You've got the best video explaining how to tune that thing in to the sweet spot. Thanks.
@jamiesmagictourch2 жыл бұрын
Thanks!! Really simple and straight to the point! Cheers!
@chrishall83092 жыл бұрын
Great vid to refresh my memory after the course! Keep up the good work guys.
@AlexKunstar3 жыл бұрын
Great video! I did roughly this intuitively, but now this will help me fine tune it even more. I usually use my 5in1 to turn it when it's sticking. Completely taking it apart and cleaning it once in a while gets them working like brand spanking new too.
@ColinBurmingham3 жыл бұрын
Thank you this is really helpful, there's not much info out there on dailing in the clean shot.👍
@P51D-Mustang3 жыл бұрын
Yeah, Quick question Guv, Wouldn't it be easier to bleed off all the pressure first to then adjust the clean shot valve, instead of wrenching it under pressure?
@richardwhatmough48263 жыл бұрын
Great video! I kind of figured this out but it’s good to have expert advice. The valve definitely puts extra strain on your machine though when using LP tips
@xAlienAdox2 жыл бұрын
Amazing explanation
@tentyphans2 жыл бұрын
Thx, you help me with my problem 🙂
@thedalz5308 Жыл бұрын
Hi great video, may I ask a quick question, do u get the spray pressure and pattern correct before installing the cleanshot
@donatas235 Жыл бұрын
Thanks!!
@leer.96412 жыл бұрын
Not sure why people don’t just watch the Graco video. If you’re spraying over 800psi (that’s everything for me), just dial the Clean Shot as far as it will go. That’s ‘dialed in’. 🤷♂️
@lsmsp20092 жыл бұрын
Great video. I’m new at this. Quick question… do you need to increase the pressure when spraying with a longer extension? Like a 30 inch?
@sprayingmakessense2 жыл бұрын
slightly yeah.. just keep checking fan pattern and keep it as low as you can't get it
@Jackyejonatas2 жыл бұрын
Obrigado pelo vídeo. Great video. Tks
@Tigerratcat2 жыл бұрын
Isn’t it pointless unless you have an extension? Or are you just showing it for demonstrating purposes?
@garethdavies75642 жыл бұрын
im thinking of getting one soon ... would it be a good idea for me to take it part before i use it and put some vaseline on seals and threads?
@sprayingmakessense2 жыл бұрын
no reason to, just get using it 👍
@jbpaintingplasteringltd15423 жыл бұрын
Have you found any problems we have had.problem.where it's pour out of the join of the clean shot only used twice worked well first time 2nd time had paint pouring out of the join
@sprayingmakessense3 жыл бұрын
just tighten it up a bit on the nut. They get better with age so dont give up non it
@IstealXmas3 жыл бұрын
No offense but that only reduces spitting when it's on an extension. That setup you are using is completely pointless
@kevindixon72003 жыл бұрын
My thoughts exactly Tom,if anything using a cleanshot straight on a gun with no extension is pointless and creates problems.If your getting spits direct from the gun then check your needle is sitting correctly and use the cleanshot with your extensions.I have found closing the cleanshot fully and then a slight twist anti-clockwise gives you the sweet spot
@AvtarSingh-hq8mx3 жыл бұрын
Not really, I do cabinet refinishing and this thing solved my issues.