In this quick tutorial you will get an understanding to the benefits of switching to the Graco Fusion ProConnect (PC) Spray gun. I will show you how quick and easy it is to build, break down and clean.
Пікірлер: 5
@georgebeebeatvetech38252 жыл бұрын
Hello, Great video! Maybe you can help me? My cartridge is seized in the gun. I didn't tighten the black cap all the way, and the cartridge popped up, and "A" and "B" mixed. I tried prying it off with a screwdriver like when changing under normal conditions. However, it won't come out. Any suggestions on how I can remove it without damaging the gun? Thanks, George
@Mil-SpecLiner2 жыл бұрын
Hey George! Thanks for your reply. I’m sorry to hear that your cartridge is stuck on your gun. Mixing A and B is never a good time before it hits the mixing chamber. I would try to pry under both sides of the cartridge with some strong flathead screwdrivers. You’re not going to harm your fluid housing. Once you get it off, remove any other remaining parts from the fluid housing and soak the fluid housing in your gun cleaning solvent. Clean all parts thoroughly, grab a new cartridge, rebuild your gun and get back to spraying. Let me know how that goes. If you’re still having a hard time, give me a shout tomorrow and I’ll see about getting on the phone with you to see how I can help. Good luck! Phillip
@greencore6662 жыл бұрын
the screw at the bottom of the handle comes out and screws into the catridge and releases it.
@ionutp32 жыл бұрын
I use an older one so let me see how it's working this new one tanks anyway
@Mil-SpecLiner2 жыл бұрын
They make a kit to convert your Fusion AP to this Fusion PC gun. Feel free to reach out to us to learn more.