れ無い パーツ交換の参考に何時も楽しみに拝見しています。　出来れば日本語翻訳欲しいです。

[@Speedindustry]

there is no translation for this, THANKS! Keep watching make sure you are Subscribed we have a lot of fun things coming!

[@kaj750]

If someone could give me a tip for getting that V band loose so I could get the downpipe out, that would be great LOL first V band I've ever used that does not have a hinge at the top.

[@mrwhite-180]

Considering getting this for my M340i. Has anyone actually put their car on a dyno to measure the HP/Nm change or seen another video where the performance was measured?

[@rottary89]

Any feedback regarding CLE for this product?

[@666Valo777]

it does sound good

[@itzandrik]

No CEL ?? Still ?

[@beethoven8256]

Still no CEL? Any updates?

[@alexmachado8842]

Is this better than the 6in mst dp?

[@2006chunming]

How much power does a downpipe add to a stock exhaust?

[@ttran626]

Which catted downpipe is loudest

[@fhosho8176]

How tight should the V Band be? Do you have to retighten it after a few runs?

[@Speedindustry]

good and tight

[@NicholasZak]

Sounds great! Not obnoxious and more so exotic sounding. I would like to order one for mine 👍🏻

[@Speedindustry]

The link is above directly to this product. www.speedindustry.com/gr-supra-hi-flow-race-catted-downpipe-a90

[@Speedindustry]

make sure to check the sale this weekend! speedindustry.com/toyota-gr-supra-mkv-performance-parts Also THANKS! Keep watching make sure you are Subscribed we have a lot of fun things coming!

[@bicabone]

Is it really necessary to remove the entire exhaust for a downpipe installation?

[@Speedindustry]

Blake Icabone no. We have now down it with out.

[@kusko8656]

This is one of the easiest one i ever done, try upgrading the DP on my RS3,is so difficult that i decided to keep the stock one. IT SUCKS!!!

[@hektr19]

I’m assuming same process for a G20 m340I

[@Speedindustry]

Hector Cabrera it should be

[@Lukensm85]

How much did you tighten the vband at the mid-pipe?

[@Speedindustry]

Matt Lukens Nice and tight. You should not be able to over tighten it.

[@a91editionsupra14]

The first

[@Speedindustry]

Thanks.

[@jsavoni6478]

Will the CG connect to stock exhaust fine?

[@Speedindustry]

YES 100%

[@jsavoni6478]

@@Speedindustry I was going for thr AA dow pipe due to it being approved... the CG has the same catalytic coverter... how is it not approved? Because of the bigger diameter?

[@AR_4Foglio]

He mentioned that compared with the catless dp, "QUOTE: The horsepower number don't see a dramatic difference". So, how much is the actual loss of hp if anyone know.

[@manny619ish]

I wounder how much torque you lost with that down pipe and no tune.

[@referencechannel996]

You don’t